Reviews Input Gears

Max Motosports Transmission Replacement for Peerless Toro Exmark Scag 700-070A 14176 4127203 481580 1-323500 39490001

  • 1 x Brand New Transmission, 9 spline input shafts.
  • Specially formulated transmission grease-Provides superior lubrication and performance.
  • Die cast aluminum housing- Offers outstanding heat dissipation and durability, Oil-impregnated bushings, With needle bearings on input shaft.
  • Neutral start capability, allows the installation of a switch to sense if unit is in gear or in neutral.
  • Heat-treated gears process ensures maximum durability.
Check Stock

CHUSE Digital Power Controller Suitable for CHUSE C18/C22/P1 Handpiece, 3.5mm*1.5mm interface

  • There are 9 gears (1-9) by wire control. The default startup is gear 5. The gears can be adjusted according to the items required..
  • Long press the on/off key for 3 seconds to start / close the remote control, and click to run / pause the machine..
  • One end of the charging head connected by wire is USB interface, and the end connected to the machine is 3.5mm * 1.35mm..
  • Input: 100-240V, output: 12V, 1A, Weight: 90g, box size: 115 * 78 * 40mm.
Check Stock

Mini Spot Welder, Battery Handheld Spot Welder 6 Gear Adjustable Mini Spot Welder Machine with Spot Welding Pen and Nickle Sheet for Battery for Craftsman/Beginner (Spot Welder A)

  • Take note to fully charge the battery before use* Made of aluminum alloy material, with anodic oxidation surface, wear resistant and beautiful. It can welding hundreds of welding points on commonly used nickel-plated sheets within 0.1mm-0.12mm..
  • 6 gears of output power adjustable, welding more accurate. Output gears indicator light(red), the number of indicator light corresponding the output gears. Equipped with electricity indicator light(blue), different numbers to shows different electric quantity, 1 light(5-25%,flash003c5%), 2 lights(25-50%), 3 lights(50-75%), 4 lights(75-100%)..
  • Automatic mode and manual mode adjustable, with output mode indicator light, automatic mode-left yellow light turn on, manual mode-right yellow light turn on..
  • USB-C interface 2A input, 6700mAh spot welding machine can be fully charge within 3 hours. 400mm long spot welding pen for flexible operation. Mainly used in the welding of nickel sheet of cylindrical battery, NI-MH battery, nickel cadmium battery etc..
  • Gold-plate terminal welding pen, with fine conductivity and low contact resistance, quickly detachment and easy carring. 2mm thicken pure copper strip, supperlow internal resistance to increase overcurrent capability..
Check Stock

Spot Welder with Soldering Iron, 11000mAh Soldering Iron Kit Electronics, Adjustable Temperature Welding Tool, Portable Spot Welding Equipment for DIY 18650 Battery, Soldering Iron Stand

  • ...aterials. The spot welding materials can be nickel, iron, stainless steel, aluminum, etc. 0.1-0.2 mm in thickness material..
  • ✔Large Capacity - The spot welder has a large capacity of 11000 mAh, built-in rechargeable 2 electric power lithium batteries, discharge current 003e650A, environmentally friendly. Type-C 2A input, it can be fully charged in about 3 hours. We can also use it to charge our other devices..
  • ✔Protection Measures - The portable spot welder with soldering iron has perfect overcharge and over temperature protection functions. Its unique overheating protection device automatically cuts off the power when overheating occurs, and it will automatically shut down without any operation for 8 minutes, allowing you to use it more safely..
  • ✔Beautiful design: The output temperature range of the electric soldering iron is 0-788 degrees Fahrenheit, it heats up quickly, melts tin in one second, and can be operated with one hand..
  • ✔Abundant equipment: electric welding host, electric soldering pen, electric soldering pen, Type-C charging cable, 5M nickel sheet, electric soldering iron holder, replace the iron tip..
Check Stock

Portable Spot Welder, USB-Charging Upgraded Mini Spot Welder, Adjustable Gears Spot Welding Machine, Battery Spot Welder with Welding Pen, 5M Nickel Sheet, Type-C Fast Charging DIY 18650 Spot Welder

  • ... nickel, iron, stainless steel, aluminum, etc. 0.1-0.2 mm in thickness material..
  • ✔Large Capacity - The spot welder has a large capacity of 7500 mAh, built-in rechargeable 2 electric power lithium batteries, discharge current >650A, environmentally friendly. Type-C 2A input, it can be fully charged in about 3 hours. We can also use it to charge our other devices..
  • ✔Welding Pen - The terminal of the welding pen is gold-plated, which can pass a higher current. The 7mm spot welding special red copper has ultra-low resistance and anti-oxidation. The welding pen has a length of 40cm/16 inches, which is flexible and convenient for us to use..
  • ✔Protection Measures - The portable spot welder has perfect overcharge and over temperature protection functions. Its unique overheating protection device automatically cuts off the power when overheating occurs, and it will automatically shut down without any operation for 8 minutes, allowing you to use it more safely..
Check Stock

Electric Hoist 440LBS Electric Winch, Wire Remote Control Power System110vSteel Electric Lift, Household Small Crane with 2 Lift Slings Straps

  • 【Sately Design & Accessories】The electric hoist comes with high-quality copper core motor which has the good insulation and electrical conductivity.Bold all copper rewinding motor resistant to high temperature, corrosion, rust, ensure safe operation..
  • 【Precision Gears & Precision Gear】The miniature electric hoist with standard silicon steel lengthened stator and rotor, the same power consumption and higher output, greatly improved work efficiency.Also using alloy gears, the secondary quenching strength is improved and the compression resistance is more wear-resistant..
  • 【Dual cooling】This electric hoist increases the high-speed heat dissipation of the fan, and the heat dissipation structure of the aluminum alloy shell dissipates heat as a whole..
  • 【Single/Double Slings&Large Capicity】The electric hoist with 2 modes. Single-line max lifting weight is 220lbs, 19.6ft lifting height.
  • Double-line max lifting weight is 440lbs, 39.3ft lifting height.
  • 【Wide Application】It's easy to operate. The electric hoist it's suitable for lifting small engines, factories, warehouse, home decorations ect. Available to use for your various needs..
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

Pure Nickel Strip- 99.6% Nickel for 18650 Soldering Tab for High Capacity Lithium, Li-Po Battery, NiMh and NiCd Battery Pack Battery and Spot Welding, a U.S. Solid Product (0.2x8x100mm, 100pcs)

  • ...ti-fall. 2mm Thickened pure copper strip and imported MOS tube can save energy and can provides longger service time. The welding machine itself has overcurrent protection, low voltage protection, overvoltage protection, and overtemperature protection. Intelligent output current. Can guarantee safe use..
  • ✅【Quick Input & 9 Gears Adjustable】：This spot welding equipment adopts Type-c interface, 4 hours fully charge under 5V 1A input. Built-in high-rate polymer power cell, the maximum output current is up to 650A, and it can continuously weld thousands of points after being fully charged. 9 gears of output power adjustable, 1gear(lowest) and 9gear(highest)..
  • ✅【With Charging Control Module & Indicator Light】:With output power and remaining power indication, there are two output modes: 1.5s timing trigger output and automatic detect welding pen output. ---This spot welding kits tools has 4 dual-color indicator lights, the power indicator flashes when charging.When all four lights are on, it is fully charged.It will automatically shut-down after 15 minutes of no use..
  • ✅【With Welding Pen & Portable Design】:Integrated Gold-plate terminal welding pen, with fine conductivity and low contact resistance, quickly detachment.The compact and portabl....
Check Stock

SGCB Pro 5” RO Rotary Polisher for Auto Detail Polishing Swirl Scratch Removing 5/8” Spindle Thread Soft Start 6 Variable No Load Speed Dial Control Car Buffer Waxer 2-Deduction w/ 5” Backing Plate

  • READY-TO-HAND & HIGH EFFICIENCY DELIVERING: FORCEFUL MOTOR ENGINE --- Input Power: 800w-1200w, The Output Rotary Speed Of Our SGCB Polisher Ranges From 0-700 Rpm To 0-2500 Rpm! With Timely Adjusting And Powerful Torque Force Output, It Can Always Produce And Maintain Constant Speed! The Simple Speed Diagram Can Enable You To Learn It Immediately, Very Easy To Understand And Operate! Fatigue, Tireness And Pain Relieving And Avoid Dropping The Heavy Polisher Onto The Car And Causing Any Damages!.
  • FAR MORE POWERFUL TORQUE OUTPUT: DOUBLE SPEED REDUCTION GEARS SYSTEM --- Adopting 2-Level Speed Reduction Gears Is One Of The Most Prominent Features Of SGCB Polisher! Unlike The Ordinary Ones Driven By Motor Directly, The Double Gears Delivery The Driving Force From The Powered Shaft To Backing Plate, Largely Transferring The Rotary Speed Into The Torque Especially In Lower Speed Gear! Even Forceful Polishing Strength Delivering Than Other Ones Do And Never Stop Or Break Off In The Polishing..
  • EASY, COMFORTABLE WORKING EXPERIENCES: ERGONOMIC DESIGN --- Adopted By Premium & Hard Plastic, Well Crafted In Ergonomic Shape According To The Features Of Human Hands, The Machine Body Feels Smooth Holding Sense And Comfortable In Work! Furthermore, The Inte....
Check Stock

Mophorn 18pcs/Set CJ0618 Lathe Mini Lathe Gears Metal Cutting Machine Gears Lathe Gears Metal Exchange Gear (18pcs/Set)

  • 18 PCS Gear Kits: Pack of 18 Set: 2 x T80 gears, 2 x T60 gears, 2 x T50 gears, 2 x T45 gears, 2 x T40 gears, 2 x T30 gears, 1 x T35 gears, 1 x T25 gears, 1 x T20 gears, 2 x Metal change gear set, 1 x timing belt pulley..
  • High-Quality Metal Material: Made of high quality metal, rust-proof treatment on the surface of gears for durability and long time use..
  • Precision Polished: The gears are milled by pricing milling skill to ensure high precision..
  • Easy to Assemble: A mounting wrench is provided that it is easy for your instant installation..
  • Extensive Compatibility: 18pcs/set CJ0618 gears is compatible with mini lathe, metal cutting machine..
Check Stock

Gears of War 5 Video Game Collectors Bundle with EXCLUSIVE Ammo Tin Including Grey Beanie Action Figures DLC Content And More

  • CREATE YOUR OWN GEARS OF WAR BATTLE SCENES: From slamming down hordes of Locusts to exterminating entire hives of the Swarm, the Gears have proven their muscle. Now you can recreate entire Gears of War battle scenes with these collectible plastic figures!.
  • BUILD YOUR GEARS 5 NANOFORCE ARMY: The Gears 5 Nanoforce series features a collection of Gears 5 favorites. From enemies to heroes, you can lay out your own armies and have them square off toe-to-toe!.
  • APPROVED COG QUALITY: Crafted from durable plastic, this collectible Gears of War series figures is designed to give you longevity in their use. Measuring at 2 inches tall, each figure is detailed to send your mind right back on to the battlefields of Gears 5..
  • PERFECT FOR PLAY AND DISPLAY: Whether you love the idea of creating your own sandbox battlefield with these figures, or you're an avid fan of the Gears of War franchise, these figures are perfect for rough play or proud displays..
  • A GEARS OF WAR FAN MUST-HAVE: The Nanoforce series is dedicated to bringing a splash of army-men style fun to any Gears fan's collection. Officially licensed these figures are the perfect accent to your myriad of Gears of War treasures..
Check Stock

Learning Resources Gears! Wreckergears, 47Piece, LER9237, Multicolor

  • Celebrate 25 years of gears! In 2019 and set imaginations in colorful motion! Kids develop creativity, imagination and fine motor skills by building. Chunky spinning gears snap easily into place and help kids develop fine motor skills. Compatible with all other gears! Gears! Gears! Sets for even more imagination and fun. Get your gears moving!.
  • Discover: invite “little engineers” to get their hands and mental gears in motion for imagination, early learning, and open-ended play with this beginner set.
  • Develop: boost fine motor skills while promoting reasoning as children create moving experiments.
  • learning gets more intricate as children’s abilities advance.
  • One-piece set: activity set Includes 47 colorful gears (blue, green, yellow, red, purple), and activity guide..
Check Stock

Mophorn AP-A88 Electric Recliner Motor Replacement Kit DC Motor 21\ Stroke Okin Power Recliner Motor Linear Actuator for Electric Sofa Massage Chair Reclining Chairs Motor

  • Powerful Linear Actuator: Product Size: 21 x 7.2"/53.3 x 18.3 cm (L x W).
  • Made of aluminum tube and PA6 plastic housing, the thick electric linear actuator is rust-free and super-strong. It features high-sensitive built-in limit switches, which can prevent the electric motor from the dry burn. A high-quality product with CE certification..
  • Retract & Extend Function: The linear actuator provides max.1000 N pushing force and 1000 N pulling force, which can powerfully lift or down electric devices. Stroke Length: 13"/330 mm.
  • Low Noise Running: The metal gears adopt advanced turbine design for stable running. Along with powder coating gears, the power recliner motor actuator works quietly at a noise level 48 dB..
  • Hassle-Free Installation: It is very labor-saving to install the linear actuator without a complicated process. The product can work directly with included complete accessories, such as an 8-suffix AC line, DC line, power adapter, hand controller..
  • Universal Compatibility: The linear actuator is adjustable and removable to satisfy your different needs. It is incredibly practical for opening doors, raising flat screen, or regulatin....
Check Stock