Reviews Input Board

VSDISPLAY HD-MI DVI VGA Audio LCD Controller Board Fit for 17 inch 4:3 1280x960 DV170YGZ-N10 DV170YGM-N10

  • ...have 4:3 1280x960 DV170YGM N10 / DV170YGZ N10 LCD. This board (resolution 1280x960) can solve the cut off screen problem on the Gen 3 cabinets immediately. Please verify that you have a GEN 3 LCD Screen. Screen part number will match DV170YGZ-N10 or DV170YGM-N10. Will not work with any other screen..
  • Video Input: HD-MI DVI VGA Audio Input: HD-MI Audio Output: Speaker Connector.
  • Come In Standby Model When Not Input Signal. Standby Model 003c1W..
  • Recommend Power Adapter Spec. Input Power Adapter: 12V DC, 2A or More than 2A. (VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output ,Power Supply, US Plug , Fit SC24W-1202000U, Fit for All Types of VSDISPLAY LCD Controller Board.) Compatible Speaker for The Controller Board : VSDISPLAY Speaker 8ohm 2W 70mmx33mmx15mm 4Pin Cable for LCD Controller Board M.NT68676.3 (new version) and Other Monitor Driver Board which Have PH2.0 Speaker Connector..
  • Packing list: 1× HD-MI VGA DVI LCD Controller Board 1× Screw And Nut For GND Connection 1× Keyboard With Cable. There is No Power Adapter in The Packing List. If need , you can get one from VSDISPLAY store. Any question,please feel free to contact us. (First click sold by 'Shenzhen Weisi Electronics Co., Ltd', then 'ask a question').
Check Stock

Ximimark 1Pcs ESP8266 Network Relay WIFI Module 220V 10A DC 7-30V 4 Layers Board TVS Input Automatic Protection

  • The ESP8266 Wifi module is designed with a 4-layer board. It is safer to use the relay PCB pin anti-climbing design. The access control server passes the TCP CLIENT mode. Controlled by the HTTP protocol..
  • Input overvoltage protection, TVS input, automatic protection will run when the voltage exceeds 33V. Single optocoupler isolated input, TVS input protection..
  • Wide voltage input, input voltage: DC 7V - DC 30V, input overcurrent protection..
  • 220V 10A relay, one normally open, one normally closed. An output status indicator, an input status indicator..
  • Board dimensions: 65 × 40 × 20mm (1mm = 0.0393inch).
Check Stock

AITRIP D1 Mini WiFi Dev Board,Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 6)

  • （pack of 6 ）This D1 mini module is a mini WIFI board based on ESP-8266EX..
  • Our D1 mini development board is 100% compatible with Arduino WeMos and can be programmed in Compatible with Arduino IDE..
  • Support OTA on line.Compatible withArduino compatibility. Using Compatible with Arduino IDE for programming..
  • This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
Check Stock

VSDISPLAY HD-MI VGA DVI Audio LCD Controller Board for 21.5\ 23.8\ 1920x1080 30Pin LCD Screen T215HVN01.0 M215HW03 V1 V2 M215HGE-L23 M215HTN01.1 LM238WF5-SSA1 LM238WF1-SLE3

  • Compatible Work With: 21.5inch 1920x1080 T215HVN01.0 M215HW03 V1 M215HW03 V2 M215HGE-L23 M215HTN01.1 23.8inch 1920x1080 LM238WF1 SLE3 (Note: This Controller Board Will Not Work for The LM215WF3-SLA1 LCD Display).
  • HD-MI DVI VGA AUDIO LCD Board Work for LVDS Interface LCD Screen.
  • Video Input: HD-MI DVI VGA Audio Input: HD-MI Audio Output: Speaker Connector.
  • Recommend Power Adapter Spec. Input Power Adapter:12V dc More than 3A. (VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output ,Power Supply, US Plug , Fit SC24W-1202000U, Fit for All Types of VSDISPLAY LCD Controller Board) Come In Standby Model When Not Input Signal. Standby Model 003c1W.
  • Packing list : 1× HD-MI VGA DVI LCD Controller Board M.NT68676.3 (new version) 1× USB Cable for LM238WF5 SSA1 Touch Screen 1×Inverter Board 1× 30Pin Signal Cable 1× Keyboard With Cable (Please Note There is No Power Adapter in The Packing List.).
Check Stock

1pcs 1-Bit AC 220V Optocoupler Isolation Module

  • Output TTL level can be detected with the microcontroller. The power supply can be 3-5V.
  • the PLC input terminal of the PLC COM power supply 24V input termination of the board signal output OUT, optocoupler board GND power negative.
  • When the power module in the power of the board after the white wire frame can not touch any device .. because it is high voltage. Note the safety of electricity.
Check Stock

VSDISPLAY 14.9\ 1280x390 LCD Screen LTA149B780F with HD-MI DVI VGA Audio Controller Board M.NT68676, for DIY 1up Cabinet/Car Gauge Cluster/Digital Marquee Monitor

  • 14.9" LTA149B780F 1280x390 LCD Screen ,HD-MI DVI VGA AUDIO LCD Controller Board work for screen..
  • 14.9 inch special long strip industrial display , LVDS interface LCD screen, Brightness 400 cd/m² (Typ.) Contrast Ratio 500:1 (Typ.) (TM) .Fit for Game display, car monitor..
  • Audio Input: HD-MI,Audio Output: Speaker Connector. Can work with :VSDISPLAY Speaker 8ohm 2W 70mmx33mmx15mm 4Pin Cable for LCD Controller Board M.NT68676 HD-MI DVI VGA Audio input.
  • Input Power Adapter: 12Vdc More than 2A. Power Size:Connector 5.5mmx2.1mm , help to notice there is no power adaptor in the packing list. Recommend adapter :VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output,Power Supply, US Plug,Fit for Many Types of VSDISPLAY LCD Controller Board.
  • Packing list : 1× HD-MI VGA DVI LCD Controller Board M.NT68676 1× 14.9inch LTA149B780F 1280x390 LCD Screen 1× LVDS Cable 1× Converter Board 1× Keyboard With Cable 1x instruction ( Help to notice , help to notice there is no power adaptor and speaker in the packing list.) Please free free to conact us if you have any question (First click sold by 'Shenzhen Weisi Electronics Co., Ltd', then 'ask a question').
Check Stock

ACEIRMC 6pcs ESP8266 D1 Mini WiFi Dev Board ESP-12 ESP-12F NodeMcu Mini Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino

  • This is D1 mini , it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini.
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our mini development board compatible with Arduino WeMos and can be programmed in the for Arduino IDE..
Check Stock

ACEIRMC ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module for WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini 5pcs

  • This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, Compatible with WeMos D1 Mini..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB....
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock

DC 24V PLC Control Programmable Logic Controller FX1N-24MR Industrial Control Board 14 Input 10 Output 24V 5A PLC Transistor Output

  • High Performance: This PLC industrial control board can support connecting text screen and connecting touch screen, which is stable and reliable..
  • Premium Quality: This PLC industrial control board is made of high quality electric component, which has reliable quality and long service life..
  • Compact Size: This PLC industrial control board has a compact small size, which is portable and easy to operation..
  • Wide Application: This PLC industrial control board is mainly used in a variety of industrial automation control applications..
  • High Speed Input and Output: This PLC industrial control board is high speed 16 Input 16 Output..
Check Stock

KEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino

  • This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
  • Uses I2C input, just occupy A4 and A5 interface on the control board.
  • Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
  • Servo power supply independent V + input up to 6V.
  • How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..
Check Stock

HDMI VGA 2AV Auido Input LCD Controller Board for 15.6 LP156WH1 LTN156AT01 N156B3 B156XW01 1366X768 30Pins LCD Screen

  • Video Input: HDMI VGA AV1 AV2 Audio Input: HDM Audio Output: Speaker (4Pin PH2.0 connector) Board Size: 91mm x 66mm x 12mm.
  • Compatible Work With 15.6" 1366x768 1CCFL Backlight 30Pin LCD Screen.
  • If the model of the screen is not compatible with the control board, the control board cannot operate normally. If you have any questions about the....
Check Stock

Terasic DE10-Lite

  • ANTI-INTERFERENCE & FASTER: This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed. The transmission baud rate is 9600..
  • PROGRAMMABLE IN LADDER LOGIC LANGUAGE: Program is written in ladder logic programming language, supports ladder logic programming language programming, downloading and monitoring, supports for GX-Developer, GX-work2..
  • SUPPORTS HMI CONNECTION: Supports HMI connection. Programming port is the port for program upload, download and HMI communication..
  • 16 POINT INPUT & 16 TRANSISTOR OUTPUT: The PLC board supports 16 point input and 16 transistor output. Y0-Y3 4 channels output 100k, 200MA, externally added with freewheeling diode up to 3A and Y4-Y17 for 24V, 3A..
  • WIDELY USED: Widely used for fields of printing, metallurgy, food, textile, packaging, home, building materials, plastics, chemicals. The industrial control board is powered by DC 24V. Do not input AC or 220V voltage..
Check Stock

Weewooday 6 Pieces Nano Board V3.0 ATmega328P Without Cable Compatible with Arduino Nano V3.0 with Pin Headers Pin Unsoldered

  • What you will get: the package included 6 pieces of nano board V3.0 ATmega328P, each nano V3.0 ATMEGA328P improved version with 3 pieces of pin headers unsoldered.
  • ATmega328P chips: using Atmega328P-AU MCU, support ISP download, using the same chips ATmega328P and CH340 with the official version.
  • Mini nano board: this is a portable, complete, and breadboard friendly board.
  • It has everything that compatible with Arduino has (electrically) with more analog input pins and onboard +5V AREF jumper.
  • Input and output: each of the 14 digital pins on the Nano can be applied as an input or output.
  • USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • The power source is automatically selected to the high voltage source.
Check Stock