Reviews Inner Hardened Pipe- BestItemr.com

PONY 50 Clamp Fixture for 3/4 Inch Black Pipe

features crank-type handle and 1-3/4-inch square clamp faces.
Hardened steel construction with baked enamel fish with no holes, rivets, or notches.

Bearing Blade: Bearing blade, high hardened and multi wear incisive blade, can cut iron pipe, incisive and durable, small cutting crack..
Multi Bearing Grip Wheel Design: Multi bearing grip wheel design, 6 bearings evenly distributed, good grip balance to ensure fluent cutting without running knife..
Unique Ball Bearing Structure Design: Unique ball bearing structure design, cutting more energy saving. Strong toughness, rust resistance, aging resistance and fall resistance..

Ideal for reaming on stainless steel and copper tubing.
45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
Hardened steel construction for maximum durability.
dual inch and metric measurement bar for ease of use.
Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Designed to turn taps-tools that cut threads on the inner surface of a hole or pipe or other small tools, such as hand reamers and screw extractors..
T-Ratchet can be set for Right or Left hand operation or locked to use the tool without it.
Wrench features a self-centering hardened steel jaws and knurled chuck sleeve provide positive grip.
The sliding T-handle fits into tight spaces while providing excellent leverage.
a). 1/16" to 5/32" (1.5 to 4.0 mm) b). 5/32" to 1/4" (4.0 to 6.0 mm) c) 1/4" to 1/2" ( 6.0 to 12.0 mm).

Heavy-duty cast aluminum housing is 40% lighter than cast iron. The I-beam handle's wide design provides better weight distribution..
Drop-forged jaw is heat-treated to resist distortion or breakage. Hardened teeth provide tremendous bite..
Easy-spin adjusting nut is heat-treated for durability..
Hammer head provides flat surface for hammering..

One easy revolution of the DEB4 Deburring Tool produces a 3/32-Inch 15-Degree chamfer in seconds.
Creates a smooth pipe end so solvent spreads evenly as pipe is joined.
Reversible, sharpenable, hardened steel blade for two cutting edges.
Deburrs six pipe sizes: 1 1/4-Inch - 4-Inch.

COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....

【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
Note: Mounting screws are not included here.

PLASTIC PIPE CUTTER – Resists rust, corrosion and streaking and comes in a beautiful chrome plated finish..
STEEL CUTTER BLADE – Saw tooth hardened steel cutter blade cuts plastic pipe from 1-1/4 in. in diameter..
ATTACHES TO POWER DRILL – Steel shaft attaches to power drill..
FLUSH CUT – Allows for a flush cut to the ground..
REQUIRES – Use on plastic pipe only. Requires a power drill for use..

Cuts up to 2-5/8-Inch copper and iron pipe.
Grooved rollers accept flared pipe ends to provide cuts directly below the flare. Solid frame for greater strength.
Cutting wheel is made from bearing tool steel for maximum durability. Includes fold-out deburrer with positive lock and two cutting edges.
Hardened Acme threads for greater cutting strength.