Reviews Inner Arm Shaft Kit

Flex Shaft 6mm Shank,Metal Flexible Shaft for Wood Carving Knife Chise Grinder Tool with Hex Wrench,100mm/3.93 Inch(Length)

  • FOREDOM FLEXSHAFT SET MOTOR MAINTENANCE KIT S-93 INNER SHAFT & S-77 OUTER SHEATH.
  • FOREDOM FLEX SHAFT MOTOR PARTS INNER SHAFT & OUTER SHEATH FOREDOM "Original" PARTS - SET OF REPLACEMENT PARTS These are original Foredom Flex Shaft replacement parts, used for the maintenance of your Flex Shaft Motor. Sale is for the set inner and outer replacement parts. The Outer Sheath measures 36-1/4" long, standard material outer sheath comes equipped on most of the standard models. FOREDOM Item Number: S-77 NOVELTOOLS # 0616-77 The Inner Shaft Cable the standard KEY TIP SHAFT, a 39" long inner shaft is used to replace broken or worn shafts. FOREDOM Part Number S-93 NOVELTOOLS # 0616-93 NOTE: Shaft should be greased when replacing part. Please see our store for 1oz Tube of Grease..
Check Stock

Sonata For Violin and Turntables, Part 1

  • Replacement Inner ring ONLY for 9.6"(24.5cm) microwave oven glass flat turntable plate.
  • Dimensions: Triple Arm Length 3.5inch/ 9cm,Roller Dia. 14mm, Shaft Length 12mm.
  • Quality: Made of high quality plastic for long life usage, an ideal replacement for the old or broken one..
  • 2 Pieces microwave turntable triple support..
  • Reminder: Please measure the diameter of the ring and the roller (Triple Arm Length 3.5"/ 9cm, Roller Dia. 14mm , Shaft Length 12mm)..
Check Stock

Southwest Speed New 55-56 Chevy Factory Replacement Clutch Pedal KIT TRI-5 1955 1956 150 210 BEL AIR Nomad Includes Pedal Cross Shaft Sleeve BUSHINGS SPACERS Return Spring Bracket Retainer

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Kit that includes a Clutch Pedal Cross Shaft Sleeve, Two Nylon Bushings, Cross Shaft Steel....
  • This Southwest Speed clutch pedal kit is a reproduction of the original clutch pedal parts used on all 1955-1956 Chevy Passenger Cars with manual....
  • Kit Includes: > Southwest Speed Clutch Pedal Cross Shaft Sleeve (SWS # 650-4658) > Southwest Speed Clutch Pedal Cross Shaft Sleeve Nylon Bushings (SWS....
  • Southwest Speed Clutch Pedal Return Spring Bracket (SWS # 650-4662) > Southwest Speed Clutch Pedal Splined Output Arm (SWS # 650-4664) > Southwest....
  • Applications: > 1955-1956 Chevy Bel Air > 1955-1956 Chevy 150 > 1955-1956 Chevy 210 > 1955-1956 Chevy Nomad > 1955-1956 Chevy Sedan Delivery.
Check Stock

Metra 95-7953 Double DIN Installation Kit for 2006-2010 Suzuki Grand Vitara Vehicles

  • Quick conversion from din to 2-shaft with snap-in style shaft supports.
  • Includes a din opening with adjustable depth feature.
  • Radio side support is provided by our patented side arm support system.
  • Install dash kit for Double DIN/ISO Radios.
  • Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.
Check Stock

All Balls Racing 28-1028 Swing Arm Bearing Seal Kit Compatible with/Replacement for Yamaha

  • Specs: Swing Arm Bearing Kit, Contains: 2 Needle Bearings, 1 Needle Bearing Shaft, 2 Seals, 2 Washers.
  • Complete kits that contain all of the bearing and seals (if required) trepair the swing arm.
  • Compatible With/Replacement For: Yamaha YFZ350 Banshee 1987 - 2009.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Swing Arm Bearing Kit built to meet OEM specifications.
Check Stock

TIKSCIENCE Universal Torque Arm Conversion Kit,Fit for Electric Bicycle E-Bike Front or Rear 2 Set

  • ➤[Fitment] : This universal torque arm conversion kit fit for electric bicycle e-bike.This product is suitable for normal motor shafts, except for special shafts (the size of the motor shaft does not exceed 14mm).
  • ➤[Excellent Function] : These versatile torque arms can be installed inside the frame/fork or outside.This torque arm will help prevent the motor from coming loose from the fork (front) or frame (rear) and also prevent the slotted axle from bending or breaking your dropouts..
  • ➤[Durable Material] : The universal torque arm conversion kit is made of high quality antioxidant iron and aluminum. The surface is anodized to completely resist oxidation and corrosion, and to maintain a long-lasting, beautiful luster under light conditions..
  • ➤[You Will Get] : 2 x Steel torque arm.
  • 2 x Stainless steel nut and 5mm Allen bolt.
  • 2 x Slotted electric motor C washer as pictured..
  • ➤[About Service] : The universal torque arm conversion kit designed and manufactured meets stringent delivery standards, with precision inspections before shipment to ensure quality problems.The customer service period is 2 year. If you have any questions about our product, please reply to us by email and we will help you resolve any issues as soon as possible....
Check Stock

Lidscura 8PCS Motorcycle Bearing Pullers 9-23mm Motorcycle Internal Bearing Removal Tool Kit Inner Bearing Extractor Kit

  • Widely Application: This Remover tool kit is ideal for internal bearing removal of automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc..
  • Meet Your Different Needs: Internal bearing Extractor tool set is equipped with 5 different sizes of open clips. The bearing can be disassembled from 0.35inch(9mm) to 0.91 inch(23mm) inside diameter..
  • Fine Workmanship: This motorcycle bearing pullers set is made of high-quality chrome vanadium steel, strong and durable for for a long service time..
  • Easy to Use: Connect this bearing puller kit with 1/2" 3/4" male thread water faucet, open clamps by turning handle clockwise to snug against the bearing for taking out the inner bearing..
  • Instructions for use: First the tool head into the inner ring of the bearing, and then screwed into the shaft, the tool head propped open hooked bearing inner ring, and then turn the shaft, you can pull out the bearing.
Check Stock

The ROP Shop | Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE

  • The ROP Shop replacement Steering Repair Kit with Sector Gear for John Deere GX21924, GX21924BLE.
  • Specs - Sector Gear Dimensions: 8 1/2" Diameter. 11/16" Inner Diameter. 5 5/8" Length. 5/16" Thickness. Pinion Gear Dimensions: 11 Teeth. 1" Height. 1 3/8" Outside Diameter. Shaft Bushings Dimensions: 1 1/8" Diameter without Tabs (1 5/16" with tabs). 5/8" Inner Diameter. 7/8" Height. Refer to image 2 for more information.
  • Includes - (1) Steering Sector Gear, (1) Steering Pinion Gear, (1) Bushing, (2) Screws, (1) Washer, (3) Lock Nuts & (2) Steering Shaft Bushings.
  • This kit is for/fits John Deere 102, 105, 107S, 115, 125, 135, 145, 155C, 190C, 92H, D100, D105, D110, D120, D125, D130, D140, D150, D160, D170, LA100, LA105, LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145, LA150, LA155, LA165, LA175, X110, X120, X125, X130R, X135R, X140, X145, X155R, X165 Lawn Tractors.
  • Please be sure to check your part or model number to ensure this is the correct steering repair kit for your unit. Also, please note this may replace multiple parts numbers.
Check Stock

SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS

  • ...r Steering Gear Box Kit with 20:1 Gear Ratio, and 1400 Series Performance Power Steering Pump that fits 1976-1986 Jeep CJ > This Southwest Speed Steering Gear Box Kit includes Southwest Speed Re-manufactured Heavy Duty Factory Replacement Power Steering Gear Box featuring a 20:1 Gear Ratio with 13/16"-36 Input Shaft, and 1 1/8"-32 Spline Output Shaft.
  • Kit Includes: | Southwest Speed Re-manufactured 1976-1986 Jeep CJ Replacement Heavy Duty Power Steering Gear Box (# 105-2974) > Engineered for superior durability > O-Ring Ports > O.E. Spool Valves > Heavy Duty Gears > 20:1 Gear Ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2.750" Standard Piston Diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting.
  • Southwest Speed Re-manufactured 1976-1986 Jeep CJ 1400 Series Performance Power Steering Pump (# 149-1622) > Fits Jeeps with 258/304/401 cu. in. engines, as well as 4.0 Liter, with the OE Can > Re-manufactured > Perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.
  • Southwest Speed 1976-1986 Jeep CJ 5 3/4" Power Steering Pump V-Belt Pulley (# 149-1594) > Pulley comes Pre-P....
Check Stock

OTC 4676 Windshield Wiper Puller

  • Safely removes wiper arms on a wide variety of foreign and domestic Cars, SUVs, Vans, and Light Trucks.
  • Engineered to ensure no damage will occur to wiper arm hood or cowling during wiper arm removal.
  • Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft to remove the wiper arm.
  • Tool features a throat depth of 1-1/16 inches.
  • foot spacing accomodates wiper shafts up to approximately 5/8 inch diameter.
  • Features a rugged metal frame and forcing screw with rounded tip to engage small depression on windshield washer shaft or loosened nut - keeping the screw centered on the shaft for optimum performance.
Check Stock

Metra 99-6507 Single DIN Installation Kit for Select 2004-2008 Chrysler/Dodge/Jeep Vehicles

  • Professional installer series Turbo Kit offers quick conversion from din to 2 shaft.
  • Designed to mount precisely to the oem radio mounting location.
  • Radio support is provided from our patented side arm support system.
  • Install dash kit for Single DIN/ISO Radios.
  • Includes a storage pocket below the radio.
Check Stock

HaroldDol AC Air Compressor With Clutch YCC257，Air conditioning compressor Replacement For 2011-2016 F250 F350 F450 F-550 6.7 6.7 Diesel

  • 【APPLICATION】B A/C Compressor Clutch Remover Installer Puller Tool Kit, is used to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors and fit for GM, fit for Ford, fit for Chrysler, imports, and others.
  • 【EASY TO USE】Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads.
  • 【HIGH-QUALITY】A/C Compressor Clutch Remover is made of stainless steel with a black coated finish, durable and long lasting.
  • Resists rust and corrosion under proper care and lubrication.
  • 【PACKAGE INCLUDED】This kit includes puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
  • 【CARRYING CASE】Comes with a carrying plastic carrying case for easy organization, storage, and transport.
Check Stock

Detroit Axle - 4x4 Front Upper Control Arm w/Ball Joints Tie Rods Replacement for Ford F-150 F-250 Expedition - 8pc Set

  • Front End Kits Compatible With 4WD Models Only.
  • This Kit Includes: 2 Pcs upper control arm with ball joint, 2 Pcs Lower Ball Joint, 2 Pcs Front Outer Tie Rod End And 2 Pcs Inner Tie Rod End.
  • Replacement For 4x4 Only - 1997 1998 1999 2000 2001 2002 Ford Expedition Front end rebuild kit. 1997-2003 Ford F150 Front end suspension kit,....
  • Designed With Premium Quality Materials For Exceptional Performance, Reliability And Peace Of Mind. With Suspension rod, inner tierod, ball joint....
  • 10 Year Warranty on all Detroit Axle Front End Suspension Kit, Upper Control Arms, Lower Ball Joint, Outer tie rod end and Inner Tie Rod End..
Check Stock