Reviews Inline Flow Meter

DAE AS200U-75P Water Meter with Pulse Output, 3/4″ NPT Couplings, Measuring in Gallons

  • Horizontal Inline mount with dial facing upwards. For installing vertically with water flowing upwards, please refer to DAE V-75P. Or DAE VM-75P which can be installed in any position, vertically, horizontally, water flowing downwards or upwards, dial facing upwards, downwards or side-way. Not for use of pit application. For outdoor use, please refer to DAE MJ-75c, PD-75..
  • Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go..
  • Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT – An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture)..
  • For product description, you can also refer to “Specification Sheet” in “Product guides and documents”. To install the D....
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

Shaded Pole Brake Motor, 115V AC 60 Hz, 50 RPM, UL CSA Listed, ELE-030

  • ...zles showcase industrial strength materials and experienced design. The internal mixing element is built using High-Strength Polyacetal known for its stiffness and stability under high pressure. The element is surrounded in a lightweight, yet durable casing made of high-quality Polypropylene..
  • PRECISION OUTLET - Our inline mixer features a Stepped outlet type that allows you to control the flow of adhesive. You can also attach an external spreading device for more control..
  • INDUSTRY STANDARD BELL MOUNT - Our epoxy mixer is fixed with a bell mount cartridge attachment for large volume dual adhesive cartridges. Fits all cartridges, including 200cc, 400cc, and 600cc. Compatible with a Meter Mix Dispenser..
  • PRODUCT STATISTICS - Inner Diameter: 0.394/10.00 (inch/mm). Outer Diameter: 0.549/13.94 (inch/mm). Length: 10.87/276.10 (inch/mm). Element Number: 24. Part Number: BT MC 10-24.
Check Stock

Separating Roller, Smooth Holder Unit for ZCM1000, 1100, 2000 and 2200 Electric Tape Dispensers, ZCM1000P

  • ...zles showcase industrial strength materials and experienced design. The internal mixing element is built using High-Strength Polyacetal known for its stiffness and stability under high pressure. The element is surrounded in a lightweight, yet durable casing made of high-quality Polypropylene..
  • PRECISION OUTLET - Our inline mixer features a Stepped outlet type that allows you to control the flow of adhesive. You can also attach an external spreading device for more control..
  • INDUSTRY STANDARD BELL MOUNT - Our epoxy mixer is fixed with a bell mount cartridge attachment for large volume dual adhesive cartridges. Fits all cartridges, including 200cc, 400cc, and 600cc. Compatible with a Meter Mix Dispenser..
  • PRODUCT STATISTICS - Inner Diameter: 0.366/9.29 (inch/mm). Outer Diameter: 0.500/12.70 (inch/mm). Length: 9.12/231.65 (inch/mm). Element Number: 24. Part Number: BT 160-824.
Check Stock

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)

  • Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
  • 1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
  • Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
  • Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
  • Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
Check Stock

Raindrip 117025B 1Gph in-Line Dripper, Black

  • Precise, even watering keeps soil moist to hydrate the plant’s root zone.
  • Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets.
  • Fits ¼ in. tubing and dripline with internal diameter of 0.170 in..
  • Non-pressure Compensating Emitter delivers water gradually.
  • expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source.
  • Inline emitters have integrated barbs on both sides to connect right into distribution tubing.
  • Water is delivered from one side of the emitter.
Check Stock

A-Team Performance - Two in One Electric Fuel Pump and Inline Filter Kit with Mounting Bracket

  • Two in One Electric Fuel Pump and Inline Filter Kit with Mounting Bracket.
  • Kit Features — High-flow pump, efficient filter, and an easy to mount bracket.
  • Electric Fuel Pump — Great fuel delivery solution for EFI power plant. Compatible with EFI gasoline applications, flows at 320 liters (85 gallons/hour).
  • Inline Fuel Filter — Designed for maximum flow, with almost no pressure drop, and can be used in fuel injected or carbureted engines with low or high horsepower.
  • CNC-Machined Bracket — Lightweight billet aluminum, designed for Bosch 044 Style Fuel Pump (JM1040) and Inline Fuel Filter (JM1021, JM1022, and JM1023).
Check Stock

VIVOSUN Air Filtration Kit: 6 Inch 440 CFM Inline Fan, 6'' Carbon Filter and 16 Feet of Ducting Combo

  • All-In-One Combo: This inline fan combo enables your ventilation system set up in a grow tent, which is ideal for cooling down heat from lighting fixtures and controlling hot and humid conditions.
  • Powerful Inline Fan: Made of galvanized steel, the 6-inch inline fan runs at a speed of 2450 RPM and produces an air flow of 440 CFM, with a noise level of just 50 dB the maximum.
  • Premium Carbon Filter: Interior and exterior mesh construction provides 53% open area for free air flow.
  • It is filled with 1050+ RC 48 Virgin Australian activated charcoal captures air contaminants effectively.
  • Multi-Layer Air Ducting: It comes with 3-layer construction--inner and outer layers are made of heavy-duty aluminum foil that is fire-retardant and its middle layer adopts PET thermoplastic.
  • 2 Rust-free Clamps: The kit includes a pair of clamps that are made of stainless steel, which are used for securing the connection between ducting and inline fan to keep the connected components in place.
Check Stock

Flow Meter,Aluminum Alloy 1/2 inch Digital LCD Display High Accuracy Fuel Diesel Flowmeter Water Flow Rate Sensor,Control and Measure Low Flow for Gasoline,Kerosene,Engine Oil Blue

  • ✔【DIGITAL LCD DISPLAY】The aluminum alloy flow meter has LCD screen display, which can provide clear reading. Meanwhile, the LCD display flow....
  • ✔【READING AND ACCURACY】There aluminum alloy fuel diesel flow meter has intuitive clear reading and high reliability on digital stainless steel....
  • ✔【WIDE COMPATIBILITY】The high accuracy fuel flow meter is suitable for high viscosity liquid media such as diesel, gasoline, kerosene, engine....
  • ✔【RELIABLE QUALITY】The blue LCD display high accuracy aluminum alloy fuel diesel flow meter is 100% brand new and high quality. Meanwhile, it is....
  • ✔【100% WARRANTY】We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We....
Check Stock

JE1D013N - ClimaTek Upgraded Furnace Exhaust Inducer Motor Fits Carrier

  • All-In-One Combo: This inline fan combo enables your ventilation system set up in a grow tent, which is ideal for cooling down heat from lighting....
  • Powerful Inline Fan: Made of galvanized steel, the 6-inch inline fan runs at a speed of 2550 RPM and produces an air flow of 390 CFM, with a noise....
  • Premium Carbon Filter: Interior and exterior mesh construction provides 53% open area for free air flow.
  • Multi-Layer Air Ducting: It comes with 3-layer construction--inner and outer layers are made of heavy-duty aluminum foil that is fire-retardant and....
  • 2 Rust-free Clamps: The kit includes a pair of clamps that are made of stainless steel, which are used for securing the connection between ducting and....
Check Stock