Reviews Injector Fittings

Innova 3640 Professional Fuel Injection Pressure Tester

  • Helps identify and diagnose low fuel pressure a faulty fuel pressure regulator leaking injector(s) fuel leaks and/or clogged fuel filters.
  • Properly rated fuel hose and brass fittings make this tool a step above the rest in quality and longevity.
  • Large easy-to-read 2" dial face with 0-100 PSI scale.
  • Durable 16" gauge hose and 6-foot bleed-off hose with solid brass fittings.
  • Includes Ford GM and Chrysler test adapters and a "Tee" adapter for import vehicles.
Check Stock

Raincovo Chemical Injector Kit, Soap Injector for Pressure Washer, 1/8 Inch 27 Male BSP Thread

  • Chemical injector kit fits most pump which is an OEM brand. Replaces pump 203640GS 308452002, 190593GS and 190635GS..
  • Soap injector makes cleaning so much easier and faster. It’s a great replacement for the old rusted one..
  • The brass fitting is a 1/8 inch 27 male BSP thread. Install them and the soap dispenser works just like new..
  • How to install: Take the brass fitting, drop in the little ball, insert spring with small end against the ball, then attach it back on the pump. Do not over-tighten otherwise it will snap off..
  • Kit includes 2 pieces fittings, 2 pieces small balls, 2 pieces springs, 2 pieces o-rings outside and 4 pieces inside..
Check Stock

AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Pump does not cycle on/off and provides quiet, smooth operation.
  • it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
  • Precision-machined billet-aluminum injector with integral check valve.
  • three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min).
  • tank-less 35 PSI Boost dependent gas water/methanol system.
Check Stock

AEM 25-104BK Black High Volume Fuel Rail

  • Applications: 90-93 Honda Accord DX, LX, SE, EX F22 and.
  • Applications: 92-01 Honda Prelude S, Si, Si VTEC F22, H23 and H22.
  • O.E. fuel pressure regulator or AEM adjustable fuel pressure regulator mounts directly to rail with no modifications.
  • Comprehensive installation instructions, hardware, fittings and injector O-rings included.
  • No additional parts required for installation.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • ...ng. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
  • CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel injection pump pressure easily and quickly. You can compare the pressure value to the manufacturer's recommended reference range, aid to diagnose gasoline engine fuel system. Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or fuel regulator, low tank pressure. High fuel pressure may caused by a defective fuel pressure regulator or kinked outlet return line..
  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR fuel injector tester set. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the kit fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help i....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

16Pcs Diesel Engine Compression Gauge Tester Cylinder Pressure Test Tool Kit with Case for Car & Truck

  • This compression testing set has fittings for replacing injectors and glow plugs..
  • 0-1000 PSI/0-70 bar gauge with release valve and flexible hose..
  • Comes with 9 different glow plugs and 4 injector adaptors..
  • Our diesel compression tester set includes all the necessary components to test diesel compression on most diesel fueled trucks, cars and tractors..
  • Comes with a durable plastic case for easy transportation and storage..
Check Stock

Bonbo 6.0 IPR Valve Socket with Seal Kit & 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool & Oil Rail Adapters for 6.0L Powerstroke Diesel Engine

  • ...tly fits for E-350, E-450 6.0L V8 Diesel Turbocharged | F-250, F-350, F-450, F-550 Super Duty 6.0L V8 Diesel Turbocharged | Excursion 6.0L V8 Diesel Turbocharged. All of these models are dated from 2003-2010..
  • 6.0 IPR Valve Socket – Used to quickly remove and replace the injector pressure regulator (IPR) on 6.0L and other diesel engines..
  • 6.0 IPR Valve Air Test Fitting Tool – Equipped with 1/4 inch pipe threads to accept standard air fittings. It takes place of the IPR valve and keep the system completely sealed, avoiding any possible leakage..
  • Fuel Rail Adapters – Essential for connecting to the oil rail to test for leaks. It allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks using shop air..
  • Premium Material – Features top high quality solid steel or brass constructed with a slick finish, durable and anti corrosion, repeatedly tested and gradually optimized to ensure its excellent performance and lasting service time..
Check Stock

Diesel Fuel Filter for VW Golf Jetta TDI HENGST Made in Germany

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

Fuel Injector Return Line Kit - Fittings + Hose for VW Audi TDI 2.0L Diesel

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

HiSport Fuel Injector Seal Kits Include O-rings, Pintle Caps, Seal Spacers and Filter Baskets Universal Repair Set Replaces 0280150962 [8 Set]

  • [COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962.Compatible with Ford V8 5.4L 4.6L Fuel Injector Service Repair Kit Seals Pintle Caps Filters..
  • [PACKAGE INCLUDES] This fuel injector repair kits include 8 micro filters 101, 16 injector O-ring 203, 8 injector retaining pintle caps 308, 8 injector spacers and 8 injector seal..
  • Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm).
  • [QUALITY CONTROL] This fuel injector repair installation kits set is 100% testing during the manufacturing process. o rings are made by FKM VITON material, it resistants high temperature which more than 200 degrees. All Items tested for reliability, durability..
  • [SATISFACTION] HiSport ensures brand new and high-quality products. In terms of any problem with this product, please contact us, our friendly assistants will always be available to help you within 24 hours..
Check Stock