Reviews Injection Plastic Machinery

Tie Down Engineering Dock Hardware - Angle Brackets/Clip

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock

Befenybay 8PCS Black Corner Bracket Cube (20x20x20mm) for 6mm Slot Aluminum Extrusion Profile 2020 Series (Cube Corner-8PCS)

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock

1M Drag Chain Cable Carrier R18 10x10mm(Inn HxW) Plastic Black Towline Wire Cable Chain Carrier for CNC Router Mill and 3D Printer,with Extra Connector,Screwdriver,Screws, Bridge Type(10x10）

  • 【Specification】Internal: 10 x 10mm/0.39 x 0.39inch(H*W).
  • External: 13.5 x 17.2mm/(0.53 x 0.68inch)；Total Length : 1M/39.4inch.
  • 【Extra】Extra one pair connector, can split the integral drag chain into 2 pieces to use.
  • Extra 8pcs screws, easy to fix the chain.
  • Extra Screwdriver, freely disassemble to change the length of the chain..
  • 【Multi-Applications】The black plastic drag chain cable carrier is suitable for the occasions of reciprocating motion, tow and protect the built-in electric cable, oil pipes, gas pipes, water pipes. It has been widely used for CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, Injection molding machine, manipulator, lifting and transportation equipment, Automated warehouses etc..
  • 【Flexible】Every segment can be removed and it could be combined with another length to make one long piece..
  • 【Performance】 Low noise, wear resistance, high-speed movement..
Check Stock

uxcell R28 15mm x 30mm Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • External Size: 20x38mm(0.787x1.496 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R18 10mm x 20mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC

  • Internal Size: 10x20mm(0.394x0.787 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

2Pcs Drag Towing Chain Flexible Drag Chain Cable for Numerical Control Electronic Equipment Stone Machinery

  • Premium Quality: The drag chain can be coordinated with the moving parts of the machine tool machinery and equipment, which can exert safety protection and guidance capabilities, extend the service life of the protected cables, oil pipes, and air pipes, and reduce consumption..
  • Widely Applications: Widely used in CNC machine tools, three‑dimensional printers, electronic equipment, stone machinery, door and window machinery, injection molding machines, manipulators, overweight transportation equipment, automated warehouses, processing centers, automated machinery and equipment, etc..
  • Advantages: Can improve cables and tubing. Professional manufacturing, stable performance and high reliability, which has passed strict quality control, you can use it with confidence..
  • Product Brief: The messy distribution of trachea, neatly and regularly arranged together, can increase the overall artistic modeling effect of machine tool machinery and equipment..
  • Item type: Drag Chain, Material: Nylon, Color: As picture shown, Inner diameter: Approx. 10x10mm/0.4x0.4in, Rotation radius: Approx. 28mm/1.1in, Weight: Approx. 426g..
Check Stock

uxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole

  • External Size: 20x23mm(0.787x0.906 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

RCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish

  • EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
  • APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stock

uxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
  • External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
  • External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

39.3 inch Carrier Drag Chain Cable Wire R18 10x20mm (Inn H x W) Plastic Black Open Type for CNC Router Mill and 3D Printer,Wire Carrier Cable with 1 Pair Connectors,1pc Screwdriver,12 Screws

  • 【Extra】 Extra one pair connector, can split the integral drag chain into 2 pieces to use.
  • Extra 12pcs screws, easy to fix the chain.
  • Extra Screwdriver, freely disassemble to change the length of the chain and open the side cover of it..
  • 【Multi-Applications】The black plastic drag chain cable carrier is suitable for the occasions of reciprocating motion, tow and protect the built-in electric cable, oil pipes, gas pipes, water pipes. It has been widely used for CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, Injection molding machine, manipulator, lifting and transportation equipment, Automated warehouses etc..
  • 【Flexible】 Each section of the drag chain can be opened for easy installation and maintenance. You can also freely assemble the length as you needed..
  • 【Performance】 Low noise, wear resistance, high-speed movement..
  • 【Specification】Internal: 10 x 20mm/0.39inch x 0.79inch(H*W).
  • External: 15 x 28mm/0.59inch x 1.1inch(H*W)；Total Length : 1Meter/39.4inch.
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW)；Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Heyiarbeit 10x11mm Plastic Cable Wire Carrier Drag Chain 1M R28 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 10mm x 11mm/0.39" X 0.43"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock