Reviews Injection Moulding Manufacturers

Glarks 370Pcs M2 M3 M4 M5 Female Thread Knurled Brass Threaded Insert Embedment Nut Assortment Kit for 3D Printing

  • ★ Product Type: High quality knurled thread inserts nuts assortment kit..
  • ★ Package Detail: In this set, it include 15 kinds of m2, m3, m4, m5 knurl thread inserts nuts total 370pcs which are well packed in a plastic box..
  • ★ Product Material: All the nuts are made of premium brass, which has high hardness, no deformation, durable and reliable for long time use..
  • ★ Easy to install: Since the insert has a conduction valve, there is no need to back-drill and counter-sink the hole..
  • ★ Product Feature: Widely used on the injection moulding for tightly fixing.
  • can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection..
Check Stock

ECOTRIC 7

  • 1997-2006 Jeep Wrangler TJ(will not fit sport sport utility models).
  • Made from a unique poly material that is resists cracking, chipping or fading. High quality injection moulding fender flares with smooth and precise edge cutting finish..
  • Give your truck an instant rugged off-road look/ aggressive.
  • Hardware and rubber gaskets are to make fitment hassle free.
  • Prevent stones, rocks and debris from contacting truck body.
  • Placement on Vehicle:Left, Right, Front, Rear, Lower.
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • ...ne, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button..
  • MECHANICAL STRUCTURE: Clamping unit of extrusion blower moulding machine is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchro....
Check Stock

Hilitchi 250-Pcs M2 / M3 /M4 Female Thread Brass Knurled Threaded Insert Embedment Nuts Assortment Kit

  • ♛ High Quality Knurl Thread Inserts Nuts Assortment Kit.
  • ♛ Package Quantity: 250pcs - Packed in A Rugged Convenient Re-sealable Plastic Storage Case.
  • ♛ Made of Bass Material, Featured With Heat Resistance.
  • ♛ These Knurl Thread Insert Nut Can Be Widely Used On the Injection Moulding for Tightly Fixing.
Check Stock

Ndeko na ngai okeba

  • 【Full Size Keyboard, Plug and Play with It】104 Keys Full Size Keyboard. Featuring standard keyboard layout with F-keys ( function keys ) and....
  • 【Practical & Ergonomic Design】The K1 keyboard is ergonomically designed with a scientific layout of high and low keycaps to fit your hands....
  • 【Rainbow LED Backlight】The keyboard has a colorful LED backlight. The double-shot injection moulding process ensures that the letters never fade....
  • 【Finer-resolution Mouse】6 adjustable DPI (600/800/1200/1600/2400/3200). High speed transmission technology makes it move faster and more accurate.....
  • 【Reliable Performance & Wide Compability】Waterproof USB 2.0 cable, gold-plated interface and anti-interference magnet ring can ensure stable data....
Check Stock

MEIYYJ 500Pcs M2 M2.5 M3 Metric Female Thread Knurled Brass Threaded Insert Embedded Nuts Assortment Kit,Double Pass Knurl Nuts Copper Embedded Fastener for Furniture Electrical and More Projects

  • Type of Product: Brass Threaded Insert Embedded Nuts Assortment Kit..
  • Product Material: Made of premium brass, which has high hardness, no deformation, durable and reliable for long time use..
  • Package Detail: In this set, it include 10 kinds of m2, m2.5, m3 knurl thread inserts nuts total 500pcs which are well packed in a plastic box..
  • Easy To Use：These Brass Threaded Insert Embedded Nuts can be installed by heat into thread tapered hole or molded in during injection, the insert has a guide so there is no need for a counter bore or countersink. easy to install..
  • Product Feature:These Knurl Thread Insert Nut can be widely used on the injection moulding for tightly fixing..
Check Stock

Keadic 120 Pcs M4x8mmx6mm Thread Brass Knurled Nuts Set, Female Threaded Insert Embedment Nuts, Threaded Knurled Heat Set for Printing 3D Printer and More Projects

  • ...as high-precision and deep thread that is compatible with the corresponding screw, avoiding to slip. Smooth surface without any burr, standard circular, firm and uniform, easy to install..
  • 【Easy to Use】These threaded insert nuts can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Since the insert has a guide, there is no need for a counterbore or countersink..
  • 【Practical Fastener& Wide Application】Perfect for the injection moulding for tightly fixing, heat into thread tapered hole and ultrasonic installation.
  • Widely applied in laptop plastic housings, 3D printers, automotive,electrical injection molding, and all kinds of plastic casings..
Check Stock

Ouya 3PCS 3\ Hook and Loop Backing Pads 5/16\-24 Threads Polishing Buffing Plate for Dual Action Car Polisher

  • Shaped by injection moulding, with high elasticity and durability.
  • Suit for high speed polishing, and with good temperature resistance.
  • Especially designed for surface polishing, such as car, glass, ship, floor, etc.
  • We usually use it with wool pad, foam pad to improve the gloss finish.
  • High quality hook & loop which can be used for more than 10000 times.Thread: 5/8".
Check Stock

G-PLUS Fender Flares Fit 04-15 Nissan Titant without Bedside Lockbox, Pocket Style Black Wheel Flares Pickup Truck Accessories Trim Re-Paintable Guards 4Pcs (Smooth)

  • 【Check Compatibility First】：Smooth Matter Fender flares Pocket Style for 2004-2015 Nissan Titan WITHOUT BED LOCKBOX, Please Carefulliy check your vehicle, mode, year to make sure well matched..
  • 【Aggressive Off-Road Style】：Rugged appearance and custom-designed fender flares with stainless steel rivets will compliment your vehicle's look. Wide body makes Pickup full of off-road style.The tire coverage is 2" in front and rear，providing additional coverage for larger tires..
  • 【Hardcore Quality】：G-PLUS Ensures fender flares with features of durability and flexibility through Injection Molding process. Fender flares with high quality injection moulding have precise edge cutting finish..
  • 【UV PROTECTION】：Anti UV ingredients enhance the strength of fender flare can strongly resist cracking, warping and chalking..
  • 【Easy Installation】：No cutting or trimming needed，some drilling may be required.Includes two (2) front and two (2) rear fender flares,hardware for installation etc..
Check Stock

Signal Generator Test Line, Dual-Channel Arbitrary Waveform Function Generator BNC Coaxial Cable for Teaching and Scientific Research

  • Excellent workmanship, it is a very practical function signal generator accessories..
  • High quality BNC connector, stable performance, good contact, good transmission performance..
  • Special red and black branching line, good softness, easy to bend, not easy to break..
  • The product is integral injection moulding, with excellent quality, wear resistance, corrosion resistance and long service life..
  • The 50Ω coaxial cable with diameter of 4 mm can be used in most function signal generators..
Check Stock

Hilitchi 300Pcs Brass Knurled Nuts Threaded Heat Embedment Nut for Printing 3D Printer and More Projects (Assortment Kit)

  • ✅【STRANDARD AND COMPLETE THREAD】Deep thread, neat and clean, not easy to strip during rotation, stable and reliable. No need to counterbore or countersink the boss hole because the insert has guide pilot..
  • ✅【A MUST HAVE】These heat set inserts can be widely used on the injection moulding for tightly fixing. Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Also apply to circuit board assembly and in the field of electronics. The plastic is formed around the brass insert. It would be better to put something in the threads to keep plastic from melting into the center. Using a normal soldering iron, you could easily set them into 3D printed holes..
  • ✅【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!.
Check Stock

YFYIQI Solids Densimeter Rubber Density Meter Gravity Balance Gravimeter with Max Weighing 300g Precision 0.005g Accuracy 0.001g/cm3 for Plastic Rubber

  • ❤Plastic particle,film,floating,seal ring,rubber,calcium carbonate powder can get quick tested..
  • ❤Rubber DIN volume wear loss,Akron wear loss,expansion can be reading directly..
  • ❤Function of solution compensation.necessary if liquid other than water is used as a medium for measurement..
  • ❤Adopt the completed high-capacity measurement accessories with the transparent injection moulding sink,which can resist wear,fall off,and corrosion..
  • ❤Measuring Range: 0.001—99.999g/cm3； ❤Density Resolution: 0.001 g/cm3.
Check Stock

Lev-Tec Tile Leveling System 1/16 Kit (250 Wedges, 500 1/16 Clips, and 1 Pliers)

  • 【2000 Tile Clips】Package included: 2000 Leveling Spacer Clips (Not included wedges and plier). 1/12"(2mm) Grouting joint. Suitable for 1/8" to 1/2" thickness of the tile.
  • 【Professional Tile Leveling System】Can be used for both wall and floor tile. Ensures that tiles remain level and eliminates lippage. Fast & easy to install & remove.
  • 【High-Quality Platic】We use more crispy high-quality raw PE injection moulding tile spacers 1/12 inch (one-time), the cut is obvious, thinner and easier to kick off. Avoid the trouble of cleaning caused by incomplete disassembly (warm reminder: Do not push so hard during use tile.
  • 【Convenient & Efficient】Great tools for floor/wall setting. The system ensures flatness between tiles avoiding movements during the mortar setting.
  • 【Quality Assurance】Our aim is to design, produce and sell the products you want.
Check Stock