Reviews Injection Fitting Mould

APEC Water Systems SET 3 Pcs 3.5\ O.D. Replacement O-Ring For Reverse Osmosis Water Filter Housings, 3 Count (Pack of 1), Black

  • Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
  • Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
  • INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
  • SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
  • Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.
Check Stock

Rhino-Rack 572 Roof Mount

  • Inside length of the Ski Carrier is 250mm / 9.84 inches, Key locking for security, UV Protected.
  • Easy release and lock mechanisms for gloved hands, Rubber grip profile to protect your skis, Waterproof.
  • Universal fitting clamp to all Rhino-Rack crossbars types, Stealthier black look.
  • Universal fitting clamps to most non-Rhino-Rack crossbrs, Stronger arm locking, Mould Resistant.
  • Fits 2 pairs of skis, MasterKey compatible, Rust Proof.
Check Stock

0.38 Pens Fine Point Smooth Writing Pens Ultra Fine Retractable Pens,Black Permanent Ink,0.38mm Tip Ultra Fine Gel pen

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel....
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel....
  • Ink – High-Quality Black Permanent Inks From "Mikuni "are Waterproof and Sun-proof, and can be archived permanently..
  • Tip - 0.38mm Ultra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten....
Check Stock

2xhome Set of 2 Clear Louis Ghost Dining Armchairs Polycarbonate Designer Acrylic Transparent Crystal Chair with Arms Glass Modern Mid Century Victorian See Through for Desk Kitchen

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
  • Made from one single mould from crystal clear polycarbonate (stronger than acrylic).
  • Stackable, Scratch Resistant, and UV Protected.
  • Suitable for commercial and residential indoor & outdoor use.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

  • Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
  • Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
  • Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check Stock

XIZE SH Black Ink Pens Waterproof No Smudge Pen for Writing Cool Pens,Fine Tip 0.5mm,12-Count 3345

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel Material is Softer and Feels Better.After a Long Period of Storage and Use, It Can Always Refuse Hollowing and Slipping..
  • Ink – Dynamic Gel Ink Formula that's Mikuni(R) High Quality Ink for Quick-Drying and Colorfast Writing..
  • Tip - 0.5mm Extra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten Carbide Pen Ball, Wear-Resistant, Corrosion-Resistant, and More Suitable for Long-Term Writing..
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel Itself,Thereby Improving the Actual Sense of Use..
  • Pack - Includes 5 black gel ink pens. Box Size:5.82*2.28*0.75 Inch(148*58*19mm).
Check Stock

BeswinVR Halo Strap for Oculus Quest 2 and Original Quest- Virtual Reality Accessories- White Color

  • 【Latest Adapter】Design for Quest 2, Quick install without D.I.Y spacer. The new adapter tighten fit with Quest 2 well..
  • 【Latest Version】2020 ergonomic Designed head strap for Oculus Quest, No squeeze on face and nose, 50: 50 Balance weight between Oculus quest....
  • 【Comfort and Convenience】Easy-to-use size adjustment dial and hard-sided construction, 99% comfortable like HTC Vive Audio strap..
  • 【Packing List】1x Halo Strap, 2x PU leather pad, 1x head top belt..
  • 【Duability】100% injection mould made, No any 3D print, duable and long-life use at home, VR arcade and VR parks..
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

FAERSI Fuel Injection Pressure Test Kit - Universal Fuel Oil Engine Diagnostic Gauge Tester Set with Fittings, Instructions, Storage Case for Car Motorcycle Truck RV SUV & ATV, 0-100 PSI / 0-7 Bar

  • 【Special Design】: Complete Universal Fuel Injection Pressure Tester Kit is designed to easily detect the fuel pump pressure on injector systems, and check if fuel pump is defective or inconsistent in pressure flow.【Note】Our all products have a 18-Month WARRANTY, if you received wrong tester kit or it doesn't work, please feel free to contact us and we will give you a REPLACeMENT or REFUND..
  • 【Universally Compatible】: Suitable for any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Ideal for petrol engines of American Motors, Boschs AFC, MPC European & Japanese (except CIS), Chryslers Corp., Fords Motor Co., GMs (except TBI), Japanese fuel injection systems and so on..
  • 【Easy to use and Safety】: The pressure release valve fitting with long drain hose helps to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel, easy to use 【NOTE】The Gauge kit don't include a push pressure release button..
  • 【Easy to storage】: The Fuel Injection Pressure Tester Set with a ABS plastic blow-molded case can keep the tools organized, safe storage and easy to transport..
  • 【Package Include】The Fuel Pressure Test Kit has all necessary fittings....
Check Stock

Orbiter Extruder V1.5 Dual Drive Direct with Motor Compatible with Ender 3 V2 Pro Ender5 Plus CR10 BLV Voron V2.4 Prusa MK3S Also Suit DDE-O TPU Printing

  • Plastic is using glass fiber reinforced nylon injection modling, Sturdy shell and mould manufacturing..
  • PLEASE NOTE: The motor may come with LDO or Moons Big factory, both motors have very high quality, not effects on the use of extruder, please know....
Check Stock