Reviews Inflatable Rubber Core Mold

Inflatable Air Valve Replacement Screw Air Valve for Inflatable Rubber Dinghy Raft Pool Boat Fishing Boats 2pcs

  • High Quality: This Inflatable Air Valve is made of quality high dense ABS plastic, sturdy, anti and durable..
  • Size: Diameter of Thread Part: Approx. 20 mm / 0.78 inch. Length of Thread Part: Approx. 16 mm / 0.62 inch..
  • Cap Design: The fine design with a valve cap ensures antileak inflation. The bottom of the air plug has a rubber mat which can prevent leaks more effectively, give you safer protection..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good performance and long serve life..
  • Wide Application: This Inflatable Air Valve fits most inflatable boat, raft, rubber dinghy, etc. Package Included: 2 * Air Valves. Comes in pair, good replacement accessory for your inflatable boat..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good perf....
Check Stock

Warner Pry Bar for Molding & Trim Removal Painter s Series 10350A

  • Polypropylene core with soft rubber over mold handle is molded to the hardened high carbon steel blade.
  • Comfortable, lightweight, solvent resistant handle to reduce hand fatigue.
  • Blade isn't painted, so no coating to scuff wall surface.
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

Pressure Gauge 30PSI Air Pressure Gauge Measurement Durable Inflatable Boat Barometer PVC Barometer for Outdoor Sports Rowing,Kayaking Surfing Rowing

  • Made of high quality PVC material, sturdy and durable, suitable for inflatable boat, rubber boat, support plate, etc..
  • Check air pressure drop changes at any time to identify potential problems in the rubber boat, easy to install and operate..
  • Suitable for sports: outdoor projects, rafting, water skiing, surfing..
Check Stock

VICI Battery 12V 5AH SLA Battery Replacement for Razor PowerRider 360 Electric Tricycle Brand Product

  • 200x50 inner tube fits for Razor Crazy Cart, E100, E150, E200, Dune Buggy, Power Core E100, Crazy Cart, ePunk, eSpark, PowerRider 360 and other scooters and ride-ons using inflatable 200mmx50mm size tire.
  • Size 200x50 means that the tube with 200mm/8" outer diameter and 50mm/2" width. This 200x50 (8” x 2”) inner tube doesn’t fit for 8.5” x 2” Xiaomi M365 scooter tire.
  • Made of isobutylene isoprene rubber, NOT recap, which is better in air tightness, elastic damping and aging resistance than natural rubber.
  • CUSTOMER SATISFACTION: Before installing, check to see if the inner tubes are completely sealed by putting them in water, if there are any bubbles, they are already damaged. Please contact us, We will provide 100% refund or Free replacement to you soon.
Check Stock

BioMoi Silicone Vaginal Dilator with BioCote Protection - Supports Women's Health and Wellness - Trainer Provides Protection and Relief - (Small Set)

  • ... VOLUME】no scale necessary, this silicone mold making kit comes with 2 bottles, 2.86 lb kit, part A 1.43 lb, part B 1.43 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LOW VISCOSITY FOR EASY MIXING & POURING】this BBDINO 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with BBDINo Silicone Rubber Mold Making 30A has great flexibility & Strength. very easy to demold, this silicone mold making kit is Great for making simple one- or two-piece block molds, no vacuum degassing is necessary.
  • 【POT LIFE: 30-40 MINUTES, CURE TIME: 3-4 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】BBDINO silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【LONG SHELF LIFE & VIVID COLOR】Our BBDINO silicone mold making ....
Check Stock

Billabong Men's All Day Logo Sandal Flip Flop, Rasta, 10 Regular US

  • Boys sandals., Dual plug reinforcement., Anatomically correct footbed, a mold designed for comfort., Hexagon textured insole to increase traction., Wave logo molded outsole., Includes arch cookie and tapered heel wedge..
  • Combining comfort, durability and core design, the All Day Sandals for boys are made for all walks of life. An elevated rubber sandal, the All Day features a reinforced toe plug and anatomically correct footbed..
Check Stock

Gel Seat Cushion for Long Sitting ,Back, Sciatica, Hip,Wheelchair Pressure Relief,Tailbone Pain Relief Cushion, Gel Seat Cushion for Office Chair, Cars, Long Trips ，Breathable Honeycomb Chair Cushion

  • Inflatable donut cushion: when fully inflated, the outer diameter of the donut cushion is 38 cm/ 15 inches, the inner diameter is 10 cm/ 4 inches, and the height is 9 cm/ 3.54 inches.
  • When sitting on the inflatable cushion, the weight will be dispersed without causing stress to the body.
  • Portable and convenient: this inflatable ring cushion is easy to inflate and deflate.
  • When not in use, just squeeze the opened valve to deflate, and then fold it to store in a bag to keep it clean and avoid damage.
  • This cushion is lightweight and easy to carry around.
  • Suitable for: whether on a dining chair, sofa, office chair, car, train or airplane seat, you can use this inflatable donut cushion to bring you a comfortable and nice experience.
  • You can also use it in a wheelchair and when sitting up in bed.
  • Can be adjusted: since the round cushion pillow is inflatable, you can choose the softness or firmness you want.
  • In order to make the cushion firmer, please use a pump to add more air to it, and if you need less pressure, please deflate the cushion.
  • This inflatable cushion will mold to the shape of your bottom, and is non-slip, which can be safely applied with most chairs.
  • What you will receive: there are 2 inflatable donut cushions with different colors in the packag....
Check Stock

BUZIFU 2Pcs Air Valve 16mm Boston Inflatable Valve Replacement Universal Spiral Boat Air Valve, One-way Inflation Replacement Boston Screw Valve for Inflatable Rubber Dinghy Kayak Boat Airbeds

  • ... 16.5mm / 0.64 inches. The dinghy valve is a one-way inflation valve, good for quick inflation and deflation, saving you time. Please carefully confirm the size of the air nozzle required for your kayak before purchasing, the diameter of the air nozzle is 16.5mm.
  • ★【Durable & Anti-Seawater Corrosion】: Air valve inflatable boat spiral is made of high-quality rubber material. Airbed replacement valve is durable and has the characteristics of anti-seawater corrosion, anti-leakage and long service life..
  • ★【Leakproof Design】: The inflatable air valve replacement screw is designed to be closed. There is a rubber pad at the bottom of the air plug. After inflation, the rubber pad at the bottom of the 16.5mm screw air valve will automatically fit the edge of the air plug, which can prevent leakage more effectively and provide you with Safer protection..
  • ★【Easy to Install & Disassemble】: Boston air valve adopts spiral design, easy to install and disassemble, you just need to rotate to the right to remove the old Boston Valve, then rotate the new Boston Valve to the left..
  • ★【Suitable for Most Inflatable Boat】: The airbed valve cap replacement accessory is ideal for most inflatable boat, kayak, airbed, canoe, pool raft, rubber dinghy, canoe, e....
Check Stock

Air Pressure Gauge Barometer with Hand Pump Inflatable Boat Rafting Kayak Barometer Gauge Measurement

  • ?EASY TO INSTALL AND OPERATE?Check air pressure drop changes at any time to identify potential problems in the rubber boat, easy to install and operate. It can used with high pressure hand pumps, air pumps or air valves..
  • ?ACCURATE MEASUREMENTS EASY READ?The is marked with PSI and BAR units and is reliable to use. Accurate measurements and clear hands make it easy to read pressure data..
  • ?SAFE AND CORRECT PRESSURE? This air pressure gauge barometer is designed to help ensure that inflatable kayaks, boats, surfboard, beds with safe and correct pressure..
  • ?MEASUREMENT RANGE?The measurement range is 0-2 BAR or 0-30 PSI, meets most of the air pressure measurement of inflatable boats. Made of high quality PVC material, sturdy and durable..
  • ?WIDE APPLICATIONS?This inflatable boat pressure gauge is widely used for sports, outdoor projects, rafting, water skiing, surfing. Suitable for inflatable boat, rubber boat, support plate, etc..
Check Stock

WMYCONGCONG 3 PCS 6 Dually Valve Stem Extenders Straight Metal Dual Wheel Valve Stem Extensions for RV Tires Truck Motorhome Coaches Pickup Ram 3500 F350 Trailer

  • Dually stem extender is made of high quality nickel-plated solid brass, which complements the polished or chrome-plated wheels and provides years of....
  • Fast and frustration free installation by hand or with a 3/8 inch deep wall socket..
  • Application: Compatible with dual wheel vehicles, ideal for RVs, motorhome, coaches, bus, truck, trailers and pickups Ram 3500 and F350..
  • Equipped with rubber seals, to ensure that the inflatable airtightness. NOTE: Not suitable for rubber stem..
  • Package Content: 2 * 162mm Extension Rod with 3/8" (10mm) hex screw on the top + 1 * Blue Valve Core Remover, ideal for fast and safe tire pressure....
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber,Platinum Liquid Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resin Molds Silicone Molds DIY N.W 2.2 lb(Persimmon)

  • 【POT LIFE: 40~50 MINUTES, CURE TIME:4-5 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【SHORE A 15 & LOW VISCOSITY FOR EASY MIXING & POURING】this 15 Slow mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material to make a mold, no need degassing, the mold finished with Sipolysun Silicone Rubber has great flexibility and easy to demold, this silicone for mold making kit is the most suitable hardness for making DIY arts molds between 1cm to 20 cm..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LONG SHELF LIFE & VIVID COLOR】Ou....
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber 30A, Platinum Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resins Molds & Silicone Molds N.W 2.2 lb (Sapphire Blue)

  • 【POT LIFE: 50 MINUTES, CURE TIME: 6 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【LONG SHELF LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone Mold Making 30A designed with a stunning Sapphire Blue Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
Check Stock