Reviews Industry Standard Adapter

CURT 45405 Trailer Hitch Receiver Adapter Reducer Sleeve, 2-1/2 to 2-Inch

  • VERSATILE ADAPTER. This trailer hitch adapter sleeve easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
  • STANDARD FIT. This trailer hitch receiver adapter measures 2-1/2-inch x 2-1/2-inch to fit any industry-standard 2-1/2-inch trailer hitch receiver. It also accepts any industry-standard 2-inch x 2-inch shank.
  • SOLID STRENGTH. This hitch receiver reducer adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
  • CORROSION-RESISTANT. This trailer hitch reducer sleeve is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch reducer sleeve is fast and easy. You can use it as needed by simply inserting it into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

CURT 45048 Trailer Hitch Receiver Adapter Reducer, 2-1/2 to 2-Inch, 34-In Extension, 4,500 lbs , Black

  • VERSATILE ADAPTER. This trailer hitch adapter easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
  • ADDED CLEARANCE. This hitch receiver adapter also functions as a trailer hitch extension, adding 34 inches of extra length to your hitch receiver. It can also be trimmed to as little as 24 inches.
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch trailer hitch receiver. It accepts an industry-standard 2-inch shank. It is equipped with built-in safety chain loops.
  • SOLID STRENGTH. This hitch receiver adapter is rated for 4,500 lbs. GTW and 450 lbs. TW (6,000 / 600 lbs. at 24 inches). It can also be used with a weight distribution hitch for 6,000 lbs. WD and 600 lbs. WDTW (8,000 / 800 lbs. at 24 inches).
  • CORROSION-RESISTANT. This trailer hitch reducer is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
Check Stock

CURT 45408 Trailer Hitch Receiver Adapter Reducer Sleeve Set, 3 to 2-1/2 or 2-Inch, 2-Piece

  • VERSATILE ADAPTER. This trailer hitch adapter sleeve set easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 3-inch receiver and accepts a 2-1/2-inch shank.
  • STANDARD FIT. This trailer hitch receiver adapter set measures 3-inch x 3-inch to fit any industry-standard 3-inch trailer hitch receiver. It also accepts any industry-standard 2-1/2-inch or 2-inch shank.
  • SOLID STRENGTH. This hitch receiver reducer adapter set is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
  • CORROSION-RESISTANT. This trailer hitch reducer sleeve set is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch reducer sleeve set is fast and easy. You can use each of the included reducer sleeves as needed by simply inserting them into your hitch receiver (hitch pin sold separately).
Check Stock

Megadream Xbox One Wireless Chatpad Keyboard with 3.5mm Audio Jack for Xbox One/One S/One X, Xbox Series S/X, Xbox One Elite/Elite 2, PC – 2.4G USB Receiver & Charge Cable included

  • VERSATILE ADAPTER. This trailer hitch adapter easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-inch receiver and accepts a 1-1/4-inch shank.
  • ADDED CLEARANCE. This hitch receiver adapter also functions as a trailer hitch extension, adding 4 inches of extra length to your hitch receiver. This provides additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver. It also accepts any industry-standard 1-1/4-inch x 1-1/4-inch shank.
  • SOLID STRENGTH. This hitch receiver adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This trailer hitch reducer is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
Check Stock

iBOLT 25mm / 1 inch Ball Composite Universal Marine Electronic Fish Finder Mounting Plate for Industry Standard Dual Ball Socket mounting arms

  • This iBOLT 25mm / 1-inch / B size Universal Marine Electronic Fish Finder Mounting Plate is made out of sturdy composite material with a rubber coated ball joint and is compatible with all industry standard 1 inch / 25 mm mounting arms. Ball joints are coated in a rubber material..
  • COMPATIBILITY: Commonly used with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms. Use with Bizmount series mounts or any other 1-inch / 25mm / B size industry standard compatible mount..
  • FEATURES: a 30x38 mm industry standard 4 hole pattern (=AMPS) that will work with all industry standard AMPS adapter plates and hole patterns that are compatible with GARMIN GPSmap 7x12, 7x10, 12x2, 7x08, 9x2, STRIKER 9, Echo Map Plus 6”-7”, 9” and LOWRANCE HDS 9, 12 fish finder/ marine electronic equipment..
  • INCLUDES: 25mm / 1-inch Composite Universal Marine Electronic Fish Finder Mounting Plate.
  • COMPATIBLE DEVICES: GARMIN GPSmap 7x12, 7x10, 12x2, 7x08, 9x2, STRIKER 9, Echo Map Plus 6”-7”, 9” and LOWRANCE HDS 9, 12 fish finder/ marine electronic equipment..
Check Stock

Intel Corp X540T2 Converged Network Adapt T2

  • Standard CAT-6a cabling with RJ45 connectors.
  • Backward compatibility with existing 1000Base-T networks simplifies the transition to 10GbE.
  • Flexible I/O virtualization for port partitioning and quality of service (Qu's) of up to 64 virtual ports.
  • Unified Networking Delivering Lan Ischia And Foe In One Low Cost Can.
  • Industry First Dual-Port 10Gbase-T Adapter With Single-Chip Solution With Integrated Mac + Phi.
  • Reliable and proven 10 Gigabit Ethernet technology from Intel corporation.
  • Low cost, low power, 10 Gigabit Ethernet (10GbE) performance for the entire data center.
  • Flexible I/O virtualization for port partitioning and quality of service (QoS) of up to 64 virtual ports.
  • Unified Networking Delivering Lan, Iscsi, And Fcoe In One Low Cost Cna.
  • Industry First Dual-Port 10Gbase-T Adapter With Single-Chip Solution With Integrated Mac + Phy.
Check Stock

CURT 45797 Trailer Hitch Adapter 2-Inch Receiver 2-in Drop or Rise 7,500 lbs

  • VERSATILE ADAPTER. This receiver hitch adapter easily inserts into your trailer hitch whenever needed to drop or raise the connection point by 2....
  • DINGHY TOWING. This drop hitch adapter is perfect for flat towing a car, SUV, Jeep or truck, allowing you to level your tow bar and vehicle base....
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch receiver. It also accepts any....
  • SOLID STRENGTH. This raised hitch adapter is constructed from high-strength steel to ensure reliable towing. It is rated for 7,500 pounds.
  • CORROSION-RESISTANT. CURT drop receiver adapter hitched are finished in a highly durable black powder coat to withstand rain, dirt, UV damage and....
Check Stock

CURT 45798 Trailer Hitch Adapter 2-Inch Receiver 4-in Drop or Rise 7,500 lbs black

  • VERSATILE ADAPTER. This receiver hitch adapter easily inserts into your trailer hitch whenever needed to drop or raise the connection point by 4....
  • DINGHY TOWING. This drop hitch adapter is perfect for flat towing a car, SUV, Jeep or truck, allowing you to level your tow bar and vehicle base....
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch receiver. It also accepts any....
  • SOLID STRENGTH. This raised hitch adapter is constructed from high-strength steel to ensure reliable towing. It is rated for 7,500 pounds.
  • CORROSION-RESISTANT. CURT drop receiver adapter hitched are finished in a highly durable black powder coat to withstand rain, dirt, UV damage and....
Check Stock

iBOLT TabDock Accessibility Post / Pole / Rail / Handlebar Mount for Wheelchairs / Exercise Equipment, etc. Fits 7-10 inch Tablets (iPad, Samsung Galaxy Tab)

  • WORKS WITH ALL INDUSTRY STANDARD 1-INCH MOUNTS: Features 1-inch / 25mm / B Size Ball joints that are compatible with all industry standard 1 inch / 25 mm / B size adapters and arms. Our industry standard mounting patterns make it easy to add on/ upgrade/ or replace a currently installed mounting solution. The mount fits on handlebars measuring up to 30mm or 1.2 inches in diameter and is easy to install with the included hex key..
  • COMPATIBILITY: fits all Tablets 7-10 inch tablets in screen size. ( iPad , Nexus , Sony Xperia , Kindle , Samsung Galaxy Tab ). The Tablet holder opens from 4 to 8 inch and will hold device and case combinations up to 8 inches wide. The mount fits on handlebars measuring up to 30mm or 1.2 inches in diameter and is easy to install with the included hex key..
  • ADJUSTABILITY: Features a dual ball adjustable mounting system which makes this mount rotate in any direction for optimal viewing positions. Holder can rotate 360 for vertical or horizontal viewing. Use the two latches on the back to adjust the holders height to your devices size..
  • SPECS: The mount is 19 inches tall with multiple adjustable arms. Pole / Post / Handlebar mount fits bars up to 30mm in diameter and includes 3 spacer rings for the right fit. This mount is g....
Check Stock

Kegco KMKCAL Keg Coupler Adapter, Liquid

  • This Kegco keg coupler adapter makes it easier than ever to dispense both store bought beer and your own home brew using the same dispense system.
  • Adapter fits onto the liquid-out side of all industry standard keg couplers and allows you to connect a liquid ball lock coupler to the post.
  • No more messing with tubing connections on a standard Sanke conversion kit or continuously tapping and untapping the Sanke keg.
  • Now you can seamlessly switch between your ball lock corny keg and a comercial Sanke keg in seconds!.
  • These Sankey to ball lock disconnects are the best solution for dispensing several beers that you have on tap at once.
Check Stock

9pcs 3/8' Drive Inch Torque Adapter Set

  • Torque adapter set can be used with torque wrench to finish simple torque calibration..
  • SIZE RANGE :3/8",7/16",1/2",9/16",5/8",11/16",3/4",13/16",7/8".
  • The distance of the adapter from the center of the square drive to the center of the adapter opening is 2 inches. The center-to-center length on the adapter is convenient for torque calculation..
  • 12-Point box end owns reliable torque to tighten or loosen any bolt without rounding. The wall thickness of the box end has been specially designed to provide strength while still allowing enough space to contact difficult fasteners..
  • Drop-Forged steel has long lasting durability, with Heat Treated for maximum strength Each adapter is tested strictly against industry standard for hardness, torque and surface, and should last a lifetime under normal use..
Check Stock

OviiTech Polarized Outlet Socket Adapter，2 Outlet Light Socket Plug Splitter Converter Dual Polarized E26 ETL White 3PACK

  • 【Light Socket Adapter】 - standard E26 bulb socket adapter,660 Watt, 125 Volt,60Hz. You get more plug options which has two outlets on the socket ..
  • 【Wide Application】 - The adapter to wherever you need an outlet, used in workshop and any place with a standard bulb socket..
  • 【Durable】- the UL-listed high-quality materials，aluminum screw shell，And the socket is thoroughly encased in rubber to provide moisture and....
  • 【Installation and Convenient】 - Make sure to turn off the power of the lamp before installation, then install the bulb into the device, and....
  • 【12 Months Warranty】 - OviiTech supplies top-quality products along with the best service industry has to offer. We promise 3 months of free....
Check Stock

iBOLT 25mm / 1 inch to 17mm Composite Ball Adapter for Industry Standard Dual Ball Socket mounting arms- Works with All Industry Standard B Size/ 1 inch / 25mm and Garmin GPS/iBOLT 17mm Brackets

  • This iBOLT 25mm to 17mm Dual Ball Mount arm is made out of a sturdy composite material and is compatible with all industry standard 1 inch / 25 mm....
  • Commonly used as an converter with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms to any industry standard....
  • With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees. Converts a 1-inch/B Size/25mm Mount....
  • Length of this adapter is 2.5 inches measuring from one end of the arm to the other and is made out of sturdy composite material.*Mounts, holders, and....
Check Stock