Reviews Industrial Hole Drilling
4-1/2” Diamond Drill Bits Glass Hole Saw Drill Bit Set for Glass Ceramics Porcelain Ceramic Tile Marble
- SMALL DRILL BIT: Hole diameter: 115mm(4-1/2"),total length: 56mm(2.2").Package includes 1 pcs 115mm diamond hole saw drill with a transparent box..
- HIGH QUALITY: Diamond ceramic hole saw are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion..
- LARGE CLEARANCE HOLE: These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
- APPLICATION: Suitable for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, marble, light stone and fiberglass..
- WARM TIPS: Start drill at 45 Degree to surface and align to 91 Degree as hole forms.Water is required to cool down the drill when using them which will greatly extend the life of the bit..
Check StockEZARC Carbide Hole Cutter Set 9 Piece for Stainless Steel Long Life Hole Saw Kit for Hard Metal
- Industrial grade metal drilling hole cutter, more than 10 times longer life than Bi-Metal hole saw on hardened metal drilling..
- Extremely long lifetime and no teeth breakage for any tough job with high-end tungsten carbide technology..
- Provide fast and precise cuts into stainless steel, sheet metal, cast iron, mild steel, aluminum and FRP smaller than 5mm..
- Smooth cut with perfect cutting quality for every hole..
- This hole saw set includes : 5 pcs hole cutters with dimensions 7/8 inch, 1-1/8 inch, 1-3/8 inch,1-3/4 inch, 2 inch, 3 pcs pilot drill bits and 1 pc....
Check StockREETAI-FOUR 10Pcs TCT Hole Saw Kit,Tungsten Carbide Tipped Hole Saw Set, Hole Cutter Heavy Duty for Stainless Steel.(5/8\-2-1/8”)
- ...s its high hardness, rust proof and sturdy.The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
- [Application]: These Hole Saw Sets provide fast and precise cuts into 28MM thickness metal material, they are Industrial grade metal drilling hole cutter for stainless steel, metal, iron. It is also suitable for plastic, aluminum, FRP, etc. Remember to add coolant during continuous high-speed drilling..
- 【Easy to Use】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. They are suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
- 【Sincere Service】: Drill bit, spring, wrench are included, which make your job more convenient and easier.The pilot drill bit is detachable.If you have any question about product, please feel free to contact us by email or Q&A, the reply will be provided within 24 hours..
Check StockPocket Hole Jig Tool Kit for Carpentry, Pocket Hole Drill Guide Jig Set for Angled Holes, Portable Wood Pocket Hole Screw Clamp System Kit for Woodwork (Red)
- HIGH-QUALITY MATERIALS: This pocket hole jig is made of high-quality industrial grade aluminum alloy, hard and lightweight. Anodized red surface, keep excellent finish, corrosion resistance and durability. The drill holes of this pocket hole jig are inlaid with steel drill sleeves, so there is no need to worry about it being worn during drilling, causing the guide holes to become larger and lose accuracy..
- SPECIFICATIONS:Maximum thickness of wood board that can be accommodated: 12-45mm, drill size: φ4*φ9* 170mm, hole angle: 15°..
- METRIC AND INCH SCALE: There are precise scales on both sides of the pocket hole fixture. Using the golden adjusting screw, the drilling depth can be adjusted according to the thickness of the board, and it can be easily adjusted without using any auxiliary wrenches, saving your working time..
- SAVE YOUR TIME AND MONEY: Fast screw clamping, convenient assembly and disassembly, and improve drilling efficiency. Save the cost of purchasing locking C-clamp and F-clamp. Increase the chip hole for fast and smooth chip removal, saving time and effort..
- WHAT CAN YOU GET? Pocket Hole Jig x 1, Drill bit x 2, Screwdriver x 1, Pocket Hole Screws x 10, Star Screw x 1, Pocket Hole Plugs x 10, Limit Ring x 1. TIPS: If you have any questions,....
Check StockWinegard RPSK83 Replacement IDU
- 8pc Tungsten-Carbide Grit Hole Saws Specification This Industrial Quality Hole Saws Kit Is.
- And Accurate Holes In Many Types of Hard Materials..
- These Saws Can Be Able To Cut/drill Through Bricks.
- Blocks Up To 2 Thick !!! They Are Made By Machined Carbon Steel With C2 Tungsten Carbide".
- Grit Cutting Surfaces. Features: provides Easily Through-hole Drilling fits On Most Elec.
Check StockCarbide Hole Saw, 1 Inch Cutting Diameter TCT Hole Saw, Tungsten Carbide Tipped Hole Cutter with Pilot Drill Bit for Cutting Stainless Steel, Metal Sheet and Aluminum Alloy
- 【QUALITY MATERIAL】The cutting edge of the Tungsten Carbide Tipped Cutters(TCT hole saws) adopts industrial grade YG10X carbide,which can cut 5 mm stainless steel, 20mm cast iron, 3mm aluminum alloy, and 4mm hot rolled section steel..
- 【FAST CUTTING】Our carbide hole saw has 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and efficient for cutting hard metal. Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications..
- 【UNIVERSAL FIT】This TCT hole cutter is suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. It can be used in many occasions and meets the needs of most people..
- 【WARM TIPS】When processing stainless steel, please keep the drilling rig running evenly at a low speed or punch the center hole in advance for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets..
- 【BUY WITH Confidence】Ihomepark is committed to providing customers with high-quality products and thoughtful service. You can contact us at any time if you have any questions, and we wanna our customers to be 100% satisfied..
Check StockChicago Trap Drill Type Beat
- Excellent for drilling, honing, reaming and hole sawing.
- Flat back part for better pushing action while drilling and tapping.
- Composite housing with thermoplastic rubber handle grip.
- Large teasing trigger and progressive valve allowing more control to start holes.
- Supplied with high quality industrial Jacobs chucks for longer use.
Check Stockzerotop Diamond Drill Bits with Hole Saw Guide 16Pcs Hole Saw Set with Triangle Drill Bit Set & Screwdriver Suitable for Ceramic, Glass, Tile, Marble Porcelain
- 【Durable Material】The diamond hole saw is made of high-temperature sintered industrial-grade carbon steel and has a long service life. It has a nickel-plated coating to resist corrosion, wear resistance, durability. Each hole is smooth and precise surface treatment, and the top is thickened with diamond to achieve excellent cutting strength..
- 【Large Clearance Hole】The large clearance holes of the drill bit help the cooling water to enter and flush particles such as chips, reducing drilling resistance. When the debris is stuck in the small hole saw, you can use the equipped screwdriver to pull it out to make the drilling process smooth and easy..
- 【Adjustable Drill Guide】The minimum and maximum opening lengths of the adjustable hole saw guidance fixture is 4mm/0.16in and 84mm/3.3in respectively, which can fix hole saws of any size. The diamond drill bit set has two modes (fixed 3 or 4 bearings) for your choice. You take off the two big nuts and install the chassis in reverse, and install one of the bearings to the center to form a three-bearing..
- 【Wide Usage】The diamond hole saw drill bit set is very suitable for removing rings on marble, tiles, glass, ceramics, PVC or other materials. It is the excellent choice for your home decoration, D....
Check StockGlass Drill Bit Set,5 pcs Diamond Bits Hole Saw Bottle Extractor Remover Tool for Ceramics,6-14mm Set Drilling Granite Porcelain Tiles Pot Lamp Quartz Slate Pieces Fish Tank Pack Coated Grit
- 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes..
- 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases the sharpness, and effectiveness of water lubrication. Excellent for making clean and precise holes on glass or ceramic and considerably extending drill bit life..
- 【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
- 【WIDE USAGE】5 varied size drill bits Included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile, porcelain tile, ceramic tile, brick, and stone..
- 【100% Satisfaction Guaranteed】We are committed to making sure that you have a satisfying purchase experience, so if you have any questions or sugguestions, please contact us.(Log in to your account, check the order ID and click "Contact Seller" to contact us.).
Check StockWICHEMI 10PCS TCT Hole Saw Kit Tungsten Carbide Tipped Hole Cutter Set Heavy Duty Hole Saw Hole Cutting Drill Bit for Stainless Steel Copper Iron Aluminum Iron Metal Plate 5/8\ to 2-1/8\ inch
- ...t only saves cleaning time, but also shortens the cutting time. The speed of burr-free holes is faster than that of traditional twist drills or other hole saws, and has a greater advantage in cutting time..
- 【Multipurpose Tools】TCT Drill Bit sets cut quick, precise holes in 28MM thickness metal material, they are industrial grade metal drilling hole cutter for stainless steel, mild steel, alloy steel, iron,copper, aluminum, castings, plastic and brass..
- 【Wide Application】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. The carbide hole saws set are suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
Check Stockuxcell Forstner Drill Bits 40mm, Tungsten Carbide Wood Hole Saw Auger Opener, Woodworking Hinge Hole Drilling Boring Bit Cutter (Black, Silver Tone)
- total length: 90mm. Round shank, cemented carbide cutter and solid hardened steel body..
- Applications: Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc.. Forstner drill bit is for industrial purpose.
- Features: Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation.
- How To Use: Suitable for bench drill, vertical drilling machine, CNC carving machine. Processing hardwood or other hard materials should be injected with water to improve the quality and accuracy of drilling, and extend the life of the hole opener..
- Tips: Maximum speed: 1200rpm. Used on desktop (fixed) equipment, and can NOT be used on handheld power tools (such as hand drill or electric drill). Can not drill metal and non-ferrous metal. To avoid causing damage, be sure no nails or other metal objects in wood before drilling. The cutting edge and tip of the opener should be sharpened in time..
Check Stockkwb Diamond Tile Hole Drill for Angle Grinder, Hole Saw with M14 Mount, Diamond Drill bit Diameter 42 mm
- Diamond scattered dry cut hole saws (M14) are equipped with high-quality, temperature-resistant industrial diamonds and are therefore suitable for high demands in the do-it-yourself sector, but also for professional use..
- The glass and tile drill has a length of 60 mm and a cutting depth of 40 mm with a hole saw diameter of 42 mm. It can be used in all commercially available angle grinders with an M14 threaded spindle..
- The glass drill is filled with cooling wax and requires no additional cooling.
- the time-consuming preparation for this is no longer necessary. The tool made of high-quality materials enables the ambitious user to work with high drilling speeds and a long service life..
- The dry-cutting hole saw with its diamond-spread drill bit is ideal for dry drilling of hard and brittle materials. It is thus possible, for example, to drill holes for sockets, switches and flush-mounted sockets in tiles or glass. Ceramics, porcelain stoneware, granite and marble can also be processed with the diamond tipped drill bit..
- The drill is delivered protected in a practical screw tube packaging. (Art. No. 500242).
Check Stock30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)
- ...16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
- [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
- [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
- [Precautions]:1,Cool the drill bit with water when opening the hole. Good cooling can extend the applicable life of the drill bit. Do not dry the drill without adding water. Otherwise, the drill bit may be damaged.2,Choose the processing materials, do not apply to tempered glass drilling..
Check Stock