Reviews Industrial Furnaces

Fluke 51 II Single Input Digital Thermometer

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperatures in celsius, fahrenheit, or kelvin via a type k, type j, type t, or type e thermocouple probe.
  • Includes a type k bead thermocouple probe with a 40" cable that measures from minus 40 to +260 degrees c ( minus 40 to +500 degrees f).
  • Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
  • Conforms to nist standards for compliance with regulations.
Check Stock

Loctite 518 51817 6ml Red Gasket Eliminator Tube

  • RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
  • FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area..
  • MULTI-USE. Valve covers, rocker covers, oil pans, water pumps, end seals, intake manifolds, and rear axle housing as well as industrial furnaces, ovens, etc..
  • CONVENIENT CURING. Tack-free in 1 hour. Full-strength in 24 hours..
  • LOCTITE 596 RTV RED SILICONE replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..
Check Stock

Fluke - FLUKE-52-2 60HZ 52-2 60HZ Dual Input Digital Thermometer

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, or Type E thermocouple probe.
  • Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
  • Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
  • Conforms to NIST standards for compliance with regulations.
Check Stock

Thomas Traceable Total-Range Thermometer, -328 to 2498 degree F, -200 to 1370 degree C

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperature from -200 to 1370 degrees C (-328 to 2498 degrees F), with an accuracy of + or - 0.2 degrees C.
  • Type K thermocouple probe with 4-foot cable.
  • Minimum/maximum memory and 24-hour countdown timer for long-term temperature monitoring.
  • Calibrated to ISO 17025 traceability standards for reliability of measurements.
Check Stock

Enerco 60105 Mr Heater Heatstar 45/75 Unit Heater Circuit Board

  • 60105 Control Boards Ship Same Day Directly from Allparts Equipments Amazon Part Center located in Michigan.
  • 1 Year Extended Warranty provided when purchase only at Allparts Equipment.
  • Fits All MHU and HSU Furnaces from 45,000 to 1255,000 BTU.
  • 60105 Ignition Control Circuit Board for All Enerco Compact Furnaces.
Check Stock

RV Furnaces Bug Screen, Flying Insect Screen for RV Refrigerator Vents,RV Water Heater Screenwith Installation Tool, 20\ x 1.5\ & 2.8''x1.3'' & 8.5\ x 6\ x 1.3\ & 4.5'' x 4.5'' x 1.3'' RV Water Heater Screen (7-Piece Set)

  • Package includes：Three 20" x 1-1/2" RV Furnaces Bug Screens；Two 2.8''x1.3'' Circular Flying Insect Screens；One 8.5" x 6" x 1.3" Rectangular RV Water Heater Screen；One 4.5'' x 4.5'' x 1.3'' Square RV Furnaces Vent Mesh Screen.
  • Heavy-duty stainless steel RV bug screen, absolutely strong material, combination product, multi-purpose, more cost-effective.
  • 20" x 1-1/2" screen fits Dometic refrigerator vents which have 20" long louver openings.Others fit Atwood Hydroflame Furnaces that do not have access doors, and exhaust vent of Girard Tankless Water Heater.The product is not sponsored or endorsed by Atwood Hydroflame.
  • We have a special installation tool that is easy to operate and ready to install the RV Furnaces Vent Mesh Screen at any time.
  • Protects RV Furnaces From external creature and Prevents RV Vent Damage. Reliable multi-year parts supplier, a more valuable combination product.
Check Stock

Fluke 52-2 Dual Input Digital Thermometer, 3 AA Battery, -418 to 2501 Degree F Range, 60 Hz Noise Rejection

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, or Type E thermocouple probe.
  • Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
  • Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
  • Conforms to NIST standards for compliance with regulations.
Check Stock

621931 - Nordyne OEM Replacement Furnace Relay

  • Alternate part numbers include 525-37325-000, HN67QC006, ZC24A34-4, IES24A34-4, 24A34-4, 60000EO49, 33245, and 33845..
  • Q Series Sequencer, field proven for controlling the operation of heating elements and/or blower motors in electric, gas or oil heat systems. This sequencer has 2 switches & turns on at 30-90 seconds, and off at 1-30 seconds. UL and CSA approved 24 volt control circuit Five second delay between all subsequent stages, unless they function together..
  • Applications: Oil furnaces, gas furnaces, heat pumps, and electric furnaces. It is important to disconnect your appliance from the power supply before servicing..
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify fitment with your specific application..
  • SD products come in Supplying Demand packaging that includes helpful information should you have any issues..
Check Stock

Fluke 53-2 Single Input Digital Thermometer with USB Recording, 3 AA Battery, -418 to 3212 Degree F Range, 60 Hz Noise Rejection

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe.
  • Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
  • Stores up to 500 points of data for analysis and monitoring.
  • Conforms to NIST standards for compliance with regulations.
Check Stock

42-23116-07 - Ruud OEM Replacement Furnace Heat Sequencer Relay

  • Alternate part numbers include 12F20, 58C9701, B129096, 525-37322-000, ZC24A34-1, IES24A34-1, 24A34-1, 24A34-7, 24A34-13, 6000AONI-98, 33241, and 33841..
  • Field proven for controlling the operation of heating elements and/or blower motors in electric, gas or oil heat systems. | This sequencer has 1 switch & turns on at 1-20 seconds, and off at 40-110 seconds. | 24 volt control circuit | Five second delay between all subsequent stages, unless they function together.
  • Applications include: electric furnaces, heat pumps, gas furnaces, and oil furnaces. It is important to disconnect your appliance from the power supply before servicing..
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify fitment with your specific application..
  • SD products come in Supplying Demand packaging that includes helpful information should you have any issues..
Check Stock

Goodman B12565-53S • Aftermarket Replacement 15 KW Heat Sequencer Relay

  • Alternate part numbers include 40CF680020, ZC24A34-2, IES24A34-2, 24A34-2, 6000AOIN-97, 33242, and 33842..
  • Field proven for controlling the operation of heating elements and/or blower motors in electric, gas or oil heat systems. This sequencer has 1 switch & turns on at 30-90 seconds, and off at 1-30 seconds. | 24 volt control circuit | Five second delay between all subsequent stages, unless they function together | UL and CSA approved.
  • Applications include: electric furnaces, heat pumps, gas furnaces, and oil furnaces. It is important to disconnect your appliance from the power supply before servicing..
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify fitment with your specific application...
  • SD products come in Supplying Demand packaging that includes helpful information should you have any issues..
Check Stock

GAIN EXPRESS K-Type Thermocouple Thermometer with 4 Probes(Wired & Stainless Steel) Dual Channel High Temperature Kelvin Scale Meter Indicator

  • Temperature Range: Main Unit: -50~1300°C (-58 ~ 2372°F).
  • Wired Thermocouples included: -50 ~ 400°C (-58 ~ 752°F).
  • Stainless Steel K-type Probe: -50~700°C (-58~1292°F).
  • Accuracy: Reading is accurate (0.1% ±0.4°C), quick respond with K-Type Thermocouple Probes.
  • Differential Temperature Measurement (T1 - T2): has specially designed "T1-T2" calculation function that facilitates users to find the difference between 2 samples easily..
  • Easy To Use: Operate with 6 simple buttons, comes with rubber holster that protects the meter from drop impact..
  • Wide range of applications in Ovens, Furnaces, Ceramics, Pottery, Molten Metal, and many other industrial uses..
Check Stock

6802 II Durable Precision Dual Channel Digital Thermometer with 2 K-Type Thermocouple Sensor

  • WIDE USAGE – It has a wide range of applications in Ovens, Furnaces, Ceramics, Pottery, Molten Metal and many other industrial uses..
  • EASY USE – 5 digits large LCD display, overload display alert when input exceeds measurement range. Temperature read-out in ¡ãF or ¡ãC selectable, selection between Celsius and Fahrenheit..
  • SUPERIOR FUNCTION – The thermometer has advanced features with 5 digits LCD Display and able to display Higher Temperature Range (up to 1300 °C / 2372 °F), Higher Resolution (up to 0.1 °C / 0.1 °F) and Higher Accuracy (up to 0.1 °C). Moreover, you can fine tune the temperature by using Self-Calibration Function and Restore Factory Setting..
  • HIGH QUALITY – Made of high quality plastic,Rugged, refined, the machine uses a durable electronic components..
  • WARM NOTE – The batteries are not included in the package due to Aviation Security Check..
Check Stock