Reviews Industrial Ethernet Poe Splitter

AuviPal 802.3af/at Compliant PoE Splitter (2 Pack), PoE to Micro USB 5V Power and 100Mbps Ethernet Adapter for Raspberry Pi, Fire TV Ethernet Adapter, Chromecast, Wyze Cam v2, Arlo 2 Pro, NanoPi

  • Deliver DC 5V 2.4A Power and up to ultra-fast 100M Ethernet data for raspberry pi simultaneously, No need for a nearby AC outlet anymore..
  • Original from AuviPal with 10/100Mbps wired fast speeds which gives you a full speed of your internet, Ideal for providing both power and Ethernet for Raspberry Pi 1B, 1B+, 2B, 3B, Not for latest model 3B+, Please search "B07PNQC25X" on amazon for 3B+..
  • It utilizes the optimal PoE module solution with Isolation transformer + Standard PD (Powered Devices) chip. Run your Raspberry Pi more stable and safer when compared with others cheap non-isolated transformer and diode PD module..
  • PoE HAT Alternative - a cost savings way to achieve POE function for your Raspberry Pi instead of buying an overpriced PoE HAT, What’s more, no need to dismount raspberry pi case or add-on screen anymore by using AuviPal PoE Splitter..
  • Fully complies with IEEE 802.3af/at standard, Work with all IEEE 802.3af/at compliant PoE switch and PoE Injector (Not included). Plug and play, no extra effort or configuration required, Set it up in seconds..
Check Stock

2Pack RJ45 Ethernet Splitter Cable Network Adapter 1 Male to 2 Female, Suitable Super Cat5, Cat5e, Cat6, Cat7 Connector LAN Ethernet Cables Internet Adapter, Black

  • 【Ethernet 1 to 2 Splitter Cable Multi-Functions】You can easily convert the RJ45 connection to two RJ45 sockets, allowing two computers to share high-speed DSL, cable modem and Ethernet ports without the need for a router..
  • 【Widely Compatible】Ethernet Splitter 1 2 Suitable for RJ45 device interface, Compatible with Cat7/6/5/5e, for ADSL, Hubs, Switch, TV, Set-top Box, Router, POE Camera, Computer..
  • 【Durable and Good Material】a 2mm thick PCB board is embedded in the conductive circuit to avoid damage to the conductor and leakage. Ensure a longer service life..
  • 【Lossless anti-interference】The eight-core pure copper gold-plated pin and Crystal protective cover, 100m stable transmission, metal shielding, non-interference and lossless anti-interference..
  • 【Recautions for use】RJ45 Ethernet Splitter does not support two devices to surf the Internet at the same time! Only one device can be connected to the Internet at a time..
Check Stock

8 Port PoE Injector All in One DC12V-48V 8 Interfaces Passive Adapter Power Over Ethernet Module Injector

  • [HIGH QUALITY ]---It does not have auto detection function and directly supply power to the network devices by force as soon as you connect them，all products are rigorously certified.
  • [ DURABLE QUALITY]---Apply for IEEE802.3af/at standard POE powered devices other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices. durable quality.
  • [MATERIALS]---With high quality materials,This Non standard passive injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable..
  • [SAFE]---Conform to international safety product standards and safe,Suitable for widely used.
  • [STABLE]---Made of plastic material, sturdy and durable to use.the performance is stable and reliable.
Check Stock

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

  • Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
  • This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
  • This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
  • This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
  • Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock

TRENDnet 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, 8 x Gigabit PoE+ Ports, DIN-Rail Mount, 2 x SFP Slots, 240W PoE Power Budget, Network Switch, IP30, QoS, Lifetime Protection, Black, TI-PG102

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, 2 x Gigabit RJ-45 / SFP shared ports.
  • POE+ POWER & SWITCHING CAPACITY: A 20Gbps switching capacity and 240W PoE power budget supplies up to eight Power over Ethernet devices with PoE+ power.
  • DIN-RAIL & WALL MOUNT KIT: This 10-Port gigabit PoE+ industrial switch comes with an integrated DIN-Rail mount and mounting hardware.
  • EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated gigabit PoE+ switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments.
  • REDUNDANT POWER: The 10 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: 48VDC3000 / TI-S24048.
  • GROUDING POINT: 10-port Ethernet switch grounding point feature protects equipment from external electrical surges.
  • SHOCK & VIBRATION RESISTANT: The Ethernet switch is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6).
Check Stock

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • 【11port poe switch@150W 】PoE switch with 8 100M port PoE + 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechani....
Check Stock

【Upgraded】LINOVISION POE Over Coax EOC Converter IP Over Coax Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable for Upgrading Analog Surveillance System to IP Surveillance System

  • ...onverter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart..
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight..
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable, so as being used with twist pair. EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices..
  • 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..
Check Stock

TRENDnet 6-Port Fast Ethernet PoE+ Switch, 4 x Fast Ethernet PoE Ports, 2 x Fast Ethernet Ports, 60W PoE Budget, 1.2 Gbps Switch Capacity, Metal, Lifetime Protection, Black, TPE-S50

  • ETHERNET PORT INTERFACE 4 x Fast Ethernet PoE+ ports and 2 x Fast Ethernet ports.
  • POE POWER BUDGET & SWITCH CAPACITY: This PoE+ switch supports both PoE (802.3af) and PoE+ (802.3at) devices with a 60 W PoE power budget that delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points, VoIP phones, and IP Cameras. The 6-port fast Ethernet PoE+ network switch provides 1.2 Gbps switching capacity to support edge network installations..
  • COMPACT FANLESS DESIGN With a compact and lightweight rugged metal housing design this desktop switch is well-suited for desktop installations Its fanless design is ideal for quiet environments that require silent operation.
  • DATA TRANSFER RATE Ethernet 10 Mbps (half duplex) 20 Mbps (full duplex) Fast Ethernet 100 Mbps (half duplex) 200 Mbps (full duplex).
  • OPERATING TEMPERATURE This 6-port fast Ethernet PoE+ network switch is rated with an operating temperature range of 0 – 40 °C (32 - 104 °F).
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection. Renewed or refurbished products come with a 90 day Amazon Renewed Guarantee..
Check Stock

MokerLink 18 Port Gigabit PoE Switch, 16 Gigabit PoE+ Ports, 2 Gigabit Uplink, 250W IEEE802.3af/at, Metal Rackmount Unmanaged Plug and Play Ethernet Switch

  • 18 Gigabit Ethernet Ports: Includes 16 Gigabit POE+ ports and 2 Gigabit UpLink. All port support 10/100/1000Mbps, high speed transmission.
  • 2 uplink, can be more flexible to connect to different network devices, such as routers, NVRs, servers, etc..
  • High POE Power: Maximum support 250W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*.
  • Unmanaged Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: The traffic are isolated from PoE Port 1-16,just only communicate with the uplink port 17/18, reduce network congestion, increase bandwidth utilization and improve network security.
  • Widely Used: Small and compact size design. Durable Metal housing. LED indicator lights. Industrial fan ensure good heat dissipation. Widely used in home and business network, such as IP cameras, Wireless Access Point, Computer Networks devices, etc..
Check Stock

Tripp Lite Industrial CAT6 Ethernet Cable, Outdoor Rated UTP Network Patch Cable, 100W PoE, CMR-LP, IP68 Rated, Blue, 33 ft. (N200P-033BL-IND)

  • 33 FT: Deliver power to PoE devices, and distribute data, voice and video at higher speeds and quality with Tripp Lite’s Category 6a 10G Ethernet industrial patch cable. Ideal solution for connecting gigabit ethernet networks or digital signage in factories, warehouses, recycling plants, machine shops and other dusty environments. Length: 33 ft. / Color: Blue / Connectors: RJ45 Male.
  • OUTDOOR RATED: Industrial ethernet cable with IP68-rating means the Cat6 cable is 100% protected against dust, and able to endure immersion in 1. 5 meters of water for up to 60 minutes with no damage or decline in performance. Ideal to provide Cat6 connectivity in outdoor environments susceptible to rain, such as a stadium or outdoor arena and other areas where protection from harsh elements is essential..
  • INCREASED POWER: CMR-LP certified cable provides a simple way to prepare installations for increased power levels without having to worry about issues caused by excessive heat. UL's Limited Power (LP) certification indicates the N200P-033BL-IND has been evaluated to handle the marked current under installation scenarios without exceeding the temperature rating of the cable..
  • BLUE CAT6 100W CABLE: Because this Cat6 patch cable supports High-Power 100W PoE (71W ....
Check Stock

YuanLey 6 Port PoE Switch with 4 Port PoE+, 2 Ethernet Uplink, 100Mbps, 78W 802.3af/at, Extend Function, Metal, Desktop, Unmanaged Plug and Play

  • 【Port and Rate】This poe ethernet switch Include 4x10/100Mbps POE ports and 2x10/100Mbps uplink. All 1-4 POE ports support IEEE802.3AF/AT POE standard. The double uplink port can connect to nvr, switch, router, etc, make the network more reliable and flexible..
  • 【78W High PoE Power】This poe injector built-in industrial power supply. The whole power is 78W, each port up to 30W and 15.4W in the same time.**Please note: not compatible 24V passive PoE**.
  • 【Plug and Play】This poe network unmanaged switch support automatically detect devices, just plug in the power cord and network cable, no configuration required, easy to use..
  • 【Extend Function】 When the extend mode is enabled, single POE port supports 250m transmission distances and 10Mbps speed, and all PoE ports support VLAN isolation, improve the network safety..
  • 【Wide Applications】PoE and non-POE devices can be connected to this poe hub, such as poe camera/wireless ap, switch, router, computer, etc. It runs without noise and can be installed in office, home, and commercial locations. If you have any questions, please contact our official support, we will provide the best after-sales service.
Check Stock

MokerLink PoE Switch, 6 Port and 10 Port PoE Switch, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • 6 Port PoE Switch: 4 Port PoE+, 2 Port uplink, 100Mbps, 78W.
  • 10 Port PoE Switch: 8 Port PoE+ 100Mbps, 2 Port Gigabit Uplink, 120W.
  • Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock