Reviews Industrial Ethernet Io link Master

HangTon M12 A Coded 5 Pin Male to Female Actuator Sensor Signal Cable for Industrial Controls Automation, Device Network DeviceNet, CANopen, IO Link, Profibus 2m

  • M12 A Coded Actuator Sensor Signal Cable.
  • M12 A coded aviation connector 5pin male to 5pin female.
  • Length 2 meters. 24AWG 5-conductor wire, PVC jacket.
  • The 5-pin connector has plastic cover, with braided shield.
  • for Sensor, Industrial Controls Automation, Device Network DeviceNet, CANopen, IO link, Profibus.
Check Stock

VONETS Industrial Mini 5GHz WiFi Bridge/Router WiFi to Ethernet Adapter 802.11a/n/ac(900Mbps) 2 RJ45 Ports /Antennas USB/DC Powered (DC5V-24V) for DVR Monitoring PLC Medical Device VAP11S-5G

  • Industrial Mini 5GHz WiFi Bridge/Router(small size).
  • Can achieve WiFi to Wired or Wired to WiFi function(Ethernet to WiFi or WiFi to Ethernet convert).
  • Support WiFi 802.11a/n/ac, WiFi rate: 900Mbps.
  • 2 Ethernet ports 10/100Mbps adaptive,(USB/DC power supply cable.
  • One 10/100Mbps adaptive Ethernet port (one 30cm cable with 1 male RJ45 port)..
  • Support two kinds of application methods: Router mode (support WiFi WAN up link and WAN/LAN exchange).
  • WiFi Bridge ( IP layer or MAC layer transparent transmission).
  • Powered by wide voltage DC5-24V(Typical 5V/2A, ripple less than 100mV), two-stage automatic overvoltage protection (Protection voltage upper limit 27V),USB or DC optional powered mode.
  • 1 Fixing Kit and 1 Industrial DC connector, more suitable for industrial applications.
  • Support SSA signal strength detection reporting function,motion detection function and memory hotspot(Up to 100) automatic matching connection function, realize to WiFi motion applications.
  • WiFi Tx Power:19dBm/23dBm optional(Enhanced Power), 2 X 3dBi external antennas.
  • Point-to-point transmission distance: maximu....
Check Stock

BikeMaster 525 BMXR Bulk Chain/Link Clip Link - Gold Yellow

  • The 410 Chain Master Link will replace that old, busted 410 chain's master link.
  • Installation couldn't be easier: with a chain breaker, remove your old master link. In the open ports, slide the new master link's pegs through and then the link cover plate over them on the opposite side. Slide the locking plate on to both pegs of the master link, and you're ready to ride.
  • Note: 410 master links will only work on 410 chains, and are not compatible with 415 chains.
Check Stock

Vortex 520 RX3 V3 2.0 Master Link (Rivet) (Black)

  • ✅420 Chain Master Links 8pcs with 2pcs Extra Gold 420 Chain Master Link..
  • ✅420 Chain Master Link Premium Quality: Made of alloy steel, heavy duty and long durabiltiy..
  • ✅420 Chain Master Link for For 50cc, 70cc, 90cc, 110cc, 125cc motorcycle, atv, quad, scooter, go kart, moped, pit bike, dirt bike, pocket bike that uses 420 chain..
  • 420 Chain Master Link Specifications: No: 420.
  • ✅420 Chain Master Gold Link Uses a special steel alloy designed to protect against “heat cracking” in cold weather due to severe heating and cooling during competition..
Check Stock

HIAORS 428 Connecting Master Link for Motorcycle ATV Go Kart Dirt Bike Pack of 5

  • ✅ #420 Chain master link for 50cc 70cc 90cc 110cc 125cc Dirt Bike Pit ATV, ct200u Mini Bike, Scooter, Quad, etc..
  • ✅420 drive chain master link Specifications: No: 420.
  • ✅ 420 Master Link Premium Quality: Made of alloy steel, heavy duty and long durabiltiy..
  • ✅Gold 1 PC 420 Master Connector Uses a special steel alloy designed to protect against “heat cracking” in cold weather due to severe heating and cooling during competition..
  • ✅ #420 Chain master link 4 PC ,420 drive chain master link Gold 1 PC-.
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

Oumers Bike Link Plier, Chain Plier Missing Link 2 in 1 Opener Closer Remover Plier/Bicycle Chain Plier Compatible with All Speed Chains Repair, Link

  • Our this missing link pliers made of high quality steel, heavy duty and durable. Ergonomic handle for comfortable use and to help apply the correct force, will last the test of time!.
  • 2-in-1 Master Link Chain Pliers - Used for quick removal of joining links, advanced tool for both open and close, chain master link remover and connector, replace SRAM, KMC, Shimano & Clark’s Chain Links - all speed chains, missing links.
  • Non-slip handle, spring design for saving effort, more easy to use, both removes and reassembles master links.
  • The master link plier with the safty pin protect from over opening, also there is a return spring keep the plier ready for work. Bottom of the chain plier handle with a clasp, close the clasp for small size for storage.
  • Perfect for the home mechanic. Compatible with 5, 6, 7, 8, 9, 10 and 11-speed derailleur chains that use a master link, allows you to effortlessly remove and replace chain links in seconds.
Check Stock

HiLetgo 5pcs Nano IO Shield DIY Nano IO Expansion Board DIY Kits for Arduino Nano

  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • New Expansion Board Terminal Adapter DIY Kits for Arduino NANO IO Shield V1.0.
  • Leads all pins out, convenient for wiring and doing experiments.
  • IO Expansion Shield For Arduino Nano is specifically designed to facilitate.
  • In essence, it expands for Arduino Nano controller to link those devices in a simple and trouble free manner..
Check Stock

Red Lion Controls/N-Tron CR30000400000310 4.3\ Widescreen HMI with 3 Serial, 1 Ethernet, 1 USB Host, USB Device, Web Server and Data Logging

  • Compact, rugged, industrial-grade RS-485 device server.
  • Modbus RTU to Modbus TCP protocol converter, Modbus gateway for master and slaves.
  • Supports TCP and UDP for both Server and Client modes, support Httpd Client mode.
  • Designed for harsh industrial environments, 15kV ESD and 600W surge protection, Operating temperature: -40ºF to 185ºF / -40ºC to 85ºC.
Check Stock

#35 Chain Master Link Roller 4 PC,#35 Master Connector Gold 1pc- 35 Master Link Chain for Go Kart, Mini Bike Chain - by Epromiseparts

  • ✅ Choose the ideal cuff Gold Link #35 Chain Master Link uses a special steel alloy designed to prevent "hot cracking" during cold weather due to 2 Cycle Motorized Bicycle Bike , intense heating and cooling during on the road.
  • ✅35 Master Link Premium Quality: Made of alloy steel, heavy duty and long durabiltiy..
  • ✅#35 Chain Master Link 4 PC , 35 Mater Link Gold 1 PC.
  • ✅ #35 Master Connector HASSLE-FREE: This Roller Chain Tool Kit is Easy for Motorcycle, clean and grease this one regularly. an update in 2,000 miles (about 4 months)..
  • ✅#35 Chain Master Link For Go Kart, Mini Bike Chain.
Check Stock

USRobotics USR325686E 56K Serial Port Fax Modem

  • USR-G781 is Industrial Serial RS232 RS485 to 4G LTE Modem with Ethernet /LAN Port and Sim Card Slot.
  • ARM High Performance Processor, Support 4 Socket Independent Connection.
  • Heartbeat Packet: can be sent to Serial or Network Periodic. To Ensure Connection is Reliable, put an end to Dead Link.
  • Identity /Registration Packet: Identified Header can be Added to Packets to Check Connection Status.
  • Serial port protection: Reverse Connection Projection, ESD Anti-Surge, Anti-static, Surge Protection.
Check Stock

VONETS VAP11G-300 WiFi Bridge 2.4GHz WiFi to Ethernet Convert/WiFi Repeater/Point to Point with RJ45 Male DC/USB Powered for PLC IP Camera Printer Medical Devices Network Devices

  • 【2.4GHz WiFi Bridge/Repeater】Industrial 2.4GHz Mini WiFi Bridge/Repeater, can achieve WiFi to Wired or Wired to WiFi function（Ethernet to WiFi or WiFi to Ethernet convert).
  • 【Support Multiple application】1. WiFi repeater, 2. WiFi bridge ( IP layer or MAC layer transparent transmission), 3. WiFi-AP hotspots. Realize WiFi smart bridge function, WiFi to wired, wired to WiFi, smart exchange..
  • 【Point-to-Point Transmission】Maximum can be up to 100 meters when without obstacles and small data, less than 50 meters when used for video transmission, 2 X 1.5dBi internal antennas. It's a good partner for monitoring, electronic scales, DVR, IP camera, medical devices, IoT devices, video transmission, industrial PLC, PS3, network Printer, robot, doll machine, and more network applications..
  • 【Configuration Parameters】Support wide voltage DC 5V-15V(Typical 5V/1A, ripple less than 100mV), the average power consumption is less than 2.5W. Equipped with a 30cm power cable, one male DC port, one male USB port, one female DC port of the parallel connection, and one 10/100Mbps adaptive Ethernet port..
  • 【IP/MAC Layer Transparent】Support IP layer transparent transmission and MAC layer transparent transmission in t....
Check Stock

US Cargo Control - 3/8 Inch x 10 Foot Adjustable 4-Leg Chain Sling with Self-Locking Hook - Grade 100 Alloy Steel - Overhead Lifting Sling for Large and Heavy Cargo

  • DURABLE LIFTING CHAIN - Our Grade 100 lifting chain provides approximately 25% higher strength than Grade 80 chains, the industry grade for chain slings. They maintain their strength under extremely high temperatures up to 400 degrees Fahrenheit..
  • ADJUSTABLE CHAIN LENGTH - Lifting chains measure 10 feet in length from master link to end hook. Our chain slings come with grab hooks attached to the master link to shorten the chain to any desired length..
  • WORKING LOAD LIMITS - Chain slings can handle up to 22,900 pounds at a 60-degree hitch, 18,700 pounds at a 45-degree hitch, and 13,200 pounds at a 30-degree hitch..
  • HIGH-STRENGTH SELF-LOCKING HOOK - These industrial grade self-locking hooks automatically close and lock under the weight of the load for safe and secure rigging. Do not open while lifting..
  • WIDE APPLICATION - Chain slings provide safe use for any of the toughest overhead lifting and rigging tasks on a regular or repetitive basis..
Check Stock