Reviews Industrial Equipment Adapter

Weather Station With Arduino And Android Studio

  • The pluggable DS18B20 temperature probe sensor is easy to plug and can be used in a variety of environments..
  • With pull-up resistor on board, the adapter module can be connected directly to most microcontrollers and it is widely used in temperature monitoring for fish tanks, equipment, machinery, greenhouses..
  • Widely applications: thermostatic controls, industrial systems, consumer products, thermometers, any thermally sensitive system, etc..
  • Working voltage: 3.3 ~ 5VDC, Output leads: yellow (DATA), red (VCC), black (GND).
  • Measuring range: -55 ~ 125 ℃, Lead can only withstand a maximum temperature of 85 degrees.
Check Stock

MokerLink 5 Port Industrial Din Rail Switch, 4 Ports and 1 Uplink, 10/100Mbps Fast Ethernet, DIN-Rail & Wall Mount Included

  • This network switch include 4 port ethernet ports, 1 port uplink, support 10/100Mbps adaptive, compliant with IEEE 802.3, IEEE 802.3u, IEEE802.3x ethernet standards.
  • The shell is made of industrial-grade aluminum alloy, which is more sturdy, compact design and small size, integrated DIN-rail and wall mount kit, installation and disassembly are very simple.
  • 1 DC Power and 2 Industrial power(4 pin terminal), total of 3-way power supply is more flexible. Automatic fault switching, anti-reverse connection does not damage the equipment, higher reliability. ***Please note that the power adapter is not included***.
  • IP30 protection grade, working temperature -40~75°C(-40~185°F), super robustness, anti-lightning, anti-static and anti-overload protection, adapt to various harsh environments.
  • Support auto-negotiation, plug and play, no configuration needed, low-power consumption CPU, no fan quiet operation, green energy saving, suitable for various networks, such as home office, computer room, warehouse, factory, compact control box and other industrial scenarios with ethernet access.
Check Stock

EZSync HDMI to Terminal Block Adapter Kit, 2X Pack, Solderless Breakout Board, Plastic, EZSync912

  • The EZSync912 HDMI to terminal block adapter connects all 20 signals(including shielding) from a HDMI connector to two 10-position terminal block connector. The two 10-pin terminal blocks support screw-type wiring with enclosure and cable strain relief suitable for heavy duty industrial wiring applications..
  • Plastic case. Solderless terminal block. Compatible with HDMI 2.0, 1.4 and 1.3. Distance will be depending on cable quality..
  • Each package contains 2x sets of adapter kit. Size: Body-50mm x 23mm x 18mm.
  • Wiring diagram provided in image is for typical installation. The actual wiring could be different depending on your equipment..
  • If you don't know the wiring order on the other end of the cable, you need to ohm it out if you have a meter or cut the other end and re-wire both ends.
Check Stock

Agastat TE Connectivity 7022AC Time Delay Relay 120VAC Off-Delay 1.5 - 15 Seconds

  • Double way USBCAN II Debugger with 2 Road CAN interface, PC can be connected to a standard CAN network through the USB bus, the construction of Field bus testing laboratory, industrial control, intelligent building, data processing, automotive electronic.Support VC++, C#, VB, Labview and other two development interface functions..
  • Double way USBCAN II The debugger equipment, CAN bus circuit adopts DCDC power module, industrial grade magnetic coupling isolation chip CAN bus isolation, the interface adapter has a strong anti-jamming capability, greatly improve the reliability.Systems support for WIN98, for WIN200, for XP, for WIN7, for WIN8, for WIN10..
  • Double way USBCANII The debugger can use the USBCAN tools provided by our shop, directly to the CAN bus configuration, send and receive. Users can also refer to the store to provide the DLL dynamic link library, routines to write their own applications. Intuitive, fast hardware filter settings.Added USB protection, CAN bus protection circuit..
  • Double way USBCAN II debugger can be used as a standard CAN bus, CAN bus is CAN bus equipment product development, testing, a powerful tool for data analysis.
  • at the same time, the USBCAN debugger has the characteristics of small volume, convenient insta.
Check Stock

6A

  • Rated Current 6A/10A/20A/30A/40A/50A/100A(Optional).
  • Compact size, easy to install with stud connection.
  • Widely used in all kinds of 3-phase 3-wire industrial automation equipment, such as 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners etc..
  • If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

3M 467MP Clear Adhesive Transfer Tape, 2\ Width x 20yd Length (1 roll)

  • High speed processing of parts in the medical, telecommunications and electronics markets (medical components, durable labels, flexible circuits)..
  • Long term bonding of graphic nameplates and overlays (“subsurface” printed polycarbonate or polyester) to metal and high surface energy plastics in the aerospace, medical and industrial equipment, automotive, appliance and electronics markets.
  • Bonding metal nameplates and rating plates in the aerospace, medical and industrial equipment, automotive, appliance and electronics markets.
  • Bonding graphic overlays for membrane switches and for bonding the complete switch to the equipment surface.
  • High speed processing of parts in the medical, telecommunications and electronics markets (medical components, durable labels, and flexible circuits).
  • Lamination to industrial foams for rotary die-cutting of small gaskets for industrial and electronics markets.
Check Stock

TERA PUMP Heavy Duty Steel Barrel Clear Pump with Telescopic Suction Tube For use on 15 to 55 Gallon Drums Compatible Liquids Diesel Oil, Motor Oils, Heavy & Light Oils

  • [ TRANSFER RATES ] Transfers up to 10 Gallons per Minute with Manual Dual Directional Rotary-Action - Curved Gooseneck Spout with 0.9-inch Opening - Made of industrial strength cast-iron body with precisely machined iron vanes - Professional Geared Rotary Barrel Pump.
  • [ RECOMMENDED ] Suitable for Gasoline, kerosene, oil, diesel, hydraulic fluid, lubricating oil, antifreeze (ethylene glycol), ethylene glycol, other non-corrosive liquids - Portable, Light Weight and Heavy Duty Material - Filtered Suction Tube to prevent any unwarted debris.
  • [ TELESCOPIC TUBE ] Suction Tube length of about 40-inch, Fits 15-Gallon (50 Liters) and up to 55 Gallon (205 Liters) Drum Barrels - Suction end Outer Diameter: 1-inch - Complete with built-in & 2-inch NPS bung adapter for Drum Barrels with 2-inch Openings, Simply slide the bung adapter to the size of the drum.
  • [ MANAUL POWERED ] No Electricity Required: Utilizes lever-action to transfer liquids by a simple grip and pump - Works great with farm equipment, Industrial Vehicles and in Automotive Shops - Quickly Empty 55 Gallon Drum Barrels.
Check Stock

3M 6-5-467MP (CASE of 2) Adhesive Transfer Tape 467MP, 6\ Wide, 5 yd. Length, Clear (Pack of 2)

  • Best for graphic attachment and membrane switch applications.
  • Long term bonding of graphic nameplates and overlays (“subsurface” printed polycarbonate or polyester) to metal and high surface energy plastics in the aerospace, medical and industrial equipment, automotive, appliance and electronics markets.
  • Bonding metal nameplates and rating plates in the aerospace, medical and industrial equipment, automotive, appliance and electronics markets.
  • Bonding graphic overlays for membrane switches and for bonding the complete switch to the equipment surface.
  • High speed processing of parts in the medical, telecommunications and electronics markets (medical components, durable labels, and flexible circuits).
  • Lamination to industrial foams for rotary die-cutting of small gaskets for industrial and electronics markets.
Check Stock

3M 12X12-12-467MP Adhesive Transfer Tape 467MP, 12\ Wide, 0.33 yd. Length, Clear (Pack of 12)

  • Best for graphic attachment and membrane switch applications.
  • Long term bonding of graphic nameplates and overlays (“subsurface” printed polycarbonate or polyester) to metal and high surface energy plastics in the aerospace, medical and industrial equipment, automotive, appliance and electronics markets.
  • Bonding metal nameplates and rating plates in the aerospace, medical and industrial equipment, automotive, appliance and electronics markets.
  • Bonding graphic overlays for membrane switches and for bonding the complete switch to the equipment surface.
  • High speed processing of parts in the medical, telecommunications and electronics markets (medical components, durable labels, and flexible circuits).
  • Lamination to industrial foams for rotary die-cutting of small gaskets for industrial and electronics markets.
Check Stock

Neewer 2 Packs 9 feet/260 centimeters Photo Studio Light Stands for HTC Vive VR Video Portrait and Product Photography

  • The light stand is made of aluminum alloy, making it strong for heavy duty work..
  • Made by the industrial standard, it supports all major brands of photo equipment such as reflector, softbox, different lights, umbrella, background,....
  • Height is adjustable from 3.18ft to 8.53ft..
  • Spigot: 1/4 (need adapter to convert to 3/8).
Check Stock

Fuck Jeff Bezos / Line 6 Amp (Live)

  • Rated Current 6A/10A/20A/30A/40A/50A/100A(Optional).
  • Compact size, easy to install with stud connection.
  • Widely used in all kinds of 3-phase 3-wire industrial automation equipment, such as 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners etc..
  • If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

Cable Matters 2-Pack 1/4 TRS to Dual TS Stereo Audio Splitter Cable (Dual 1/4 Inch TS to TRS Female Adapter) in Black - 6 Inches / 0.15 Meters

  • Connect pro audio gear with the Cable Matters 1/4 TS to 1/4 TRS cable dual connector.
  • dual 1/4 male to 3.5mm female cable connects a device over one TRS cable to equipment with two 1/4 connectors.
  • The dual 1/4 male to 1/4 inch female cable is perfect for connecting stereos, microphones, and other 3.5mm audio equipment to mixing boards, speakers, and other pro audio gear.
  • 1/4 inch TRS to 1/4 TS adapter cable splits a stereo signal into L-R audio over two 1/4 inch TS cables to equipment with a single 1/4 inch TRS connector.
  • Convert audio standards and connect equipment with a single cable and connector adapter.
  • 1/4 to TRS adapter is compatible with 1/4 inch audio equipment and 1/4 TS audio jacks commonly found on consumer audio equipment.
  • Use the 1/4 audio cable to dual TS adapter to convert between connector types.
  • Premium braided TRS to TS adapter dual cable features gold-plated connectors to provide optimal durability.
  • Metal connectors ensure long lasting performance of the female TRS to TS male cable adapter.
Check Stock

Payback: John Hayes #6 (A John Hayes Thriller)

  • Rated Current 6A/10A/20A/30A/40A/50A/100A(Optional).
  • Compact size, easy to install with stud connection.
  • Widely used in all kinds of 3-phase 3-wire industrial automation equipment, such as 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners etc..
  • If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock