Reviews Indoor Safety Gates Hardware Mounted

Baby Gate Extender Extention-4 Pack Baby and Pet Safety Stair Gate Threaded Spindle Rods Replacement Parts Bundle with Wall Protector (Round-White-4 Pack)

  • Gate Extender - 4 Pack 8MM Baby Gate Threaded Spindle Rod, Extra Longer 12CM (4.8 Inches) Replacement Hardware Parts Kit for Pet & Dog Pressure Mounted Safety Gates - Extra Long Wall Mounting Accessories Screws Rods Adapter Bolts..
  • Wall Protective - The wall protection Guard pads designed to protect your walls, doors and stairways when baby or pet gates are mounted. The wall Cups for baby gate spread the pressure from the baby gate over a much larger surface area .The rubber grip wall Cups pads stick to the walls to keep the gate from sliding and also making the gates safer without creating holes or leaving marks on the wall..
  • Easy to Use:Easy and fast installation, no tools or screws required. Apply the wall guard pads in the spot where your spindle rod bumper pad would go. Use on top spindles only, not needed on doorways with doors installed..
  • Wide Application - Suitable for most safety gates and most banisters. Great for baby gates, pet gates, stair gate,child gate,wooden stair gate,etc. Meet your multiple needs..
  • High Quality - Our threaded spindle rods with steel....
Check Stock

Safety 1st Ready to Install Baby Gate (White)

  • HARDWARE MOUNTED - Comes fully assembled for a hassle-free install to provide maximum security at top of stairs. Also can be used in doorways and other areas where you want extra security as a hardware mounted gate..
  • TEMPLATE INSTALL - No measuring, marking or need to level. The gate comes out of the box in one piece to ensure your install will be easier than other hardware mounted gates..
  • NO DRILL - No drill required for drywall installation. Gate includes special drywall screws, so no anchors needed..
  • NO TRIPPING - The no threshold design means no trip hazard at the top of the stairs..
  • ONE HAND OPEN - One-hand operation and a swing-open door make it easier to pass through, and the gate closes with just a push, letting you get on your way quickly..
  • MEASUREMENTS - This safety gate is 30 inches high and can be adjusted to fit spaces 29 inches to 42 inches wide..
  • NOTE - Requires a flat mounting surface at least 3.5" wide..
  • NOTE: This product can be installed as hardware mounted (requires drilling holes).
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

110 Inch Retractable Baby Gates Extra Wide Retractable Dog Gate for The House Extra Long Pet Gate for Dogs Indoor Outdoor Extra Wide Baby Gates for Large Openings Extra Large Baby Gate Child Gates

  • ...t under the retractable baby gates slide up and down to fit any baseboard..
  • Standard Approved : all mesh dog gate lines are tested to the safety standards, meeting or exceeding both ASTM or EM standards.We provide lifelong technical consultation and customer service. NOTE:This extra wide pet gate can be installed as hardware mounted (requires drilling holes)..
Check Stock

Baby Gate VMAISI Extender Extension - 4 Pack Gate Threaded Spindle Rods Replacement Parts Bundle with Wall Protector for Pressure Mounted Safety Gates for Pet & Dog

  • 4.8 Inches Spindle Rods Parts + Baby Gate Extension extends 1.1 to 3.5 inches for Pressure Mounted Safety Gates.
  • Baby Gate VMAISI Extender Extension - 4 Pack Gate Threaded Spindle Rods Replacement Parts Bundle with Wall Protector for Pressure Mounted Safety Gates for Pet & Dog.
  • 【STABLE AND NON-SLIP】Baby Gate Wall Guard Make your Baby gates More Stable and do not failing over. Protection: Protect your walls, no Holes, fit with your baby gates, pet gates, dog gates.
  • 【WALL DAMAGE-FREE】Baby Gate Wall Cups Protector: Wall protection Guard pads is distributed over a larger area. They designed to protect your walls, doors and stairways when baby or pet gates are mounted. Best replacement parts.
  • Baby Gate Extender Kit Extra Long - Black Bundle Items.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

EZ-Fit Baby Gate Walk Thru Adapter Kit for Stairs + Child and Pet Safety - Protect Banisters + Walls Single Pack 36 Inch

  • Note that gate pictured is NOT included. Only (1) one adapter is included..
  • Great way to protect your child or pet without damaging banisters or rails - Suitable for top and bottom stairs.
  • EASY to install - Works will all kinds of safety gates. You can also travel with the EZ-Fit safety gate.
  • Compatible with virtually ANY stairway post, works with hardware or pressure mounted gates. Maximum circumference is 18" around..
Check Stock

EasyBaby Products Indoor Outdoor Retractable Baby Gate, 33\ Tall, Extends up to 55\ Wide, Grey

  • Indoor and Outdoor: Can be installed at top and bottom of stairways, doorways, hallways, indoor and outdoor use. includes components for easy installation: stainless steel screws, catch mounts, wall spacers and installation guide templates. must be fitted between rigid surfaces such as plasterboard, timber or hardwall.This retractable gate is hardware mounted gate, Drill a 2.5mm pilot hole for timber surface and for hardwall drill a 5mm hole for installation..
  • Product Size: This Retractable Gate Fits openings up to 55" wide and is 33" tall. can be adjusted to fit your openings according to your needs. Mesh can be completely retracted away when not in use..
  • One Handed Operation to Open and Close: Push and turn clockwise to unlock gate, grasp handle to pull and hook handle onto catches, push and turn counter-clockwise to lock gate..
  • Fits Your Purpose: Perfect solution for doorways and stairs locking the way for babies and pets needed to provide safety and security in the whole house. The stair gates is used for children and pets blocking off their way out or in..
  • Standard Approved: All gate lines are tested to the safety standards, meeting or exceeding both ASTM or EN standards..
Check Stock

EasyBaby Products Indoor Outdoor Retractable Baby Gate, 34'' Tall, Extends up to 55' Wide, with Elegant Aluminum Casing, White

  • Indoor and Outdoor: Can be installed at top and bottom of stairways, doorways, hallways, indoor and outdoor use. includes components for easy installation: stainless steel screws, catch mounts, wall spacers and installation guide templates. must be fitted between rigid surfaces such as plasterboard, timber or hardwall.This retractable gate is hardware mounted gate, Drill a 2.5mm pilot hole for timber surface and for hardwall drill a 5mm hole for installation..
  • Product Size: This Retractable Gate Fits openings up to 55″ wide and is 34″ tall. can be adjusted to fit your openings according to your needs. Mesh can be completely retracted away when not in use..
  • One Handed Operation to Open and Close: Push and turn clockwise to unlock gate, grasp handle to pull and hook handle onto catches, push and turn counter-clockwise to lock gate..
  • Fits Your Purpose: Perfect solution for doorways and stairs locking the way for babies and pets needed to provide safety and security in the whole house. The stair gates is used for children and pets blocking off their way out or in..
  • Standard Approved: All gate lines are tested to the safety standards, meeting or exceeding both ASTM or EN standards..
Check Stock

Safety 1st Easy Install Metal Baby Gate with Pressure Mount Fastening (White)

  • CUSTOMIZABLE WIDTH – This safety gate adjusts to fit doorways and openings between 29 and 38 inches wide and is 28 inches high.
  • KEEP IT SECURE – All pressure-mounted gates need to be occasionally tightened, but this safety gate lets you know when. If the easy-read indicator turns red, it’s time to re-adjust.
  • SIMPLE ONE HAND RELEASE – Adults can easily open using one hand, while the two-action handle remains tough for little fingers to release and open.
  • EASY TO INSTALL – This pressure-mounted gate requires no hardware or tools to install and sets up easily in doorways and other pass through areas.
Check Stock

4 Pack Pressure Gates Threaded Spindle Rods M8 (8 mm), Baby Gates Accessory Screw Bolts Kit Fit for All Pressure Mounted Walk Thru Gates (8mm 4 Pack)

  • 4 Pack M8 Baby Gate Spindle Rods 8mm Extra Longer 12CM (4.8 inches) Threaded Spindle Rods Fit most Pressure Mounted Baby Gates.
  • EASY TO INSTALL -VMAISI 8 MM Diameter Mounted Bolts Kit can be easily to install into your Baby Gates,NO TOOLS NEEDED.
  • Stable: Make your Baby gates More Stable and do not failing over. Protection: Protect your walls, no Holes, fit with your baby gates, pet gates, dog gates.
  • Extra Longer 12CM M8 Spindle Rods Fit for most pressure Gates, including baby gates, pet gates, Walk through Extra Wide, Tall Safety Children Proof Gates With Door.
  • White Spindle Rods for Baby Gate Replacement Parts.
Check Stock

KidCo Univeral Gate Installation Kit (2 Count) - No Drill Banister Gate Mounting Kit for Stair Safety Gates, Baby Gate Banister Adapter for All KidCo Gates - Retractable, Pressure, & Hardware Mounted

  • One kit is required for each side of the gate that is being mounted to a banister.
  • and only the most basic tools are needed to assemble any good child safety gate..
  • For use at the top or bottom of stairs with hardware or pressure mount gates..
  • The hardware is designed to fit square posts 2 1/2″ – 3 5/8″ wide or use the included insert for round post installation..
  • Manufactured with precision, robotic welding and form fitting.
  • Our designers and engineers are well versed in world-wide safety standards, applying only those most stringent to KidCo gates (thereby meeting and exceeding voluntary U.S. standards). We seek out top quality raw materials like virgin steel, re-enforced resin and certified non-toxic paint to offer a finished product that provides long life. We have on-site factory inspections, making sure that all products are being manufactured in a safe environment..
Check Stock

Vmaisi Baby Gate Wall Cup Protector Make Pressure Mounted Safety Gates More Stable - Wall Damage-Free - Fit for Doorway, Door Frame, Baseboard - Work on Dog & Pet Gates (White)

  • 【4 Pack Wall Cup Protector 】VMAISI Upgraded Baby Gate Wall cup Protector Make your Pressure mounted safety gates More Stable, Secure and do not failing over. Saver for Wall Surface Protection.apply the wall cup Protector pads in the spot where your spindle rod bumper pad replacement parts.
  • 【Baby Gates Wall Pads Guard Fit Doorway, Baseboard.】 They designed to protect your walls, doors and stairways when baby or pet gates are mounted. The wall Cups for baby gate spread the pressure from the baby gate over a much larger surface area (10 time than original bolts from gates). The rubber grip wall Cups pads stick to the walls to keep the gate from sliding. So that you can tighten the bolts more and making the gates safer without creating holes or leaving marks on the wall..
  • 【Wall Cups Diameter】2" x 3.15 " Can fit small space and baseboard, doorway etc.., Package only 4 pack wall cups. Spindle rods (screws) are not included..
  • 【Fit for all Pressure Gates】Not included Spindle Rods, Wall extender cup Protector for baby gates, pet gates, Dog door gates, Walk through Extra Wide, Tall Safety Children Proof Gates With Door.
  • [ Rectangular Wall Cups ] These are usually about 2" x 3.15". They put slightly more pressure on your walls than the lar....
Check Stock