Reviews Indexable Slotting Cutters

BOSCH 82808 1/4-Inch Shank Arbor with Ball Bearing for Slotting Cutters

  • Arbor Diameter: 1/4-Inch, Bearing Diameter: 5/8-Inch, Length: 1-29/30-Inch, Shank Diameter: 1/4-Inch.
Check Stock

Bosch 82810 1/4-Inch Shank Arbor with Ball Bearing for Slotting Cutters

  • Arbor Diameter: 5/16-Inch, Bearing Diameter: 7/8-Inch, Length: 2-5/8-Inch, Shank Diameter: 1/4-Inch.
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

Whiteside 6700A Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing by Whiteside

  • Whiteside Slotting Cutter 6700A: 5/16"B, 0.062"CL, 3-WING.
  • Slotting cutters create a small slot in your project for various uses..
  • Made from solid alloy steel and micro-grain carbide..
  • Precision ground for proper balance at high RPM..
  • 6700A Whiteside Carbide Tipped Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing.
Check Stock

WEN CH4704 18.5-Inch Indexable Wood Turning Chisel with Four Carbide Cutter Tips

  • Always sharp: indexable 6-inch gouge bar allows for easy tip installation and changes.
  • Includes four different shapes of carbide cutter tips: round, square, diamond, and arc.
  • Form-fitted 12-inch wooden handle crafted from durable African coralwood.
  • Easily replace a dull chisel tip with a set of WEN CH016R Indexable Cutters.
  • The perfect woodworking accessory for the WEN Wood Lathe Series.
Check Stock

Freud 60-120 Slotting Cutter Arbor with 1/4 shank carbide height

  • Specs: Arbor Dia. 5/16", Arbor Height 25/64", Bore Dia. 2-3/8", Shank Dia. 1/4", Stud Height 1".
  • The perfect complement to Freud's Slotting Cutters.
  • Compatible with any slotting cutter with a 5/16" bore.
  • Use in hand-held or table-mounted routers.
Check Stock

Freud 60-122 Slotting Cutter Arbor

  • Specs: Arbor Dia. 5/16", Arbor Height 25/64", Bore Dia. 2-3/8", Shank Dia. 1/2", Stud Height 1".
  • The perfect complement to Freud's Slotting Cutters.
  • Compatible with any slotting cutter with a 5/16" bore.
  • Use in hand-held or table-mounted routers.
Check Stock

Freud 60-102 Slotting Cutter Arbor with 1/2 Shank

  • Specs: Arbor Dia. 5/16", Arbor Height 25/64", Bore Dia. 2-3/8", Shank Dia. 1/2", Stud Height 1".
  • The perfect complement to Freud's Slotting Cutters.
  • Compatible with any slotting cutter with a 5/16" bore.
  • Use in hand-held or table-mounted routers.
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check Stock

GBJ Face Mill Milling Holder End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 with BT40 FMB22-45L Shank Face Mill Arbor BAP400R 50-22-4T 50mm/1.96\ (Milling Cutter+10 Inserts+Arbor)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BT40-FMB22-45L +1× BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

BOSCH 92813C 5/16 In Arbor for Slotting Cutters

  • Compatible with cutters 85526M, 85527M, 85528M, 88829M, and 92837.
  • Recommended for use with a routing guide.
  • May be used with router table for production work.
Check Stock

Indexable Carbide Insert Knife 14.3x14.3x2.0mm-50° 2-Edge Replacement Cutter for Cutech Tool Rikon Carbatec and Most Planer Jointer Helical Cutterheads, 10 Packs

  • Standard Cutter Size: 14.3mm square with straight corners 2mm thick,2 indexable cutting edges, 50 degree cutting bevel. Inserts are used on planers/jointers with helical cutterheads..
  • Made of Premium K10 grade solid tungsten carbide, double life-time than general carbide cutters, and had been increased 30% hardness by our high temperature quenching..
  • Each cutter has 2 indexable sharp edges, if one is dull, no more sharpening, just turn to another edge which greatly reduces you down time. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely..
  • The inserts had been high precision polished, which increased the oxidation resistance and corrosion resistance of the cutter, combined with optimal grinding process to produce the flattest and truest cutting surfaces..
  • What You Get: Pack of 10 14.3 x 14.3 x 2mm square straight replacement carbide cutters, 10 pcs of professional M6 screws, our worry-free 12-month warranty, and friendly customer service. TJATSE committed to give Best Selection for your woodworking job..
Check Stock