Reviews Incorporates Brake And Turn Signals

Blue Ox BX88206 Coiled Cable with Female Receptor

  • The Trailer conversion connection wire functions as a converter tool which fit all 2-wire vehicle electrical system to standard 3-wire trailer RV hitch pick up trucks. 2.1 amps signal circuit, 5.0 amps taillight circuit..
  • Our trailer tailight conventer model converts 2-wire system ( left and right turn/brake) to a 3 wire system (left and right turn, brake seperate) also fit some 4 wire to 5 wire trailer light system that allow to split brake and turn signals on pick up trucks into separate wires..
  • Noted: tailgate light/tail light function is not support in this converter so does not run though this converter. Truck can't tell the difference between blinker and brake light. Once you separate both of two, Since it reads AND signals, your additional blinkers won't flash with the hazard lights, but your brake lights will..
  • Easy install by yourself. Standard color code wire connection. Functions was mark on the converters for help you install simultaneously. The best is use a multimeter to ensure the input and output Voltage..
  • The trailer converter is a great tool for trailer to Splice turn signal / brake light ..
Check Stock

PBYMT 1157 LED Turn Signal Light,Front Rear Running Brake Light, 2\ Smoke Lens Cover, Compatible for Harley Davidson Sportster Softail Touring Electra Street Glide Road King 1997-2022

  • ▶FITMENT - Aftermarket front rear turn signal light kit compatible for Harley 1986-2020 models which with 2 inches standard bullet style turn signal lights and 1157 socket.*Does NOT fit 3-1/4” flat style turn signals or 1156 socket.Plug and play on most models.The turn signals may flash faster than normal on 2010-older Softails,2011-older Dynas,2013-older Sporsters,and 2013-older Touring and Tri-Glide models. If a slower flash rate is desired,the load resistor is required..
  • ▶NEW DESIGN LED TURN SIGNAL LIGHT - The LED turn signals feature raw LEDs without lenses giving the benefit of more light output. Each 1157 bulb is brighter 150% than traditional halogen bulb,you can switch turn signal and running light anytime.The front turn signal bulbs are switchback model, outer white ring for running light and center amber for front turn signal.
  • the red rear turn signal bulbs integrated tail light with brake light and turn signals function..
  • ▶VARIOUS APPLICATION - The front turn signal bulbs are switchback model, outer white ring for running light and center amber for front turn signal.
  • ▶SMOKE LENS COVERS - Made of high quality PC plastic,mounted on the turn....
Check Stock

NTHREEAUTO Sequential Turn Signals Light LED Switchback Flowing Motorcycle Blinkers Universal Bullet Indicators Compatible with Harley Honda Kawasaki Yamaha Suzuki Off-road

  • 【Compatibility】Universal mini sequential led turn signals fit all 12V motorbikes, such as compatible with Street Bike,Cruiser, Adventure Touring, Dirt Bike, Harley, Honda, Kawasaki, Yamaha. Easy to install and wiring, bolt mounting.
  • 【4X Brighter Than Factory Light】NTHREEAUTO mini motorcycle turn signal, equipped with high power led chips, energy saving is superior to traditional lights, with high brightness, low heat generation, high efficiency, 4x brighter than factory light, greatly increased your visibility at night, foggy and rainy days or any extremely weather, providing the safety driving..
  • 【5X Longer Lifespan】Made of processed with ultrasonic treatment housing and ABS Plastic bottom shell, impact resistance, heat and low temperature resistance, protect led chips from water or dirt damage without weakening light.
  • Flexible handle protects turn signal light from accidental collision damage. Built in SMD led chips, lower power consumption, 99% reduce burning bulbs, extended service life..
  • 【Multifunction Switchback Mode】This Off-road Indicators can be used as front / rear turn signals or daytime running lights and brake light. Outer se....
Check Stock

QUASCO LED Brake Tail Light with Turn Signals Motorcycle Taillight Compatible with Honda Grom MSX125 CB650F CB650R CBR650F CTX700N, Smoked Lens

  • ...CT, 2018 CTX700N DCT ABS, 2018 CB650F.
  • 【Super Bright:】built-in high power leds, brighter than incandescent bulb. Super bright light output makes you more noticeable when driving to increase safety. Function as running / tail light, brake light, right & left turn signal light. Please install flasher relay if turn signals not work.
  • 【Sequential Turn Signals & Waterproof Construction:】The amber turn signal lights illuminate from central to outer side sequentially, which greatly improves the appearance of your motorbike and makes your motorcycle different from others. Besides, the tail light is well-sealed on the edge, effectively keep water out of housing, stay illuminated in rainy days.
  • 【Easy Installation:】Just splice wire into existing wire harness. 5-wire configuration, red wire for brake light, blue wire for tail / running light, two yellow wires separately for right and left turn signals, black wire for negative. Please install the LED flasher relay (included in package), if turn signal light do not light up.
  • 【Package Including:】1Pc smoked led motorcycle taillight with turn signals, worry-free 180 days manufacture warranty, and friendly customer service.
Check Stock

SPI, SM-01504, LED Taillight Assembly compatible with many 2009-2020 Arctic Cat Snowmobiles Replaces OEM #'s 0609-855 & 0609-863

  • 【Compatibility】The tail light is universal, it can fit most of motorcycles, scooters and bikes etc, such as for Harley, Yamaha, Honda gold wing, dirt bike, Kawasaki Suzuki and Triumph etc..
  • 【ALL-IN-ONE Functions】Designed with 5 wires, it can be used as tail light, license plate light, brake light, left turn signals and right turn signals. Easy installation, easy wiring, black wire for negative, blue wire for tail light and license plate light, red wire for brake light, and yellow wires for left turn signals, brown wire for right turn signals..
  • 【3X Brighter Than Halogen Bulbs】Built in SMD led chips, 3x brighter than halogen bulbs, providing good visibility, make your driving safer..
  • 【Well Constructed】Made of high quality ABS plastic material, anti-scratch, no faded with long time usage, waterproof, smooth and transparent surface, smoked lens cover, add new features to your motorcycle and maintain clear visibility without weakening the led light even at rainy days..
  • 【What You Will Get】Including 1pcs universal tail light. You are backed by 3-Month warranty since order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once detail is confirmed..
Check Stock

NTHREEAUTO 4PCS Sequential LED Motorcycle Turn Signals Front Rear Mini Blinkers Brake Light Indicators Compatible with Honda Shadow Kawasaki Vulcan Yamaha Suzuki Bobber Cruiser Chopper

  • 【Compatibility】Universal mini led turn signals fit all 12V motorbikes, such as compatible with Street Bike, Cruiser, Adventure Touring, Dirt Bike, Harley, Honda, Kawasaki, Yamaha, Suzuki and other motorcycles. You are backed by 3-Month warranty since the order purchase date..
  • 【Brake & Turn Signal Combo Light Kit】Multifunction switchback & sequential mode, stylish, nice and attractive, add features to your motorcycle. Front: Outer flowing amber for signal, white for running lights, center red for brake light.
  • When the brake light is on, the outer white halo ring will on at same time. Rear: center amber for signal, outer red halo ring will turn off while turn signal is on..
  • 【4X Brighter Than Factory Light】NTHREEAUTO mini motorcycle blinkers, built in high power SMD led chips, energy saving is superior to traditional lights, with high brightness, low heat generation, lower power consumption, extended service life, greatly increased your visibility at night, foggy and rainy days or any extremely weather, providing the safety driving..
  • 【5X Longer Lifespan】Motorcycle turn signal lights processed with ultrasonic treatment housing and ABS Plastic bottom shell, impact resistance, heat and low temperature resistance, protect led chips from water o....
Check Stock

Eagle Lights HALOZ Layback LED Tail Light with Turn Signals for Harley Davidson Motorcycles

  • SUPER BRIGHT LED TAIL LIGHT - Made to replace the stock rear tail lamp on 1999 and newer Harley Davidson motorcycles. Easy pop-in replacement. Includes built in turn signals..
  • SMOOTH LIGHT, SHARP BIKE - The light from this brake light is sharp, fully-diffused and bright. The unique diffuser on the turn signal and brake light hides the individual LEDs while allowing the light to pass through..
  • READY TO ROCK - The LED tail light is ready to be installed right out of the box. The harness from the light plugs directly into your Harley Davidson motorcycle's harness. It features and includes running light, license plate light, brake light and turn signals. Installation instructions included..
  • DIRECT REPLACEMENT - Designed to directly replace the stock rear tail lamp on many HD motorcycles. Fits all 1999 or newer Harley Davidson models equipped with an OEM tail light..
  • EAGLE LIGHTS LIFETIME WARRANTY - Our LED brake lights are designed to outlast your bike! But should something go wrong, you are covered by the Eagle Lights Lifetime Manufacturer Warranty. The best warranty in the ....
Check Stock

QUASCO Chopped Fender Edge Light, Led Motorcycle Brake Tail Light with Turn Signals Compatible with Harley Sportster Iron 883 XL1200C XL1200L XL1200N XL1200R XL1200V XL1200X

  • Compatibility: Compatible with Harley FLHTC Electra Glide Classic 2009-2013, FLHTCU Electra Glide Ultra Classic 2009-2016, FLHTCUL Electra Glide Ultra Classic Low 2016, FLHTK Electra Glide Ultra Limited 2010-2014, FLHTK Ultra Limited 2015-2016, FLHTKL Ultra Limited Low 2016, FLTRU Road Glide Ultra 2011-2013, FLTRU Road Glide Ultra 2016.
  • Super Bright and 3 in 1 Design: built in high power SMD leds, brighter than incandescent bulb, super bright light output makes you more noticeable when driving to increase safety, the rear fender edge light can function as tail light, brake light and turn signal light.
  • Waterproof: Made of high quality ABS plastic, well-sealed on the edge, water tight, effectively keep water out of housing, stay illuminated in rainy days. Best replacement for old fender taillight.
  • Easy Installation: Just splice wire into existing wire harness. 5-wire configuration, red wire for brake light, yellow wire for running light / taillight, blue wire for left turn signals, orange wire for right turn signals, and black wire for negative.
  • Package Including:1 Pcs smoked led fender edge brake tail light integrated turn signals, worry-free 180 days manufacture warranty, and friendly customer service.
Check Stock

[Upgraded Remote] Onvian Smart Bike Tail Light with Turn Signals Bike Alarm with Wireless Control Remote USB Rechargeable Rear Bike Light IP65 Waterproof Auto ON/Off Bicycle Lights for Night Riding

  • MORE IN ONE SMART BIKE TAIL LIGHT WITH TURN SIGNALS: Multi-function anti-theft bike alarm tail lights. Feature with brake light /turn signal/warning....
  • ULTRA-BRIGHT BICYCLE LIGHT WITH 6 LIGHT MODES: Built-in 31 high lumen COB LEDs inside to bring the brightness of the bicycle taillight to reach 160....
  • LEFT/RIGHT TURN SIGNAL FUNCTION: Turn on right/left turn signals through the wireless remote control and get drivers' attention from several blocks....
  • SMART BRAKE SENSING TAILLIGHT: Designed with the smart brake sensor, bike light will auto highlight for 2s after braking to alert other drivers behind....
  • INTELLIGENT AUTO ON/OFF: "Slowing Flashing" and "Breathing" modes are intelligent auto modes, the bike alarm taillight will light up for the 30s and....
Check Stock

DMP Kawasaki Ninja 400 Z400 ZX6R ZX6 2018 2019 2020 Smoked Integrated LED Tail Light - 905-4159D

  • Each DMP Tail Light comes with an OEM factory style Brake Light harness connector, as well as optional wires (without connectors) for the turn signals..
  • Turn Signals ground through the common ground in OEM Brake Light connector, leaving only a single power wire for each side to be hooked up if signals are to be used. (Reference installation instructions)..
  • Formed to perfectly replicate OEM dimensions and are constructed with high quality polycarbonate for correct optical clarity. You will not find a better fitting or brighter aftermarket LED Tail Light..
  • The DMP LED Tail Lights provide the perfect solution for streamlining the appearance of your motorcycle by eliminating bulky turn signal housings, without sacrificing function..
  • Each LED board hosts a matrix of super high intensity LEDs that provide intense luminescence and excellent visibility in a variety of conditions. The interior of the tail light housing contains a topographically designed reflective surface to further amplify the intensity of the LEDs and increase overall visibility..
Check Stock

Xotic Tech Smoked Lens Trailer Hitch Cover w/Trailer Adapter Hitch Pin Red Square Brake Tail Light Compatible with Truck SUV 2'' Towing Hitch Receiver, Pure Red 15-SMD (Size:3.25" x 4.33")

  • ...t and brighter brake light modes,much longer wiring,make it easy to install. Comes with a hitch pin with lock and foam lining to ensure a snug fit.
  • 【Features】Special IC built in to ensure the tow hitch mounted LED tail/brake light doesn't flash when only your turn signals are on. If both your brake lights and turn signal lights are active, the hitch mount LED brake light will flash along with your turn signals to add another turning/merging blinker..
Check Stock

Eagle Lights Generation II Midnight Edition 2 Inch LED Turn Signals with White Running Lights (Front (1157) and Rear (1157) for Harley Davidson Motorcycles

  • MIDNIGHT EDITION - Get the smoked look with the Midnight Edition LED turn signals. They look great with either clear or smoked lenses for maximum effect. Each Midnight Edition turn signal features 48 LEDs of bright, highly visible light.
  • keeping you safer on the road! The perfect addition to help you see what you’ve been missing! Plug and play, just like changing a light bulb!.
  • ULTRA-BRIGHT RUNNING LIGHTS - Transform your dull turn signals into super bright white running lights! All 48 LEDs turn from a bright white running light to amber turn signals. The running lights will light up the sides of the road like never before. You will be able to see farther, be seen from farther away and stay safer on the road with our Midnight Edition Generation II LED Turn Signals. Never Go Dark with Eagle Lights..
  • WHICH LED TURN SIGNAL KIT DO I NEED? Harley Davidson motorcycles come with one of two styles of rear LED turn signals, 1156 Single Contact and 1157 Double Contact. If you do NOT have a center rear tail light, you will need this kit. It has 1157 rears that function as turn signals, running light and brake light. If you have a rear center tail light, you will need our 1156 turn signal kit..
  • EAGLE LIGHTS LIFETIME WARRANTY - Our turn signals are designed to out....
Check Stock

Custom Dynamics LED Board For Original Tombstone Taillight GEN-56 1157

  • For Harley-Davidson 1997-2012 Dressers, 99-03 Sportsters, 97-11 Dynas, and 96-10 Softails.
  • Converts rear turn signals to run-brake-turn. Works with LEDs or incandescent bulbs.
  • Ten user-selectable built-in Brake light strobe/flash patterns (user can also select no strobe/flash on Brake).
  • Ten user-selectable running light intensities allow user to match the running light brightness of turns to center taillight.
  • Ability to apply Brake strobe/flash patterns on center taillight only, rear turns only, or rear turns and center taillight.
Check Stock