Reviews Inch Size Bottom Tap

5 Pieces Faucet Aerator - Insert Water Tap Aerators Faucet Flow Restrictor Replacement Parts for Bathroom or Kitchen, 1.2GPM，16.5mm/0.65Inch

  • HIGH QUALITY MATERIALS : The faucet aerator is made of ABS plastic, which is durable and easy to install. The fine filter screen has a good filtering effect and can maintain a stable and constant water flow without splashing..
  • SIZE : The top outer diameter is 16.5 mm / 0.64 inch, the bottom outer diameter is 14 mm / 0.55 inch, standard size..
  • FUNCTION : Reduce the impact of water, and prevent water splashing by generating a lot of bubbles, the filter inside can filter out most impurities..
  • APPLICATION : Water tap filter aerator is suitable for installation and replacement of tap accessories in homes, hotels, public places and other places..
  • PACKAGE INCLUDING : The package contains 5 pieces of faucet aerators and 5 pieces aerator wrench, which are enough to meet your different needs, such as the use and replacement of faucet accessories for homes, hotels, and public facilities. Before buying this aerator, please measure the size of the tap..
Check Stock

2 Pcs Stainless Steel Kitchen Sink Tap Hole Cover ，Kitchen Faucet Hole Cover ，Faucet Hole Cover，Sink Tap Hole Cover，Kitchen Faucet Hole Cover Stainless Steel (1.2 to 1.6 Inch in Diameter)

  • Material: Sink Tap Hole Coveris made of durable stainless steel and plastic,to prevent rusting ​and will not fade ，Can be used for a long time。.
  • Applicable size： Kitchen Faucet Hole Cover for holes between 1.2 to 1.6 inch. The thickness of the sink should be less than 0.4 inch. (This is not long enough for granite counter tops) Most household Kitchen Sink Hole Cover are standard sizes.please check its size before buying..
  • Easy to install：Kiut the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw,It covers the spray hole, no need tools, Kitchen Sink Tap Hole Plate Stopper Cover ​is equipped ​with a rubber gasket to achieve a good seal and avoid leakage..
  • Stainless Steel Kitchen Sink Tap Hole Cover device is decoration and leakage prevention,preventing water from leaking onto the floor,keep the kitchen clean and tidy.Kitchen Sink Tap Hole Plate Stopper Cover very small, which convenient to store and don not take too much space..
  • We believe that our Premium Sink Tap Hole Cover，will exceed your expectations. If you have questions, please contact us any time. We will try our best to solve your problems..
Check Stock

40 Pieces Faucet Aerator Flow Restrictor Insert Faucet Aerators Replacement Parts for Bathroom or Kitchen, Red(2.2 GPM) and Green(1.5 GPM)

  • Package includes: 40 pieces tap aerator inserts in 2 colors: 20 pieces red(2.2 GPM MAX) and 20 pieces green(1.5 GPM MAX).
  • Material: the faucet aerator is made of ABS plastic, durable and easy to use.
  • Faucet tap aerator size: the outer diameter of the top is 21 mm/ 0.83 inch, that of the bottom is 19 mm/ 0.74 inch, standard size.
  • Function: ease the impact of water, and prevent water from splashing by generating lots of bubbles.
  • the strainer inside can filter out most impurities.
  • Applications: the faucet filter aerator is suitable for the installation and replacement of faucet fittings at homes, hotels, public facilities and other places.
Check Stock

6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC（Golden）

  • Complete Set: Set of 6 pcs drill bit tool, 6 different size tap drill bit, M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch, a variety of specifications to choose from, convenient for work..
  • 3-in-1 Combination Tap: Drilling - tapping - chamfering, three-in-one composite tap with hexagonal handle can be achieved in one step without frequent replacement, and the operation is more convenient and faster, high processing efficiency..
  • Professional Tools: The standard 1/4 inch hex shank can be installed on ordinary electric drills and bench drills, with strong locking force and not easy to slip. The pointed tap can be tapped to the bottom of the blind hole, large helix angle, better chip removal performance.
  • Premium Material: Our tapping bits are made of high-speed steel with titanium coating. They have high hardness, sharpness and wear resistance, high heat resistance and strong cutting performance. They are a good helper for cutting high-hardness materials..
  • Widely Application: Our tap drill bits have strong cutting toughness, suitable for various cutting series, processing range: copper, aluminum, brass, iron plate, steel, metal sheet, plastic and other metals..
Check Stock

Thread Forming Tap Bttm 1/4-20 Uncoated

  • Price For: Each Tap Dimension Type: Inch Tap Style: Thread Forming Number of Pieces: 1 Thread Direction: Right Hand Tap Finish: Uncoated Item: Tap Number of Flutes: 0 Standards: ANSI Tap Grouping: Tap List Number: 5502 Shank Dia.: 0.255" Thread Length: 5/8" Overall Length: 2-1/2" Tap Thread Size: 1/4"-20 Tap Thread Type: UNC.
  • Tap Material: Vanadium High Speed Steel Tap Chamfer: Bottoming Pitch Diameter Limit: H4 Country of Origin (subject to change): United States.
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
  • Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
  • Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
  • Measure your plug diameter, thread, and pitch to see if this kit is compatible.
  • PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.
Check Stock

uxcell Adjustable Tap Wrench Handle for 1/16\-1/4\ (UNC/UNF) / M1-M8 Taps, Tap Reamer Tapping Wrench Hand Tool with Plastic Dipped Handle

  • Tap Wrench Size: Fit tap size: 1/16"-1/4" (UNC/UNF) / M1-M8 (Metric). Black oxide coating for good abrasion resistance and rust protection. Hardened carbon steel sliding block for high hardness and strength..
  • Wide Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
  • Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially suitable for larger-diameter taps..
  • Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread. Plastic dipped handle provides firm and comfortable grip in use when exposed to fluid or moisture..
  • Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other..
Check Stock

BSP/BSPP British Standard Pipe Tap and Die Set - 18 Piece

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 18 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

Qjaiune 2pcs M14x1.5 Tap M14 Metric Thread Tap Right Hand Thread Tapping Tool HSS Thread Milling Taps M14 x 1.5 Taper & Plug Tap

  • ✿M14x1.5 Machine Tap: This mini thread tap has a standard size, which can machine threads on most metals, and can also be used to repair damaged or blocked threads..
  • ✿High Quality Material: Metric tap is made of high-quality high speed steel, with high hardness and strong wear resistance. It can be used on tapping machines, drilling machines and CNC lathes..
  • ✿Wide Range of Application: M14 x 1.5 tap has high hardness and can be used for thread processing on metal, iron, copper, aluminum alloy, stainless steel, zinc and other metal materials..
  • ✿Package Contains: 2 x M14x1.5 Metric Tap (Taper & Plug Tap), Thread Diameter: 14mm, Pitch: 1.5mm, Total Length: 2.91 Inch / 74mm, Working Length: 1.26 Inch / 32mm, Shank Diameter: 0.42 Inch / 10.6mm..
  • ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..
Check Stock

360 Degree Swivel Sink Faucet Aerator,2-FlowBig Angle Water Saving Dual Function,with Gasket Faucet Replacement Part - 55/64 Inch-27UNS Female Thread, 15/16 Inch-27UNS Male Thread Adapters (1)

  • BIG ANGLE SWIVEL：Solid Brass Made, 360-Degree Twist and Rotate Swiveling with Big Angle. Water sprayer can reach to every corner of the kitchen sink and makes it easy for washing and cleaning..
  • DUAL FUNCTION: 2 kinds of water flow design, the rotating bottom can switch between soft bubble flow and strong spray mode.
  • INCREASE PRESSURE: The Kitchen Aerator can increase the water pressure, water and air fully mixed to achieve a better cleaning effect, while saving 30% ~70% water compared with standard bubble.
  • APPLICATION：Can be fitted to Kitchen, Sink Faucets, Bathroom Taps and Lavatory Faucets.Make sure the diameter of your kitchen tap before order..
  • MEASURING INSTRUCTION: 55/64 Inch-27UNS Female Thread Aerator，Thread size: 55/64 Inch Adapt for 22mm diameter faucet with male thread. Make sure the diameter of your kitchen tap before order. 15/16 Inch-27UNS Male Threaded Adapter was included (If your faucet is female thread, use the adapter to connect)..
Check Stock

BSP BRITISH STANDARD PIPE BSPP PARALLEL TAP AND DIE SET - 8 SIZE 1/8 TO 1

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 24 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14, 7/8" - 14, 1" - 11 TPI.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

uxcell Adjustable Tap Wrench Handle, for Metric M1-M10 W1/16-3/8 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated

  • Tap Wrench: Fit tap size: M1-M10 (Mertic)/ 1/16" - 3/8"(UNC/UNF) / 1.5mm-10mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
  • Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
  • Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
  • Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
  • Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.
Check Stock

uxcell Adjustable Tap Wrench Handle, for Metric M1-M8 W1/16-1/4 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated, 2pcs

  • Tap Wrench: Fit tap size: M1-M8 (Mertic)/ 1/16" - 1/4"(UNC/UNF) / 2mm-9mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
  • Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
  • Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
  • Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
  • Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.
Check Stock