Reviews Inch Series Tapered Bearing

Bearing Kit for #84 Spindle

  • Trailer Bearing Repair Kit for 1-3/8 to 1-1/16 Inch Tapered #84 Spindle (3.5k capacity) - Includes E-Z Lube Cap with Plug 1 Set Included.
  • L-68149 inner bearing- (1-3/8" inside dimension) / L-44649 outer bearing- (1-1/16" inside dimension).
  • L-68111 inner race- (2.362" outside dimension) / L-44610 outer race- (1.98" outside dimension).
  • Grease seal - (2.56" O.D - 1.72" I.D) EZ Lube Dust cap - (1.98" outside dimension).
  • This kit is for axles with a 1-3/8" to 1-1/16" tapered #84 spindle..
Check Stock

Timken 19150 Differential Bearing

  • INNER DIAMETER 1.5 INCH X OUTER DIAMETER 2.687 INCH X WIDTH 0.625 INCH.
Check Stock

Spicer 5-460X U-Joint Kit 1310 to 1350 Series (OSR)

  • Spicer greaseable universal joint with snap rings.
  • Bearing Cap Diameter (1): 1.062 inches / Bearing Cap Diameter (2): 1.188 inches.
  • Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches.
  • Outside to outside dimension: 3.219 inch.
Check Stock

Spicer 5-134X U-Joint Kit 1310/1330 Series (OSR)

  • Spicer greaseable universal joint with snap rings.
  • Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches.
  • Outside to outside dimension: 3.219 inch.
Check Stock

Spicer 5-153X U-Joint - Individual

  • Spicer Life non-greaseable universal joint with snap rings.
  • Bearing Cap to Bearing Cap: 3.219 inches.
  • Outside to outside dimension: 3.219 inch.
Check Stock

NTN Bearing 30206 Tapered Roller Bearing Cone and Cup Set, Steel, 30 mm Bore, 62 mm OD, 17.25 mm Width

  • 30206 Bearing Size: Out Diameter:62mm/2.44 inch.
  • Ealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use.
  • Complete single tapered roller bearing assemblies are generally mounted in opposing pairs on a shaft to evenly distribute loads..
  • They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact. These features result in reduced noise and smooth operation..
  • Widely used in transmissions, span styleoil or greased, high radial and axial load, trailer and caravan axles, gearboxes and differentials, span..
Check Stock

Spicer 5-1350-1X U-Joint Kit 1350/SPL30 Series (OSR)

  • Spicer Life greaseable universal joint with snap rings.
  • Bearing Cap to Bearing Cap: 3.625 inches.
  • Outside to outside dimension: 3.625 inch.
Check Stock

OTC 6542 Bearing Cup Remover

  • OTC's 6542 Bearing Cup Remover tool is ideal for servicing hubs on today's popular front-wheel-drive small cars.
  • Tapered metal cone holds the jaws securely in place during pulling.
  • Perfect for pulling internal bearing cups, seals, bushings, etc..
  • Jaw spread is 15/16 inch to 3-1/4 inches and reach is 3-1/2 inches.
  • use with any 5/8-18 threaded slide hammer such as OTC's No. 1155 or 1156 as well as OTC's No. 927 Push-Puller.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Powerbuilt Alltrade 648649 Kit 21 Clutch Pilot SAE/MM Tool Set Silver

  • Made to be the most reliable tools in the market today.
  • Tool set for aligning clutch components when installing a new clutch.
  • Aligns clutch plate and disc to pilot bearing.
  • Includes tapered cone clutch plate adapter and centering shaft.
  • Adapters included: 1.18/0.984-Inch, 17/15mm, 15.8/12mm, 0.874/0.812-Inch, 0.787/0.749-Inch, 0.718/0.668-Inch, 0.624/0.614-Inch and 0.590/0.561-Inch.
  • Kit 21 includes 8-Piece for aligning clutch components when installing a new clutch.
Check Stock

uxcell T101/904A1 Thrust Tapered Roller Bearings 1.01\ Bore 2\ O.D. 0.625\ Width

  • Package Content : 1 x Tapered Roller Bearing.
Check Stock

Spicer 5-153X U-Joint Kit 1310 Series (OSR)

  • Spicer non-greaseable universal joint with snap rings.
Check Stock

Spicer 5-170X U-Joint Kit 1000 Series (ISR)

  • Spicer Life non-greaseable universal joint with snap rings.
Check Stock

MERIGLARE Stainless Steel Makeup Spatulas for Professional Beginner 161mm Long Facial Mixing Stick Silver Fine Workmanship Stylish Durable

  • Spatula with flat round and tapered end for transferring, lifting, and handling powders and grains.
  • Made of 400 series high mirror polish stainless steel.
Check Stock