Reviews In Line Water Pump

Aquatec 6800 Booster Pump Kit for up to 100 GPD home RO reverse osmosis water filter system Standard or Manifold, includes pump, pressure switch PSW-240, transformer, 6840-2J03-B224 B221 Made In USA

  • This pump kit includes Aquatec pump 6840-2J03-B224 with heavy duty steel base plate with damper, PSW-240 pressure switch, transformer 110V USA plug, 1/4″ inlet/outlet for pump and pressure switch, detail instruction.
  • This pump is designed to increase the water supply pressure to a RO water system. Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This pump is good for under 100 GPD (gallons per day) RO systems Most home drinking RO systems are under 100 GPD.
  • Automatic ON/OFF operation. The pressure switch would sense the pressure in the output line, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, the pump would shut off, and then when you start using water and tank pressure drops, then the pump turns back ON to replenish the tank..
  • This kit DOES NOT come with the optional (ESO) Electric-Shut-Off solenoid valve, so it would reply on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. For most systems this kit will work fine..
  • This kit is NOT for misting, ice maker line, line boosting, water transfer. This pump kit is designed for increasing water supply pressure to a RO water system.
Check Stock

DC 12-24V Mini Submersible Water Pump Max. 220L/H 10ft Lift for Aquarium Garden Pond Fall Hydroponic Fountains, Clear Water Only

  • Safe working voltage range: DC12-24V, power 4.5-6W. High Lift (with water pipe) 300cm, water height (no water pipes) 30cm..
  • Mini but high efficiency, flow rate up to: (DC 12V)200L/H (53GPH) - (DC 24V) 220L/H (58GPH).
  • Power cord length 45cm. Red and black lines (red line connected to positive +, black line connected to negative -).
  • Detachable machine cleaning (if there are slag, blocked pump, no work, etc.), after the machine is removed and washed, it will resume normal working condition. This pump can not be used in seawater environment, the pump shaft is made of stainless steel..
  • Submersible pump don't has self-priming function, must be completely immersed in water. Do not let the submersible pump leave the water surface or idling, it will damage the pump..
Check Stock

Mornajina Outdoor Misting Cooling System with Pump Kit, 49.2FT(15M) Misting Line with Filter, 20 Brass Mist Nozzles, 1 Brass Adapter (3/4\), 12V DC 60W 5L/Min, Self Priming Sprayer Water Pump

  • 【Outdoor Mist System with Water Pump】: 1 Instruction, 12V DC 60W 5L/Min self priming sprayer water pump+ power supply, 18.5M/60.69FT misting line with filter (including 3.5M/11.5FT spray hose+15M/49.2FT spray line), 20 brass misting nozzles, 20 T-tube connectors, 50pcs Cable Ties, 50pcs saddle clamps,3/4inch(25mm) Standard water tap adapter, 1 PTFE Tape..
  • 【Parameters of Water Pump】: Pump size: 16.5x10 x6cm(6.69x3.82x2.36inch). Equipped with 12V 5A 60W AC / DC power adapter.
  • flow rate: 5L / min. Atmospheric pressure 30PSI (2-3kg).
  • maximum working pressure: 30bar (450psi)..
  • 【Energy Conservation】: PE food grade materials, brass nozzle, American standard size, orifice nozzle diameter: 0.4mm (0.016"), thread size: UNC10-24, working pressure: 0.8MPa, flow rate: 5L / min. spray seat is sliding lock type fast push, can connect 3/4 inch (25mm) pipe. Normal working pressure is 30PSI (2-3kg). Limit pressure: 30bar (450psi), only use for outdoor cold water. No power consumption, less than the traditional watering water quantity..
  • 【With Pump Use & Without Pump Use】: These misting cooling system can be connected to water hose and use directly without pump. But if the water pressure is not enough and no water spraying out, ple....
Check Stock

ABN Water Pump Sprocket Retainer Tool - Full-Circle Sprocket Holding Tool Compatible with 2.2L GM Vauxhall Opel

  • [Protect Your Vehicle from Engine Damage] Secure the water pump sprocket with the ABN Water Pump Sprocket Holder to prevent engine vibration and....
  • [Ensure Easy Maintenance] Remove the access plate then line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to....
  • [Fits Your Vehicle] Water pump sprocket retainer holding tool is compatible with 2.2L Ecotec motors found in GM, Vauxhall, and OPEL vehicles.
  • [Built to Last] Heavy-duty steel provides maximum strength and durability while the black-oxide finish resists corrosion.
  • [Package Contents] Each water pump pulley holder tool includes (1) water pump holding tool and (3) 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

fishpond Eddy River Hat X-Large

  • 【High Quality Solar Water Pump Kit】Equipped with 180° rotatable high-efficiency solar laminates panels and USB cord, make the Solar bird bath fountain pump work well on sunny or cloudy days..
  • 【4 Nozzles Solar Water Pump】4 types of spray heads for different water flow and water height. Solar water fountain pump will start working in 3 seconds once being exposed to sufficient sunlight. Solar powered pump water up to 23.6in-27.5in, line length: 10Ft. water flow:0-160L/H. The height of water depends on the strength of the sunlight..
  • 【2 Install Methods and Easy Clean】Solar panel can be screwed on the wall or inserted into the ground. The solar power water pump is small and easy to hide. No need any tools to detach it, easy to separate and clean. It's the perfect gift for your family and friends. This solar water fountain will be a fantastic decorating addition to your life..
  • 【Eco-Friendly Solar Fountain】Biling solar powered water pump, safety and environmentally friendly. It can provide birds with a cool drink or quickly dipped in water without causing accidental injuries. Perfect for bird bath, fish tank, small....
Check Stock

Valterra - RP800 Rocket Hand Pump for RV Camper Holding Tank Faucet Pump - Chrome

  • COLD WATER RV FAUCET: Hand pump is ideal for RV's and campers with a holding tank that require a pump faucet.
  • EASY TO USE: Rotate the handle back and forth to pump water through the faucet.
  • FUNCTIONAL PRIME LOCK: Keep the water in prime hold position for immediate water release, or leave the line in drain position to return water to the....
  • EASY TO INSTALL: Simply drill a hole through the countertop, place pump, and connect hose to water tank.
  • REPLACEABLE PARTS: Valterra repair kit RP320 available for making quick and easy repairs.
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

APCOM UT1 Hot Water Recirculation Pump For Under Sink - Instant Hot Water Recirculating System For Tank Type Water Heaters

  • Instantly Experience Hot Water - Enjoy the comfort and convenience of hot water in your home without the wait..
  • Energy & Cost Efficient - The most energy efficient circulator on the market that reduces waste and costs associated with the consumption of water..
  • Fully Automatic Operation - This under sink recirculation system is controlled with a built-in thermostat and timer to conserve water. The pump typically runs three to four times per hour for one to two minutes..
  • For technical support or installation questions, contact (401) 785-3000. One Wrench Installation - Kit includes stainless steel pump, 2 braided hoses, 2 tees and all necessary fittings. Installs under sink in less than 10 minutes. Pump is designed for indoor installation. No plumber required..
  • Without Dedicated Return Line - Designed for single pipe system homes without an existing hot water return line and up to 250 ft of household piping. Works with standard hot water tank or indirect water heater. Electrical outlet required under sink..
Check Stock

MUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More

  • The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
  • The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
  • Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to install the tool.
  • Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
  • The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

Watts 500800 Instant Hot Water Recirculating System with Built-In Timer, Easy to Install

  • WATTS HOT WATER RECIRCULATING PUMP: Provides hot water at every faucet or shower when needed, eliminating wasted water , 0.5 inches bypass value.
  • BEST SELLER RECIRCULATING SYSTEM: Conserve Water – Up to 15,000 gallons of water per year. Save Money – Up to 10% of your water bill and its cost only 5 a day to operate.
  • EAST TO INSTALL: This unique product connects easily to existing plumbing. Easy to install in less than 1 hour. And it is maintenance free.
  • WATTS HOT WATER RECIRCULATING SYSTEM: The Kit Includes: Pump with timer, 2 adapters with rubber washers, valve mounting screws, sensor valve, two 12-inch supply lines.
  • RECIRCULATING PUMP WITH TIMER: 24-hour programmable timer activates pump when you need it. And it is extremely quiet compared to other system in the market – no vibrations. Do not use with tankless water heaters. Insert the 115V plug on the line cord from the pump into a properly grounded 115V outlet.
Check Stock

hygger 24V DC Water Pump Submersible Saltwater Aquarium Sump Pump with LCD Display Controller 1060 GPH

  • DC Powered Controllable Water Pump — DC motor with magnetic drive and ceramic shaft design, extremely powerful, energy saving yet very quiet, this dc pump only uses 24 volts power saving 65% energy over traditional pump, safe & low consumption.
  • Easy to Read External Controller — Build in external controller, easy to operate, offers up to 71 speed setting for you to customize water flow and feeding setting ( turn the pump off for 10 minutes for feeding). Easy to read red Led display.
  • Inline or Submersible — This Versatile Water Pump can be used either submersible or in-line in Freshwater or Saltwater. Ideal for sump tank, freshwater and saltwater aquariums, ponds, waterfalls, fountains and water features.
  • Auto Shut Off — Water Pump will automatically power off for 2 minutes when detects no water or over voltage. Enables memory function. Comes with two types intake screens, it will handle debris up to 2/3 inch, preventing clogging and reducing maintenance.
  • Max Lift: 13.1', 33 Watts, output voltage 24V DC, input voltage 100-240V. Comes with 2 pcs screws (1-1/8.
Check Stock

Biling Solar Water Fountain Pump Outdoor, Upgraded Solar Fountain Pond Pump Kit with Stake, Solar Powered Fountain Water Pump for Bird Bath, Garden, Backyard, Pool, Fish Tank

  • 【High Quality Solar Water Pump Kit】Equipped with 180° rotatable high-efficiency solar laminates panels, the solar water fountain pump has more than 10,000 hours of lifespan, delicate and perfect. Built-in brushless motor that provides a longer service life and lowers energy consumption..
  • 【4 Nozzles Solar Water Pump】4 types of spray heads for different water flow and water height. Solar water fountain pump will start working in 3 seconds once being exposed to sufficient sunlight. Solar pond fountain water up to 23.6in-27.5in, line length: 10Ft. water flow:0-160L/H. The height of water depends on the strength of the sunlight..
  • 【2 Install Methods and Easy Clean】Solar panel can be screwed on the wall or inserted into the ground. The solar water pump is small and easy to hide. No need any tools to detach it, easy to separate and clean. It's the perfect gift for your family and friends. This solar water fountain will be a fantastic decorating addition to your life..
  • 【Eco-Friendly Solar Fountain】Biling solar powered water pump, safety and environmentally friendly. It can provide birds with a cool drink or quickly dipped in water without causing accidental injuries. Perfect for bird bath, fish tank, small pond, pool, garden decoration, water ci....
Check Stock

ACBungji Misting Cooling System with Pump Filter Kit,20FT/6M Mist Line 6 Brass Mist Nozzle 116 PSI 5L/Min DIY for Outdooor Patio Porch Greenhouse Backyard

  • Including: 12V pump + AC adapte + converter + filter + 11.5feet/3.5M water hose + 20feet/6M mist line + 6 brass nozzle + 6 splitter + 20 saddle clamp+ 20 cable tie + sealing belt + manual. Kindly Reminder: Please install as the product manual to avoid leak. If it is leaked, please using sealing belt. And 2 connector of pump should add joint ring. Joint ring is not included in package..
  • Come with pump and filter. Apply to cister/pool/bucket with early rough water filtration, filter should fully sink into water with heavy load. Or directly connect to tap with another threaded adapter(3/4") and remove filter.
  • Easy for DIY. After buttoning mist nozzle, assembling pump and filter, holing mist line in position, charging with electricity, smooth cool mist will come in 1 minute, bring you joy and relaxed, lightly chill skin and ease heat of warm & humid days.
  • Great for front porch, garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, small fountain, etc.
  • Other. 12V 60W pump, flow rate 5L/min, working pressure 165 psi/0.8Mpa, size 16.5*10*6cm.
  • 12V 6A 60W AC to DC Adapter Power Supply.
Check Stock