Reviews Implant Torque Driver

Berkeley Implant Dental Implant Multi-Driver Set 6 Short & 6 Long Drivers for Dental Practices

  • Includes 12 different driver tips (6 short & 6 long) with 4x4mm square insert, a 50 Ncm torque wrench, a hand adapter, and an organizer base. Compatible with all major implant brands. See photos..
  • The driver tips are precision-milled from hardened stainless steel and are torque-tested to sustain over 42 Ncm in strength – tough enough to provide the torque force generally required for tightening screws by major implant manufacturers, yet still gentle for the screws. Identification of the driver tips are laser etched on the side of each of the driver shaft. Short drivers are 7mm, long drivers are 14mm..
  • Comes with an elegant organizer with the names of the tips and their graphical icons laser-etched to help keeping the driver set organized. The case has pre-drilled place-holders for 6 long and 6 short drivers, plus 6 place-holders for spare drivers, 3 short and 3 long. You can have peace of mind knowing that the small items are all in their places when you need them..
Check Stock

MediDent Dental Universal Implant Prosthetic Driver Kit with Drivers and Torque Wrench Tool

  • This kit gives you the ability to handle any implant brand attachment. Save time and money by not having to order drivers from many different companies. This kit is used to remove and fasten implant prosthetics. It includes a complete set of components for tightening clinical and prosthetic screws to the correct torque value..
  • Green – 1.2mm Hex (Long 14mm, Short 9mm): Nobel Biocare, 3I, Keystone, Megagen, Hiossen, Dentium.
  • Blue – 1.25/1.27mm Hex (Long 14mm, Short 9mm): Zimmer, Astra, BioHorizons, Intr-Lock, MIS, SteriOss, Sybron, Implant Direct, PerioSeal.
  • Purple – ITI/SCS (Long 14mm, Short 9mm): “ITI” driver for Straumann SCS.
  • Yellow – Star/Unigrip (Long 14mm, Short 9mm): “Star” driver for Nobel Biocare Active and Unigrip Screw, Neoss.
Check Stock

FIX IT STICKS Tightening +/- 10% Accurate 15-65 inch-lbs All-In-One Torque Driver Tool Kit w/ T-Way Wrench Bits Socket Adapters

  • MULTIPURPOSE USE - Choose Fix It Sticks All-in-One Torque Driver, Fix It Sticks All-in-One Torque Driver Kit or Mini All-in-One Torque Driver to tighten down your scope rings, mounts, actions screws, red dot sights, mounting plates, etc. to the correct tongue while in the field, at the range, or at home.
  • NO OVER/UNDER TIGHTENING - Enjoy ultimate performance with lightweight and compact All-in-One Torque Drivers - no more over or under tightening your critical components.
  • EASY ADJUSTMENT - Just turn the drive handle until the hash mark lines up with the torque value you need (from 15 - 65 inch-lbs).
  • in case with Mini All-in-One Torquer Driver just turn the drive handle until the hash mark lines up with the torque value you need (from 6 - 25 inch-lbs).
  • 1/4" BIT & DRIVER COMPATIBLE - These adjustable Torque Drivers accept any standard 1/4" Bit and works with any standard 1/4" Driver.
  • ZIPPERED CASE (KIT ONLY) - The Fix It Sticks All-in-One Torque Driver Kit goes with a zippered carrying case with a holder.
Check Stock

IDEAL Electrical 35-936 Torque Screwdriver Kit [7 Pieces] – 0 to 36 Lb. Adjustable Torque Screw Driver w/ Phillips, Flat, Square Bits. Driver Bit Set

  • Electrical Screwdriver: an assortment of screwdriver and driver bits, this 7-pcs. screwdriver set is commonly used by electricians and maintenance engineers to tighten cross- and slotted-head screws.
  • Durable Construction: carefully engineered with hard-wearing materials, the torque driver is immune to abrasion and wear over a prolonged usage and stays resistant to corrosion as well.
  • Adjustable Torque: the bit driver has user-settable torque from 0 to 36 lb. It can be changed using the unique torque limiting clutch which disengages once the preset torque is achieved, preventing overtightening and possible damage.
  • Protective Cap: the nut driver bit set is equipped with a protective vinyl cap which not only keeps the handle protected. but also shades the torque key slot that is used to get accurate control torque adjustments.
  • Product Specification: the 7-in-1 driver bit set comes with #1 and #2 Phillips bits, #1 and #2 Square bits, and 1/4 in. and 3/16 in. Slotted/Flat bits.
Check Stock

Cordless Impact Driver Kit,20V MAX 1/4" Impact Driver Set with 1350 in-lbs Torque,Brushless Power Impact Driver with 2.0Ah Li-ion Battery,1 Hour Fast Charger and Tool Bag,LED light (Orange)

  • 【High Efficient Torque & Variable Speed】Are you troubled by intermittent operation？The powerful impact driver delivers 1350 In-lbs Max torque & 2200 RPM to provide you a consistent working process and keep the most fastening torque than a cordless drill. Also, you can adjust the variable speed you like by pressing the trigger button. In short, the powerful impact driver can help you force the driver bits into wood/metal/ or different type surface easily w/ the high performance impact driver..
  • 【Ultra Quality Battery】 Are you still struggled with the discontinuous operation? Worried about the battery remains? This durable impact driver equipped w/ ....
Check Stock

30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4' Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589

  • 【30 Series Torque Converter and Go Kart Drive Belt】 ：New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4″ Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589..
  • 【Torque Converter】：This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series..
  • 【Wide Use–torque converter 3/4】: Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc..
  • 【Go Kart Drive Belt】: 30 Series Go Kart Drive Belt torque converter belt Replaces For manco 5959/comet 203589 murray 12-8487 baja Motorsports BB65-395 ken-Bar 300-009 255-299 rotary 8487. Width: 0.4″, Length: 27-1/32″..
  • 【Wide Use–go kart clutch belt】: The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley ne....
Check Stock

RYOBI - ONE+ 18V Cordless Combo Kit (3-Tool) with (1) 4.0 Ah Battery and Charger - PCK105KN

  • Impact Driver: Weighs only 2.65 lbs. to prevent user fatigue while providing powerful speed and torque - Impact Driver: Base has MAGTRAY Magnetic Bit Holder for carrying extra bits and hardware.
  • Impact Driver: 1/4 in. quick-connect coupler provides quick and easy bit changes - Impact Driver: Provides up to 2800 RPM - Impact Driver: Powerful 1800 in./lbs. of torque for high-torque applications.
  • Reciprocating Saw: Easy blade change lever for quick and easy blade changes - Reciprocating Saw: 60% faster cutting than previous model (P514).
  • Reciprocating Saw: Adjustable, pivoting shoe for optimized cutting control - Reciprocating Saw: Up to 3,400 strokes per minute (SPM) for smooth, fast cutting with a 1 in. stroke length for more material removal per stroke.
  • Work Light: 130 Lumens of light output for 100 yds. of beam distance - Work Light: Integrated mounting slot designed for a 2x4.
Check Stock

Makita CT411 12V max CXT® Lithium-Ion Cordless 4-Pc. Combo Kit (1.5Ah

  • 3/8" Driver-drill with 2-speeds (0-450 & 0-1, 700 RPM) delivers up to 250 in.Lbs. Of max torque.
  • 3/8" Driver-drill features a compact design at only 7" Long and weighs only 2.4 lbs. With battery for reduced operator fatigue.
  • 1/4" Impact driver with variable speed (0-2, 600 RPM & 0-3, 500 IPM) delivers up to 970 in.Lbs. Of max torque.
  • Impact driver features a compact design at only 6-1/8" Long and weighs only 2.3 lbs. With battery for reduced operator fatigue.
  • Variable speed 3/8" Impact wrench (0-2, 600 RPM & 0-3, 200 IPM) provides 103 ft. Lbs. Of max torque in an ultra compact design.
Check Stock

RIDGID 18V Brushless 1/2" High Torque Hammer Drill/Driver

  • Drill/Driver: All Metal Gears For extended durability.
  • Drill/Driver: 24 Position Clutch Ring For ultimate precision when driving.
  • Impact Driver: Quick-Release Hex Collet Spring ejection for easy loading and removal.
  • Impact Driver: High Torque Output 0 - 1,800 in-lbs. of Torque.
  • Brushless Motor Technology Delivers more runtime, more power, and longer motor life.
Check Stock

Wiha 28589 Torque Control Set, Accurate Torque 1 to 50 Inch-Pounds, 59 Piece

  • Drivers meet EN/ISO 6798, BS EN 26789 and ASME B107.14M standards.
  • Certificate of calibration included for each torque driver.
  • Fast and easy torque adjustments with direct reading window scales.
  • Set includes 40 precision machined insert bits and 14 sockets.
  • Cushion grips for maximum user comfort, handle sizes proportioned for optimal torque performance.
  • Set includes forty precision machined insert bits and fourteen sockets.
Check Stock

18V SubCompact Brushless 1/2 in. Drill/Driver and Impact Driver Combo Kit

  • Drill/Driver: All Metal Gears For extended durability.
  • Drill/Driver: 24 Position Clutch Ring For ultimate precision when driving.
  • Impact Driver: Quick-Release Hex Collet Spring ejection for easy loading and removal.
  • Impact Driver: High Torque Output 0 - 1,800 in-lbs. of Torque.
  • Brushless Motor Technology Delivers more runtime, more power, and longer motor life.
Check Stock

RYOBI PCK700KN ONE+ 18V Cordless 9-Tool Combo Kit with 3 Batteries and 6-Port Supercharger

  • Drill/Driver: 1/2 in. keyless chuck with a 24-Position clutch that adjusts torque output to control the depth of a screw or fastener.
  • Drill/Driver: 2-Speed gear box offers a low speed (0 - 450 RPM) for high torque applications and a high speed (0 - 1,750 RPM) for fast applications with 500 in./lbs. of torque to handle all your drilling and driving needs.
  • Impact Driver: 1/4 in. quick-connect collet provides quick and easy bit changes.
Check Stock

RIDGID 9 Amp Corded 1/2 in. Spade Handle Mud Mixer

  • Brushless Motor Technology delivers more runtime, power, and longer motor life.
  • Impact Driver: SubCompact model is 30% less weight and 35% more compact in comparison to RIDGID OCTANE Brushless Impact Driver R86039B.
  • Impact Driver: High torque output with 1,800 in./lbs. of torque and 2,900 RPM.
  • Impact Driver: Quick release hex collect ejection for easy loading and removal.
  • Battery: Up to 2X more runtime and has 2X longer life compared to standard lithium-ion batteries.
Check Stock