Reviews Imperial Gauge

Necygoo Weld Gauge Set Stainless Steel 0-60mm Cam Type Gauge and 3.2mm-25.4mm 1/8''-1'' Weld Fillet Gauge with Bag Imperial Metric Measurement Welding Gauge

  • ❤WELD GAUGE SET❤ Package Includes 1 x Cam Type Gauge, 1 x Weld Fillet Gauge, 2 x Instructions, 2 x Bags. This Weld Gauge, with Imperial Metric Measurement, is Suitable for Measuring Length, Height, Width and Angle for Welding..
  • ❤CAM TYPE GAUGE❤ Linear Measure Range: 0-60mm (0-2 in), Curving Measure Range: 0-20mm (0-1 in), Angle Measure Range: 0-60 Degree..
  • ❤WELD FILLET GAUGE❤ Metric Measure Range: 3mm, 4mm, 5mm, 6mm, 8mm 9mm, 10mm, 11mm, 12mm, 14mm, 16mm, 19mm, 22mm and 25mm While Accuracy is Less Than +/- 0.5mm. Imperial Measure Range: 1/8” (3.2mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (7.9mm), 3/8” (9.5mm), 7/16” (11.1mm), 1/12” (12.7mm), 5/8” (15.9mm), 3/4” (19.1mm), 7/8” (22.2mm) and 1” (25.4mm) While Accuracy is Less Than +/- 1/50” ..
  • ❤STAINLESS STEEL GAUGE❤ Both Gauge Are Made of Stainless Steel, Which is Very Durable and Won’t Be Bended Easily. With Smooth Surface and Clear Scale (Please Be Careful for The Sharp Edge When Use)..
  • ❤PACKAGE❤ Package Includes A Cam Type Gauge, A Weld Fillet Gauge and Manual. If You Have Any Question, Please Contact Us..
Check Stock

CAMWAY 2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge,16pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools

  • 【Two Kinds of Feeler Gauge 】Feeler gauge set, straight feeler gauge with 32 pieces blades and 16-Piece blades offset valve bent feeler gauge..
  • 【Metric and Imperial Dual Marked】Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easy identification the Feeler and choose the suitable one conveniently..
  • 【 360-degree Swivel Design 】The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable..
  • 【Anti-rust 65 Manganese Steel】There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don't put on the humid environment..
  • 【Use for】The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.It is mainly used for checking the gap value between two joint surfaces..
Check Stock

2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge, 16Pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools

  • Feeler gauge set: 2 pack feeler gauges, made of 65 manganese steel, the measuring feeler gauge has 32 blades thickness and 16 blades thickness.
  • Foldable, easy and convenient to take and store.
  • Metric and Imperial Dual Marked：Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easily identify the Feeler and choose the suitable one conveniently..
  • 360-degree Swivel Design：The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable..
  • Reminder: There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don't put on the humid environment..
  • Use for：The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, this method can be used to judge, or it can be judged by the inspector according to the tightness of the feeler gauge and the measured surface. Mainly used to check the gap value between two joint surfaces..
Check Stock

6\ / 150 MM DEPTH GAUGE METRIC & IMPERIAL STANDARDS - ENGINEERING

  • 6" / 150 MM DEPTH GAUGE METRIC & IMPERIAL STANDARDS - ENGINEERING.
  • This steel depth gauge is used to quickly obtain measurements of holes or grooves by adjusting the rule to the desired depth.
  • This depth gauge consists of a gun metal finished base and a steel rule.
  • This gauge can be adjusted to the required measurement and then locked into position by a knurled nut.
  • Head is cut out on one side, adjacent to the rule, permitting easier and more precise measurements.
Check Stock

Scubapro Wrist Mount Imperial Depth Gauge

  • Handy depth gauge with a streamlined and comfortable wrist strap features a fluorescent imperial scale and built-in temperature gauge..
  • 200-foot linear scale features a maximum depth indicator for the easy logging of maximum depth..
  • Oil -filled gauge is housed in an impact-resistant nylon case..
  • Bourdon tube design provides precise readings at all depths..
  • Great for both recreational and technical diving, it's backed by a manufacturer's limited 1-year warranty..
Check Stock

Glarks 2 Pack Stainless Steel Feeler Gauge Set, 32 Blades 0.04-0.88 mm Dual Marked Metric and Imperial Gap Measuring Tool and 16 Blades Standard SAE and Metric Gap Width/Thickness Measuring Tool

  • ★【What You Get】: In this feeler gauge set, it include 32 blades dual marked metric and imperial gap measuring tool, 16 blades standard SAE and metric feeler gauge, they are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the feeler gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 32pcs metric and imperial tool measuring range is 0.0015 Inch (0.04mm) to 0.035 Inch (0.88 mm), 16pcs standard SAE and metric feeler gauge measuring range is 0.0015 Inch 0.005 Inch(0.127) to 0.020 Inch ( 0.508 mm)..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the blades, tools are contains a blade notch for easy blade removal, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors, will help you quickly and easily measure gap width/thickness. Suitable for designers, engineers, mechanics to measure the tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps, guitars gaps, engines ....
Check Stock

AQUALUNG i300C 2 Gauge Dive Computer (Black/Blue)

  • Compact pressure gauge displays 0-6000psi or 0-400bar..
  • Compact depth gauge shows depth to 200ft/60M..
  • A C1 compass can be attached at the bottom of the console boot..
  • Available in Imperial or metric versions..
Check Stock

Mares Mission 1 Compact Pressure Gauge Imperial (PSI)

  • Compact pressure gauge (0-6000psi) and (0-400bar)..
  • Dual gauge displays imperial and metric units simultaneously..
  • Red zone displays at 0-800psi and 0-50bar..
Check Stock

5pcs Stainless Steel Screw Thread Pitch Cutting Gauge Tool Set, Metric Imperial and America SAE Type Screw Gauge for Industrial Measurement, 3Pcs Center Gage + 1Pc America Type + 1Pc Metric Imperial…

  • ☆ 52pcs Thread Pitch Gauge ☆ : MR Stainless Steel Screw Pitch Measuring Tool 0.25, which is useful to check the tool angle when cutting threads on a metal lathe, check the angle of the thread cutting tool on the V-groove of the gauge.
  • ☆ Premium Material ☆: Made of MR stainless steel, the toothed edges are sharply defined, and the numbers are stamped and easy to read, to ensure the accuracy of measurement.
  • ☆ Good Elasticity & High Strength ☆ The Surface of thread pitch gauge is polished, chrome-plated and high rust-proof.
  • ☆ Metric & Imperial ☆: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3 0.25and 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • ☆ At a glance, Easy to use ☆ : ideal for check the thread size, can be used for measuring the imperial screw thread and metric.
Check Stock

Cressi Sub Start Equipment for Scuba Diving, made in Italy

  • PACKAGE INCLUDES: Cressi Start BC, Cressi AC2 XS2 Regulator-Yoke, Cressi XS Octopus with Hose, Cressi Mini Two Gauge Analog Console, (Imperial).
  • START BCD: Ultra durable construction. 2 large pockets cargo pockets with velcro closure. Rigid padded backpack and carry handle. Three exhaust valves for buoyancy adjustment in any position. 2 technopolymer d-rings. 2 spring-clip holding rings. Octopus holder. Gauge holder..
  • AC2 XS2 REGULATOR: Non-balanced first stage with high performance and reliability.Downstream system. Adjustable intermediate pressure from the out side of the regulator due to our patented ACs design..
  • XS OCTOPUS: The XS second stage features a comfortable mouthpiece and an easy to purge button. Adjustable venturi effect. Easy maintenance. Jacketed Hose extremely light and flexible..
  • MINI 2 GAUGE: Pressure gauge dial is color-coded in red, green and blue for instant readability. Reads pressures to 350 bar or 5000 psi. Mini-depth gauge reads to 70 meters (230 feet). Maximum depth indicator. Luminescent face on the depth gauge.
Check Stock

StewMac String Action Gauge And Ruler Metric Stainless Steel - Designed by StewMac The Original measuring tool for acoustic and electric guitar and bass setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt....
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common....
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure....
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20....
Check Stock

ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metric 60 Degree & & US 60 Degree Thread Pitch Gauge for Industrial Measurement

  • It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All the blade was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

SUUNTO Cobra Dive Computer Console (Cobra 3 Black)

  • Operating Modes: Air, Nitrox and Gauge, Programmable for 21% to 50% Oxygen Mixtures.
  • Displays Oxygen Partial Pressures from 17.4 psi to 23.2 psi (1.2 to 1.6 bars) | Altitude Adjustable Up to 10,000' (3,000 meters).
  • Maximum Depth Display: 492' (150 meters) | Operational Depth Display: 262' (80 meters) | 12 or 24-Hour Clock Format.
  • Temperature Gauge to 1.5 DegreeF (1 DegreeC) Accuracy | Imperial/Metric Programmable | Decompression Stop Data | Audible Alarms.
  • 36 Hour Profile and Logbook Memory | Back Lite Display, Easy to Read in Low Light & Night Conditions | 0 to 5,000 psi (360 bars) Display.
Check Stock