Reviews Impeller Head

BURCAM 400416T 3/4HP Stainless Steel Sewage Grinder Pump

• 3/4 HP HEAVY DUTY SEWAGE GRINDER PUMP: The pump is made of cast iron and stainless steel for longevity and includes a cast iron grinder impeller. This pump can be used in a new installation or to replace an existing sewage pump. Contractor grade PRO series built..
• GRINDER PUMP PERFORMANCE: The maximum head is 25 feet and the capacity is up to 4200 gallons per hour. ..
• HEAVY DUTY CONSTRUCTION: Solid cast iron and stainless steel construction equipped with a grinder type impeller made of cast iron..
• SEWAGE GRINDER PUMP: High performance for residential sewage applications. Reduces clogging of impeller and jamming situations..

Pump, Grinder, 2 HP, 15a

• ...of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
• GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
• Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM of Water @ 20 Ft. of Head: 50 Shaft Seal Material – Pumps: Silicon Carbide, Viton Agency Compliance: CSA C/US Duty: Continuous Voltage – Pumps: 208/230VAC Discharge NPT: 1-1/4″ F Max. Diameter Solids: 2 in Duty Cycle: Intermittent.
• Switch Actuation: Tether Float Flow Rate @ 40 Ft. of Head: 48.0 gpm Rated Voltage: 208/230VAC Discharge Gender: Female Flow Rate @ 60 Ft. of Head: 42.0 gpm Discharge: 1-1/4″ FNPT Body Material: Cast Iron Flow Rate @....

B BURCAM QUALITY PUMPS SINCE 1978 400416TZ 3/4HP Stainless Steel Sewage Grinder Pump

• 3/4 HP HEAVY DUTY SEWAGE GRINDER PUMP: The pump is made of cast iron and stainless steel for longevity and includes a cast iron grinder impeller. This pump can be used in a new installation or to replace an existing sewage pump. Contractor grade PRO series built..
• GRINDER PUMP PERFORMANCE: The maximum head is 25 feet and the capacity is up to 4200 gallons per hour. ..
• HEAVY DUTY CONSTRUCTION: Solid cast iron and stainless steel construction equipped with a grinder type impeller made of cast iron..
• SEWAGE GRINDER PUMP: High performance for residential sewage applications. Reduces clogging of impeller and jamming situations..

SANZH ONEAM Art Dog Cat Pet Hair Fur Remover,Puppy Electric Hair Shedding Grooming Brush Comb Remover Unload Vacuum Cleaner Trimmer Shedding Tool

• 1 MATERIAL:Made of plastic + rubber,it's fast,easy and gentle to use.
• 2 SAFETY:Hair care of your pet and keep your pet well cared for,and will not hurt the pet need for dog,cat or other pet with hair.
• 3 FIT:Not just for grooming animals,ideal for cleaning bedding, sofa and car seat,clothes and furniture with the included fabric hair removing head.
• 4 MASSAGE:Soft rubber head can also give pet massage,easy clean assembly with screw on head and impeller cap and slip on impeller.
• 5 EASY TO USE:Features a hair collection canister,you don't need worry about the hair will fall to the ground everywhere,it's fits comfortable in the....

Pedicure SPA Chair Part Magnetic Head (4 pin) for LURACO Jet Motor

• PEDICURE SPA CHAIR PART MAGNETIC HEAD FOR LURACO JET MOTOR DIMENSION: 3 3/8" DIAMETER BACK HEAD X 3 1/8" DIAMETER FRONT HEAD.
• There is no shaft seal, will never leak, is worry free..
• The Magnet-jet be easily clean, and service.
• Magnetic Head set ( 1 - base , 1 - magnetic impeller and 1 - cover). This Head can be fitted with all Luraco magnetic Motor ..

R&Dog Pedicure SPA Chair Part Magnetic Head (4 pin) for LURACO Jet Motor

• PEDICURE SPA CHAIR PART MAGNETIC HEAD FOR LURACO JET MOTOR DIMENSION: 3 3/8" DIAMETER BACK HEAD X 3 1/8" DIAMETER FRONT HEAD.
• There is no shaft seal, will never leak, is worry free..
• The Magnet-jet be easily clean, and service.
• Magnetic Head set ( 1 - base , 1 - magnetic impeller and 1 - cover). This Head can be fitted with all Luraco magnetic Motor ..

TCP Global Set of 2 Paint, Epoxy Resin, Mud and Cement Mixer Blades - Power Drill Stirring Tools - 15.5" & 14" Ribbon Mixing Paddles, 3/8" & 5/16" Hex Head Shafts - Mix 1 to 5 Gallon Bucket - Concrete

• Combo Pack of 2 Different Sizes of Durable Power Mixer Blade Tools That Fit On 5/16" and 3/8" Sized Drills For Uniformly Mixing Paints, Epoxy Resins, Mud, Cement, Concrete Or Any Other Coating Or Powder Compounds That Have Low To High Viscosities..
• Includes A 15.5" Long Steel Mixer Blade with A Nearly 3/8" Hex Head Steel Shaft and A 4" Impeller. It Also Contains A 14" Long Steel Mixer Blade with 5/16" (7.75mm) Hex Head Steel Shaft, and A 2.5" Impeller. The Hex Head Steel Shafts To Prevent The Blades From Slipping In A Drill..
• The Durable Steel and Plastic Impellers Mix Materials Quickly and Evenly, As They Lift and Blend Materials From The Bottom of The Container. Mixers Are The Ideal Size For Stirring Coatings From 1-Quart Mixing Cups Up To 5-Gallon Cans, Buckets and Pails..
• Each Mixer Includes A Plastic Head Cap On Top of The Shaft To Hang and Store Them Easily..

Pipeless Magnetic Motor Jet Head for Luraco Pedicure Spa Chair Part Magnetic Head Disposable Liner

• Pedicure spa chair part magnetic head 4 pin for luraco jet motor.
• Magnetic Head set ( 1 - base , 1 - magnetic impeller and 1 - cover). This Head can be fitted with all Luraco magnetic Motor ..
• There is no shaft seal, will never leak, is worry free..
• The Magnet-jet be easily clean, and service.
• Spa pedicure parts,magnet jet head replacement.

MEDAS 330 GPH 115V 1/10HP Auto Portable Water Transfer Pump Utility Pumps with Suction Hose Kit

• This PORTABLE PUMP made of durable material, the house material is Powder Coated Carbon Steel, and the impeller material is NBR Rubber, the hose connectors is made of Metal which is higher reliability than plastic threads..
• This is a LIGHT WEIGHT and PORTABLE self-priming pump with a convenient carry handle. This water pump is easy-to-operating and easy-to-service, connect hoses, plug in and you’re ready to go. PLEASE fill the water in the PUMP HEAD before First-Time use!.
• This TRANSFER PUMP includes 6 feet SUCTION HOSE and WATER SUCTION STRAINER ATTACHMENT as well as an additional IMPELLER REPLACEMENT KIT. If use water suction attachment, this water pump can remove water down to 1/8 inch of surface..
• MULTIPLE APPLICATIONS: MEDAS water transfer utility pump is the perfect tool for aquariums, outdoor ponds, swimming pools, leaks and flooding in basements, flushing a tankless water-heater, etc.
• Not just for utilities, it also works well to water your lawn and garden.

Ximoon Replacement for LURACO Jet Motor Pedicure SPA Chair Part - Magnetic Head BF-004 Pedicure SPA Tubs Contains Propeller and Cover

• PEDICURE SPA CHAIR PART MAGNETIC HEAD FOR LURACO JET MOTOR DIMENSION: 3 3/8" DIAMETER BACK HEAD X 3 1/8" DIAMETER FRONT HEAD.
• There is no shaft seal, will never leak, is worry free..
• The Magnet-jet be easily clean, and service.
• Magnetic Head set ( 1 - base , 1 - magnetic impeller and 1 - cover). This Head can be fitted with all Luraco magnetic Motor ..

Dayton Bronze Self-Priming Flexible Impeller Pump Head - 6KHN8

Jabsco 6050-0003 Marine Series Utility General Purpose Pump 110-Volt Nitrile Impeller Open Drip Proof Moto Non-CE 1 NPT Ports Bronze

• 23 GPM (87 LPM) at 10’ (3m) of head, 1" NPT internal ports.
• Bronze impeller body, JABSCO Nitrile Impeller for fresh and salt water as well as diesel, light oils, and antifreeze transfer.
• Recommended for liquid temperatures between 50° to 180°F (10° to 83°C), Replaceable wearplate.
• Lip type shaft seal, 3/4 HP open drip proof (ODP) motor, overload protected, 1725 RPM, 60 Hz, single phase.
• 115/230 VAC, with 8 foot cord and plug (wired for 115VAC operation), 35-1/2 lbs. (approx.) (16.1 kg).

Shop Fox W1829 Benchtop Jointer, 6-Inch

• Motor: 1-1/2 horsepower, 110V, 12 amp, single-phase.
• Cutter head speed: 10,000 RPM, 20,000 cuts per minute.
• Two-knife HSS cutter head provides clean cuts, fully adjustable aluminum fence with stops.
• 2-1/2-inch dust port keeps work area clear of dust.
• Includes free pair of safety push blocks, built-in mini impeller-driven dust collection fan and collection bag.Cutterhead diameter: 1-7/8 inch.