Reviews Image Dynamics Idq 8

ID10D2 V.4 - Image Dynamics 10' 300W RMS 600W Max Dual 2-Ohm V.4 Subwoofer

  • ID12D2 V.4 - Image Dynamics 12" 300W RMS 600W Max Dual 2-Ohm V.4 Subwoofer.
  • Mounting Depth: 5.67" | Sealed: 0.8 - 1.5 | Ported: 1.5 - 2.0.
Check Stock

ZeroR Stop Leak Super Seal for R134a System in self Sealing can Install Hose Included

  • SUPER SEAL - AC Pro made by Interdynamics IDQ seals metal leaks in condensers, evaporators, accumulators, receiver and driers. Also works on rubber....
  • CAN TAP - Comes with it's own can tap that will not be reused. No additional tools required!.
  • SAFE - Safe for all R-134A systems and Compatible with all lubricants.
  • 3oz - Can size is 3oz by weight and is mostly stop leak with just enough refrigerant to propel the stop leak chemical into the system..
Check Stock

XS-57 - Image Dynamics 5'x7' 2-Way Component Speaker System

  • 10" Dual 2 ohm IDQ V.4 Series Subwoofer | Mica-reinforced polypropylene cone woofer | Parabolic roll surround | Ability to custom match the basket color to your personal installation | Conex spider with integrated tinsel leads | New V4 Metal Basket | High-temperature aluminum voice coil | Proprietary voice coil attachment design.
  • Power Handling: Peak: 1000 watts | RMS: 500 watts | Recommended Power Range: 50-500 watts.
  • Nominal Impedance (IMP): Dual 2 Ω | DC Resistance (Re): 1.85 Ω | Resonance Frequency (Fs): 31.77 Hz | Equivalent Volume (Vas): 44.71 L | Electrical Q Factor (Qes): 0.79 | Mechanical Q Factor (Qms): 2.90 | Total Q Factor (Qts): 0.62 | Peak Excursion (Xmax): 28 mm | Piston Area (Sd): 383.58 cm2 | Sensitivity: 84.50 dB 1w/1m.
  • Sealed Enclosure Suggestion: 1.1 cu.ft. | Ported Enclosure Suggestion: 1.45 cu.ft. | Displacement: 0.07 cu.ft. | Mounting Depth: 5.81 in | Outside Diameter: 11.04 in | Cutout: 9.57 in.
Check Stock

Image Dynamics ID65CS 6.5" 100W RMS ID Series Component Speakers System

  • 10" Dual 2 ohm IDQ V.4 Series Subwoofer | Mica-reinforced polypropylene cone woofer | Parabolic roll surround | Ability to custom match the basket color to your personal installation | Conex spider with integrated tinsel leads | New V4 Metal Basket | High-temperature aluminum voice coil | Proprietary voice coil attachment design.
  • Power Handling: Peak: 1000 watts | RMS: 500 watts | Recommended Power Range: 50-500 watts.
  • Nominal Impedance (IMP): Dual 2 Ω | DC Resistance (Re): 1.85 Ω | Resonance Frequency (Fs): 31.77 Hz | Equivalent Volume (Vas): 44.71 L | Electrical Q Factor (Qes): 0.79 | Mechanical Q Factor (Qms): 2.90 | Total Q Factor (Qts): 0.62 | Peak Excursion (Xmax): 28 mm | Piston Area (Sd): 383.58 cm2 | Sensitivity: 84.50 dB 1w/1m.
  • Sealed Enclosure Suggestion: 1.1 cu.ft. | Ported Enclosure Suggestion: 1.45 cu.ft. | Displacement: 0.07 cu.ft. | Mounting Depth: 5.81 in | Outside Diameter: 11.04 in | Cutout: 9.57 in.
Check Stock

Image Dynamics ID12 V.4 D2 12' 300W RMS Dual 2-Ohm V.4 Subwoofer

  • 10" Dual 2 ohm IDQ V.4 Series Subwoofer | Mica-reinforced polypropylene cone woofer | Parabolic roll surround | Ability to custom match the basket color to your personal installation | Conex spider with integrated tinsel leads | New V4 Metal Basket | High-temperature aluminum voice coil | Proprietary voice coil attachment design.
  • Power Handling: Peak: 1000 watts | RMS: 500 watts | Recommended Power Range: 50-500 watts.
  • Nominal Impedance (IMP): Dual 2 Ω | DC Resistance (Re): 1.85 Ω | Resonance Frequency (Fs): 31.77 Hz | Equivalent Volume (Vas): 44.71 L | Electrical Q Factor (Qes): 0.79 | Mechanical Q Factor (Qms): 2.90 | Total Q Factor (Qts): 0.62 | Peak Excursion (Xmax): 28 mm | Piston Area (Sd): 383.58 cm2 | Sensitivity: 84.50 dB 1w/1m.
  • Sealed Enclosure Suggestion: 1.1 cu.ft. | Ported Enclosure Suggestion: 1.45 cu.ft. | Displacement: 0.07 cu.ft. | Mounting Depth: 5.81 in | Outside Diameter: 11.04 in | Cutout: 9.57 in.
Check Stock

WeldingStop 9-0096 9-0093 Plasma SL40 torch for Thermal Dynamics CutMaster 42 Cutter 20pcs

  • Suitable for Thermal Dynamics CutMaster 42 Plasma Cutter (Ref. 1-4200) SL40 Torch (Ref. Code 7-0040).
  • 10 pieces x 9-0096 Plasma Cutting Electrode (NOT Thermal Dynamics 9-0096 Original).
  • 10 pieces x 9-0093 Plasma Cutting 40A Drag Tip (NOT Thermal Dynamics 9-0093 Original).
  • Nozzle Style: 40A Cutmaster 42 plasma drag tip.
  • These electrodes and tips are replacement parts which can be fit in SL40 torch, and these cutmaster 42 consumables are made by WS, not original.
Check Stock

Focal Access 165 A3 6.5-Inch 3-Way Component Speaker Kit

  • Focal ISS-200 8" 2-Way Component Speakers System | Component speaker system includes two 8" woofers and 2 tweeters | Power Handling: Max: 160 Watts |....
  • Dynamics and neutrality | Woofer: 8" (200mm) | Polyglass woofer with butyl rubber surround | Partial horn loading tweeter | Built-in crossovers |....
  • Compact tweeter size | 4-ohm impedance | Woofer Grilles NOT Included | Sensitivity: 91.4 dB | Frequency Response: 40Hz - 20kHz | Shallow mounting....
  • What's in The Box?: Two 8" Woofers | Two inverted dome tweeters (with 5" length of speaker wire attached) | 2 Surface mount tweeter housings....
  • 2 Foam woofer gaskets | 8 Speed clips | Four 7/8" Flathead screws | Eight 1" Self-tapping screws | Owner's manual (English/ French) | Focal window....
Check Stock

IDQ10 V.4 D2 - Image Dynamics 10" 1000W Peak Dual 2-Ohm IDQ V.4 Series Subwoofer

  • 12" Dual 4 ohm IDQ V.4 Series Subwoofer | Mica-reinforced polypropylene cone woofer | Parabolic roll surround | Ability to custom match the basket color to your personal installation | Conex spider with integrated tinsel leads | New V4 Metal Basket | High-temperature aluminum voice coil | Proprietary voice coil attachment design.
  • Power Handling: Peak: 1000 watts | RMS: 500 watts | Recommended Power Range: 50-500 watts.
  • Nominal Impedance (IMP): Dual 4 Ω | DC Resistance (Re): 2.90 Ω | Resonance Frequency (Fs): 30.19 Hz | Equivalent Volume (Vas): 68.93 L | Electrical Q Factor (Qes): 0.61 | Mechanical Q Factor (Qms): 4.67 | Total Q Factor (Qts): 0.54 | Peak Excursion (Xmax): 28 mm | Piston Area (Sd): 519.45 cm2 | Sensitivity: 86.80 dB 1w/1m.
  • Sealed Enclosure Suggestion: 1 cu.ft. | Ported Enclosure Suggestion: 1.5 cu.ft. | Displacement: 0.10 cu.ft. | Mounting Depth: 5.91 in | Outside Diameter: 12.46 in | Cutout: 10.87 in.
Check Stock

[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 | HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

  • [IMPROVED FREQUENCY ALGORITHM: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.
  • [MULTIPLE FUNCTIONS] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software.
  • [STRONG AND SECURE POWER SUPPLY] This VNA is battery powered or USB powered.
  • Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source..
  • Package include NanoVNA host (with battery) display: 2.8 inch TFT x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1.
Check Stock

Whizzer Kylin HE03D High Performance LDC Diaphragm Dynamic Driver(1DD) 6N OCC Cables IEMs in-Ear Earphone

  • HE03D is equipped with a 12mm DLC dynamic driver and 6N OCC cable, providing a larger soundstage and guaranteeing more detailed dynamics.
  • Based on the powerful sound dynamics of the 12mm DLC diaphragm moving coil unit, the semi-open rear chamber structure, which allows for better pressure relief, makes for excellent and natural sound dynamics..
  • HE03D uses a complex process to create an all-metal cavity that is ergonomic while also taking into account aesthetic design, combining metal and glass in an organic way while providing you with a wonderful sound experience.
  • Balanced tuning and Whizzer's signature warm, natural sound.
  • Three pairs of eartips and Pretty Vegan Leather Box.
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

Jim Dunlop Electric Guitar Strings (DPS08)

  • 8 Gauge Plain Steel Electric Guitar E String, Extra Light (Single).
Check Stock

On-Stage WCB100 Wood Cajon Brushes

  • Rubber rings adjust bristle spacing for louder or softer dynamics.
  • Longer handle for better control with an overall length 14.5".
Check Stock