Reviews Igbt Plasma Cutter

2021 UltraArc 205 200 Amp Multi Process Welder TIG Stick Pulse 50 Amp Plasma Cutter Dual Voltage 110v/220v

  • UltraArc 205 model with PULSE , Welds Steel, Stainless Steel and Titanium.
  • IGBT inverter technology, NEW digital interface.
  • 200A TIG / 200A STICK / 50a PLASMA CUTTER COMBO / 5 years waranty.
  • Great Arc stability for TIG/Stick functions due to IGBT inverter design.
  • 1/2" weld on DC TIG, 1/2" cut on Plasma, Dual Voltage 110v/220v.
Check Stock

2021 Everlast PowerPro 205Si 200a AC DC TIG 50a Plasma Cutter Multi Process Welder PP205si

  • Lightweight and portable AC DC WELDER WIT PULSE AND CUTTER.
  • IGBT Infineon Modules , inverter technology.
  • 200A AC DC TIG / 200A STICK / 50a PLASMA CUTTER COMBO.
  • Good duty cycle ratings for TIG, Stick, and Plasma.
  • Low dross cuts on steel up to 5/8" with up to 3/4" maximum capacity (under ideal conditions).
Check Stock

Pilot Arc Plasma Cutter 50A Dual Voltage 110/220V Non-Touch Plasma Cutter Cutting Machine Air Inverter DC 1/2 Inch 12mm Clean Cut With Upgrade P80 Cutting Torch Plasma Cutting Equipment

  • Pilot Arc Non-touch Plasma Cutter Machine: The pilot arc cutting machine can effectively cut through rough, painted, and rusted surfaces and produce the least slag. The pilot arc technology allows you to cut without touching the metal. So it provides a better cutting quality and longer life for consumables..
  • Upgrade IGBT Technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. At the same time, it can effectively save energy and improve the life of the machine..
  • 50Amp Dual Voltage 110/220V Machine: Output Current [email protected].
  • [email protected] and effective cutting thickness: 1/2 Inch (12mm).
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz).
  • Dimensions: 15.7" X 10.2" X 13.4" (40*26*34 CM).
  • Wide Application: The plasma cutter CUT50P suitable for cut aluminum, stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials. Designed for both demanding industrial and construction work, or home and hobby use..
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ✅ 【High-Frequency Cut】Professional Plasma Cutter,high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-....
Check Stock

50Amp Plasma Cutter Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110/220V CUT55P 50A Plasma Cutting Equipment, DC Inverter Portable Plasma Cutter Machine, IGBT Digital Display 1/2 Inch Clean Cut

  • Pilot arc: our cut55p is pilot arc plasma cutter machine and equipment the P-80 plasma cutting torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag.
  • Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Outstanding cutting performance: the DC inverter cutting machine suitable for cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding DIY and outdoor work, or home and hobby use..
  • Equipped with IGBT technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. IGBT machine is far superior and more stable than the MOSFET machine. Can effectively save 30% of energy..
  • 12mm Cutting thickness: Ideal cut thickness 1/2" (12mm), automatic dual voltage / dual frequency (110V/220V 50/60Hz). Voltage compensation to tackle with +/-15% electricity fluctuation. In addition our machines provide plugs that require manual installation..
  • What you get: cut55p x1, p80 plasma torch & accessories, user guide, 12 month guarantee..
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock

YESWELDER Plasma Cutter Dual Voltage 110/220V,45 Amp Non-Pilot Arc Digital Display IGBT Portable plasma cutter machine with accessories

  • High-Frequency Cut: The high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition. Ideal Clean Cut 1/8"@110V,5/16"@220V.
  • Lightweight and Portable: It is convenient to do home DIY and general repairing work. Dimension: 14.8"(L)x 6.5"(W)x 12.0"(H). Weight: 11lb.
  • Widely Applied IGBT Inverter: It adopts IGBT inverter technology, features with current control, high quality and stable performance, suitable to cut stainless steel, alloy steel, mild steel, copper, etc..
  • Dual Voltage:It allows the machine to run directly on 110 V 50/60 Hz power or on 220 V 50/60 Hz with the use of a power adapter. Suitable home DIY and industrial projects..
  • Multi-protection in One Cutter: With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional way..
Check Stock

2021 PowerPlasma 62i 60 Amp CNC compatible plasma cutter

  • Comes with Blow Back IPT-60 plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 60AMP Inverter Type cutter @ 60% duty cycle — 5 Year Warranty (Parts and Labor).
Check Stock

2021 PowerPlasma 82i 80 Amp plasma cutter with CNC Package

  • Comes with Blow Back IPT-80M machine plasma cutting torch.
  • IGBT Infineon Modules / Inverter technology.
  • 80AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1″.
  • MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4″.
Check Stock

2021 PowerPlasma 102i 100 Amp CNC compatible plasma cutter

  • Comes With Blow Back IPT-100 plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1 5/8″.
Check Stock

2021 PowerPlasma 82i 80 Amp CNC compatible plasma cutter

  • LIMITED TIME OFFER / COMES WITH BLOW BACK IPT-80 plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 80AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1″.
  • MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4″.
Check Stock

2021 PowerPlasma 102i 100 Amp plasma cutter with CNC Package

  • Comes With Blow Back iPTM-100 CNC machine plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • Up to 1 1/8″ clean cut with CNC (edge start).
  • Pierce up to 5/8″-3/4″ with auto THC.
Check Stock