Reviews Igbt Modules

2021 PowerPlasma 82i 80 Amp plasma cutter with CNC Package

  • Comes with Blow Back IPT-80M machine plasma cutting torch.
  • IGBT Infineon Modules / Inverter technology.
  • 80AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1″.
  • MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4″.
Check Stock

2021 PowerPlasma 102i 100 Amp CNC compatible plasma cutter

  • Comes With Blow Back IPT-100 plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1 5/8″.
Check Stock

2021 PowerPlasma 82i 80 Amp CNC compatible plasma cutter

  • LIMITED TIME OFFER / COMES WITH BLOW BACK IPT-80 plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 80AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1″.
  • MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4″.
Check Stock

2021 PowerPlasma 102i 100 Amp plasma cutter with CNC Package

  • Comes With Blow Back iPTM-100 CNC machine plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • Up to 1 1/8″ clean cut with CNC (edge start).
  • Pierce up to 5/8″-3/4″ with auto THC.
Check Stock

2021 PowerTIG 250EX AC/DC Pulse TIG Stick Welder IGBT 1 or 3 Phase 220v

  • IGBT Power Modules increase reliability and performance.
  • Low 5 amp Start for TIG in AC and DC modes (+/- 2 amps).
  • 2T/4T amp/slope parameters for welding with torch switch.
  • Pre flow and Post flow control for maximum shielding gas protection before and after.
  • Improved HF start circuit for reduced maintenance issues.
Check Stock

2021 PowerPlasma 62i plasma cutter Inverter Type Cutting System 60amp with CNC Package

  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics.
  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals.
  • Adjustable postflow timer for maximum consumable life.
  • Suitable for use with 11,000 W “clean power” generators..
  • IGBT modules from Infineon (Siemens) improve reliability and performance while reducing overall weight.
Check Stock

2021 Everlast PowerPro 205Si 200a AC DC TIG 50a Plasma Cutter Multi Process Welder PP205si

  • Lightweight and portable AC DC WELDER WIT PULSE AND CUTTER.
  • IGBT Infineon Modules , inverter technology.
  • 200A AC DC TIG / 200A STICK / 50a PLASMA CUTTER COMBO.
  • Good duty cycle ratings for TIG, Stick, and Plasma.
  • Low dross cuts on steel up to 5/8" with up to 3/4" maximum capacity (under ideal conditions).
Check Stock

2021 PowerTIG 315LX 315 Amp AC/DC Pulse TIG/Stick Welder 240v Single Phase

  • Infineon IGBT Power Modules increase reliability and arc performance / 10 amp DC and 20 amp AC minim.
  • Pre flow and Post flow control of maximum shielding gas protection before and after the weld.
  • Pulse up to 750 Hz for maximum arc and heat control / HF or Lift TIG start with improved HF start ci.
  • Weld aluminum to a maximum of 5/8" single pass / Weld steel to a maximum of 1+" multi-pass.
Check Stock

Smalloo 1.2'×80ft Double Side Adhesive Thermal Conductive Cooling Tape for Heatsinks, LED Lights, IC Chip, Computer CPU, GPU, Raspberry pi, Modules

  • The 1.2"×80ft(wideth×length) double side adhesive thermal conductive tape for heatsink, like heatsink for LED, IGBT, IC Chip, Computer CPU, GPU, Modules, Raspberry pi, Electrically Insulated..
  • The thermal conductive cooling tape thermal conductivity: glass fiber thickness 0.2mm, 1.5 W/m-k. Long term heat resistant 120°C, short term heat resistant 180°C.
  • The thermal adhesive with the features of high thermal conductivity, insulation, strong stickiness, softness, compression..
  • The thermal adhesive tape is simple and practical , Combined with thermal paste, the effect will be better and very easy to use..
  • Double-sided thermal adhesive tape at low cost solve the problem of heat dissipation, it is great helper to solve heat dissipation for many electronics products..
Check Stock

Component Tester Kit

  • supported components: BJT, JFET, E-IGBT, D-IGBT, E-MOS, D-MOS, resistors, coils, capacitors, and diodes.
  • resistance resolution: 0.1 Ohm (max. 50 MOhm).
Check Stock

SUNGOLDPOWER ARC MMA 200A Welder Dual 110V 220V IGBT Hot Start Welding Machine DC Inverter Welder 200 AMP LCD Anti-Stick

  • Please Note: some cheaper welders are only about 7-10lbs, looks like a toy.
  • however, SUNGOLDPOWER welder is heavier than others, because SUNGOLDPOWER welder is full-bridge welder (many cheap welders are half bridge welder), we use more high quality components to support its perfect working and long-life time..
  • 2.Advanced control module IGBT dual 110V and 220V, improves the performance of the welding machine. IGBT MMA welder adopting advanced full bridge IGBT inverter technology.
  • 3. Anti-sticking preventing against over loading the unit easing removal of the electrode,thermostatic control,fan cooled carrying strap and handle..
  • 4. Hot start, arc force overload protection：over-voltage protection, under voltage protection, over current protection, over load protection.
  • 5. Supplied complete with AC Plug，electrode holder and cable, earth clamp and cable, Complete package..
Check Stock

DEKO 135Amp MIG/MMA Welder,DC Inverter Digital Welding Machine,110V Welder Machine with Wire Brush,Earthing Cable,Electrode Holder,Welding Gun,Digital Display Meter

  • 【POWERFUL&lIGHT WEIGHT】The 135Amp powerful MIG welder is capable of welding various metals, and the machine's welding properties are optimum with....
  • 【MULTI-FUNCTIONAL】The spot welder is suitable for a range of different purposes and the possibility to use a long extension cord eases operation....
  • 【IGBT Technology】IGBT intelligent inverter technology. IGBT power device with unique control mode improves the reliability of welding machine. The....
  • 【SAFTY】The welding gun has an overheating protector which prevents operation when the machine is overheated. The stick welder is also protected....
  • 【EASY-TO-USE】The welders are amazingly easy to use. Suitable for home use，and it was simple to set up and start welding. You could literally....
Check Stock

Kammas 10pcs/lot 100% Best Quality GT50JR22 50JR22 TO-3P 50A 600V Power IGBT transistor

  • 10pcs/lot SGH40N60UFD TO-247 SGH40N60 40N60 IGBT transistor Dis High Perf IGBT.
Check Stock