Reviews Idler Arms

Proforged 102-10074 Idler Arm - Power Steering

  • 1,000,000 MILE WARRANTY. You can install our idler arms with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • CRAZY STRONG IDLER ARMS. Proforged idler arms are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance idler arms: Proforged..
  • WHAT IS AN IDLER ARM? A idler arm is part of your vehicle’s steering system - it connects to your center link for support, pivoting as your wheels turn. Idler arms ....
Check Stock

Proforged 102-10020 Greasable Front Right Idler Arm - RWD

  • 1,000,000 MILE WARRANTY. You can install our idler arms with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • CRAZY STRONG IDLER ARMS. Proforged idler arms are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance idler arms: Proforged..
  • WHAT IS AN IDLER ARM? A idler arm is part of your vehicle’s steering system - it connects to your center link for support, pivoting as your wheels turn. Idler arms ....
Check Stock

Proforged 102-10019 Greasable Front Left Idler Arm - RWD

  • 1,000,000 MILE WARRANTY. You can install our idler arms with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • CRAZY STRONG IDLER ARMS. Proforged idler arms are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance idler arms: Proforged..
  • WHAT IS AN IDLER ARM? A idler arm is part of your vehicle’s steering system - it connects to your center link for support, pivoting as your wheels turn. Idler arms ....
Check Stock

Detroit Axle - 8 Lugs Front Wheel Hub Bearing + Upper Control Arm w/Ball Joint Suspension Kit Replacement for Silverado Sierra 2500 3500

  • Replacement for 4WD & 3-Groove Pitman Arm Models.
  • Idler Arm Does NOT fit models with Rack & Pinion Steering.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Wheel Hubs & Bearings + 2x Front Upper Control Arms w/ Ball Joints + 2x Front Lower Ball Joints + 2x Front Sway Bars + 4x Outer & Inner Tie Rods + 1x Idler Arm + 1x Pitman Arm + 1x Idler Arm Bracket Assembly.
  • Hub Specifications: Position: Front | Lugs: 8 Bolt | ABS Type: Sensor Wire | Flange Type: 4-Bolt Square.
Check Stock

Detroit Axle - 4WD Power Steering Gearbox Idler & Pitman Arms Tie Rods Replacement for Silverado Suburban Avalanche Sierra 1500 Escalade - 8pc Set

  • Fits 4WD Models with Torsion Bar Suspension.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 1x Power Steering Gearbox + 2x Idler & Pitman Arms + 4x Inner & Outer Tie Rods + 1x Front Idler Arm Bracket.
  • To Activate your Lifetime Warranty, you must send in your core unit. Call us when you order to get a return shipping label for your old unit.
Check Stock

Idler Pulley for Poullan Ayp Dixon Craaftsman Husqvaarna 532173437 173437 165888

  • Idler sprockets, flat idlers and idler bushings contain sealed ball bearings and an integral shaft for mounting to adjustable idler brackets.
  • Lubrication and maintenance are not required.
  • Idler assembly may consist of: idler sprocket and bracket, flat idler and bracket, standard sheave or sprocket used with an idler bearing and idler bracket.
  • Package Dimensions: 17.78 L x 19.05H x21.082W(centimeters).
Check Stock

Detroit Axle - 4WD Front Ball Joints + Sway Bars + Tie Rods Suspension Kit Replacement for Cadillac Chevy GMC Escalade Yukon Tahoe K1500 K2500 K1500 Suburban - 15pc Set

  • Replacement For 4WD Models w/45.79mm Diameter Lower Ball Joint.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: (2) Front Upper Ball Joints, (2) Front Lower Ball Joints, (2) Front Sway Bar Links, (2) Outer Tie Rods, (2) Inner Tie Rods, (2) Tie Rod Adjusting Sleeves, (1) Pitman Arm, (1) Idler Arm and (1) Idler Arm Bracket.
  • Detroit Axle Suspension parts are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs.
Check Stock

Detroit Axle - 2WD Front Upper Control Arms w/Ball Joints + Sway Bars + Tie Rods + Pitman Idler Arms Replacement for Ford Expedition F-150 F-250 Lincoln Navigator - 12pc Set

  • 2-Wheel Drive Models Only (2WD)**There are two different versions of idler arm for these vehicles. This kit provides an idler arm with a 2.5" bolt....
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Lower Ball Joints + 2x Front Upper Control Arms w/ Ball Joints + 4x Front Outer Inner Tie Rod Ends + 2x Front Sway Bar Links +....
  • Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.
Check Stock

CAREFREE Longitude 12V RV Awning Arm Set-Black (87JVAP)

  • Pt# 87JVAP Carefree longitude Arm set is an identical replacement for factory oem installed longitude arms-these are replacement arms and are an exclusive fit to the longitude RV awning roller and therefore cannot be used to upgrade manual awnings to electric..
  • Features six position Pitch adjustments from a steep Pitch to a flat Pitch. Self Leveling retraction with Pitch memory. Single switch operation. Includes pre-installed mounting screws..
  • Arm mounting rail measures 55.9" Tall, Arm depth is 3" And arm Width measures 2.6". Front Arm includes the motor, back arm includes the idler..
  • Not compatible with any other make or model of RV awning-longitude exclusive fit..
Check Stock

BBR Tuning 10T Billet Precision Bearing Idler Sprocket

  • BETTER CHAIN ALIGNMENT: No more chains coming out of alignment or coming out from your idler wheel. This 10 Tooth sprocket locks your chain on your idler with minimal resistance because of the precision high grade bearings..
  • LONG LASTING: The BBR Tuning 10 Tooth Billet Aluminum Pulley Idler is designed to out last those standard plastic pulley wheels and.
  • EASY INSTALLATION: Installation is a breeze: uninstall your idler roller from your chain idler pulley, replace with this idler sprocket, install your chain, and you're ready to roll.
  • UNIVERSAL FIT: Compatible with 415 heavy duty bicycle engine chains, regular and spring chain tensioner..
  • PACKAGE INCLUDES: 1x BBR Tuning 10 Tooth Billet Aluminum Sprocket with Bearing, 1x Mounting Nut and Bolt with Spacer and washer.
Check Stock

Aeromax Astronaut Boots, Size Medium, White, with NASA patches

  • Replacement for 1990-2005 Chevrolet Astro - [1990-2005 GMC Safari] - All 2WD Models ONLY.
  • Kit Includes:2x Idler Arms, 2x Adjusting Sleeves, 4x Inner Outer Tie Rods, 4x Upper Lower Ball Joints.
  • Detroit Axle Suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
Check Stock

Detroit Axle - 17pc Front Upper Lower Control Arms, Wheel Hubs, Inner Outer Tie Rods, Center Sway Bar Links, Pitman Idler Arms for 2000-2003 Ford F-150 4WD w/ 3.43″ Bolt Pattern 5 M14 Studs w/ABS

  • Kit Includes:4x Front Control Arms, 4x Front Tie Rods, 2x Front Adjusting Sleeves, 2x Front Sway Bar Links, 2x Front Wheel Hub & Bearings, 1x Front Center Link, 1x Front Pitman Arm, 1x Front Idler Arm.
  • Flange Type: 3-Bolt Triangular | Lug Count: 5 | Abs Type: Sensor Wire.
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality.
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock