LSAILON 2H1296 Equipment Fuel Injection Idle Air Control Valve Compatible with Alfa Romeo 164/ Spider/Fiat Uno, Peugeot, Saab 900/9000, Volvo 240/244/245/740/ 760/780/ 940/ S70/ V70
- COMPATIBILITY INFORMATION：New Idle Speed Control fit for 1991-1993 Alfa, Romeo 164, 1990-1994 Alfa Romeo Spider, 2013-2015 Fiat Uno, 2015 Peugeot 2008,2014 Peugeot 207, 2014-2015 Peugeot 208/ 208 GT, 2011-2015 Peugeot 3008, 2012-2015 Peugeot 508, 1988-97 Saab 900, 1990-1991 1994-1997 Saab 9000, 1990-93 Volvo 240, 1989 Volvo 244/245, 1989-1992 Volvo 740, 1990 Volvo 760, 1990-1991 Volvo 780, 1991-1995 Volvo 940, 1998-00 Volvo S70/ V70.
- THE MEANING OF IAC MOTOR: Idle speed control is to control the amount of idle air. Apart from stabilizing the basic idle speed, it also simplifies the intake system.Operating accurately, simple installation..
- IAC MOTOR PARAMETER: The idle air control motor Kit with Interchange Part Number:2H1296, AC4158, 1389618, 1389618-0, 1398618, 4503363, 7586019, 60513207, 6081337, 3450181.Before purchase this parts, Please verify the correct OEM part number..
- PREMIUM FEATURES: The purpose of the idle speed control is to keep the engine idle speed as low as possible while ensuring the engine emission requirements and the operation is stable, so as to reduce the fuel consumption at idle speed..
- BUYER NOTICE: Please use the compatibility chart below to double check if these will work for your car.We provide ONE YEAR WARRANTY for all our ....
Check Stock08-0045 Idle Screw Adjuster Kit for Yamaha YFS200 Blaster YFZ350 Banshee 1987-2006
- Fitment - 08-0045, Idle screw kit for Yamaha 1988-2006 YFS200 Blaster.
- Fitment - 08-0045, Idle adjuster kit for Yamaha 1987-2006 YFZ350 Banshee.
- Kit Includes - a drill bit (#6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts.
- Please Note - Installing this kit requires drilling and tapping the carburetor body.
- Service - We offer idle screw adjuster tool 12 month service, any questions about idle screw adjuster tool, please contact us by email, we will reply....
Check StockOCPTY 2H1094 Idle Air Control Valve FIT for Jeep for Cherokee 4.0l 1998-2001 for Jeep for Grand Cherokee 4.0l 1998-2004 for Jeep for Wrangler 4.0l 1998-2004
- FITMENT:Idle Air Control Valve fit 1999-2002 for Dodge for Dakota 2.5l, 1999-2002 for Dodge for Dakota 3.9l, 2000-2001 for Dodge for Dakota 4.7l,....
- ECONOMY: Good fuel economy is achieved by maintaining minimum idle speed and deceleration air volume control.Improve engine performance by increasing....
- REFERENCE OEM PART NUMBER：Fuel Injection New Idle Air Control Valve for 2171783, 229571, 22969, 4874373, 4874373AB, 53030821, AC327, AC176, 2H1094.
- INCREASE THE SPEED:The ECU controls the idle speed control valve to increase the air amount, thereby increasing the idle speed and protecting the....
- ATTENTION:Please check the part number before purchasing to ensure fitment and Check for proper operation with each tune-up and replace when trouble....
Check StockTFCFL 100CC 2-Stroke Bicycle Gasoline Engine Motor Kit, Bike Bicycle 44 Tooth Motorized Petrol Gas Motor Engine Kit
- The 100CC bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle. Comes with all needed accessories for easy installation..
- Low fuel consumption, 150 miles per gallon, very energy efficient and economical. Engine requires 8oz 2 Stroke oil per gallon of gas during Break In Period.Suitable for most 26" /28"bikes..
- Upgraded Tunable High Performance Carburetor. Features: Choke lever on the handlebars, Main jet. (Can be re-jetted), Pilot jet, Copper oil needle, Idle RPM Screw, Idle Air Screw that delivers more fuel with the choke on, instead of restricting air..
- 50mm bore single piece cylinder/head (increased weight capacity, lower operating temps, easier starting, sustained power output across varied rpm range).
Check StockCreative Plastic Bottle Cutter Tool ver.5 Made of Metal Rope Making Tool Heat Shrink Tape Extractor - get Free Rope from Wasted PET Bottles Reuse and Upcyle Plastic Waste Tool with 1 blade
- CONVERTS YOUR WASTE INTO USEFUL THING! Get rid of Idle plastic bottles stock by upcycling your plastic bottle waste into a useful rope or band. If you....
- EXTRACTS FREE PLASTIC ROPE or HEAT SHRINK BAND. Get a firm and weatherproof rope of variable width by cutting empty plastic bottles. The tool has 9....
- SOURCE of LONG-LASTING and FIRM MATERIAL for HOME / GARDEN / DIY / SURVIVAL needs. Raw material may be picked up just from the ground for NO COST..
- DURABLE CONSTRUCTION. It's NOT a 3D-printed toy. This Cutter Tool is made of Solid Metal - NO PLASTIC OR WOODEN details. Won't brake after just a....
- MINI-SIZED and LIGHTWEIGHT! No problem at all to just have it in your backpack or on shelf. Designed to be fastened to applicable surface with screws,....
Check StockRTFMUCA 01-0390 Throttle Cable Kit for Yamaha Blaster 200 1988-2006 with Carb Cap and Idle Adjuster Screw Removal Eliminator Kit
- For use on Yamaha Banshee and Blaster models.
- Used to install a standard Mikuni idle adjuster into the carburetor body.
- Idle adjuster is necessary if carburetor top has been replaced with a standard Mikuni cap.
- Kit includes a drill bit (#6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts and instructions.
- Drill press or mill should be used to drill holes in the carburetor bodies.
Check StockAutolite 1100 Carburetor & Manual Choke 1963-1969 Mustang Falcon 200 Ci inline 6-cylinder automatic transmission F100 series truck 223 262 CI engines
- The new carburetor has gone through many strict test procedures. We have tested the leakage, idle speed and other test items to ensure that the carburetor at the factory is suitable for fully qualified..
- Truck F100 straight-6 engine 223 cu in (3.7 L).
- Truck F100 straight-6 engine 262 cu in (4.3 L).
- Mustang straight-6 engine 200 cu in (3.3 L).
- When installing the carburetor, only adjust the air mixing screw on the base. If the idle speed needs to be adjusted, adjust the idle screw.
Check StockJEGS Small Block Chevy 1996-2002 Intake Manifold | For Use With Vortec Cast Iron Cylinder Heads | Non-EGR | Idle - 5500 RPM Power Range | Black Cast Aluminum | Square Bore Mounting Pad
- IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
- DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
- FABRICATED FROM BLACK CAST ALUMINUM for weight savings, great looks, and improved performance.
- FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002.
- IDLE TO 5500 RPM POWER BAND for street or mild race applications.
Check StockTestor Corp 3527C Non-Toxic Cement w/Applicator 1oz
- Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure....
- Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and....
- Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
- Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
- INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry....
Check Stock
Satellite city CRK-H-SS super solvent 2oz debonder for CA GLUE
- Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure TM) and 2 ounce bottle of Accelerator (Insta-Set TM)..
- Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds..
- Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
- Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
- INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly..
Check StockJEGS Small Block Chevy 1996-2002 Intake Manifold | For Use With Vortec Cast Iron Cylinder Heads | Non-EGR Design | Idle - 5500 RPM Power Range | Polished Aluminum | Square Bore Carburetor Mounting Pad
- IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
- DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
- FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002.
- IDLE TO 5500 RPM POWER BAND for street or mild race applications.
- FABRICATED FROM CAST ALUMINUM for weight savings and improved performance and then polished for beautiful looks under your vehicle’s hood.
Check Stock85401-201 Edge Evolution CTS3 - 50 State Legal
- Change 5 power levels on-the-fly using +/- cruise control buttons.
- Connects directly to ECU in engine compartment providing instant power.
- Built-in throttle sensitivity control for improved throttle response.
- High-idle user settings to adjust RPM during idle.
- Transmission slip backdown power will decrease if slip is detected.
Check StockVito s Performance Idle Screw And Jamb Nut
- Applicable:Yamaha Banshee and Blaster models.
- Fit:1987-2006 Yamaha Banshee 350 YFZ350,1988-2006 Yamaha Blaster 200 YFS 200.
- install a standard Mikuni idle adjuster into the carburetor body.
- Kit includes:drill bit (# 6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts and instructions.
- replacing part:BA01-0511 / BA01-0513 throttle kits.
Check Stock
