Reviews I o Expansion Boards

AITRIP 10PCS PCF8574 PCF8574T IO Expansion Board I/O Expander I2C Evaluation Develop Module

  • The PCF8574 IO Expansion Board provides general-purpose remote I O expansion via the two-wire bidirectional I2C-bus (serial clock (SCL), serial data (SDA)..
  • The main resources: PCF8574, I2C interface, the 8-bit parallel.
  • Typical applications: for I / O resource constraints the MCU I / O expansion.
  • PCF8574T expansion board applicable to a variety of platforms including AVR / ARM.
  • PCF8574T PCF8574 IO expansion board support I2C bus cascade (by pin header row seat docking methods can be used simultaneously multiple I2C modules).
Check Stock

Teyleten Robot IR Infrared Slotted Optical Optocoupler Module Speed Measuring Sensor 3.3V to 5V Photo Interrupter Sensor for Arduino（5pcs）

  • use: 1. +5 +5 is the positive input port of the power supply, which can be connected to a voltage of 3.3V~5V.
  • 2. GND GND is the negative input port of the power supply. OUT OUT is the signal output port, which is connected to the I/O port of the single-chip....
  • For other main control boards or higher-level main control boards (such as Arm), if you need to set the I/O port to input/output mode, you must set it....
  • Note: For Arduino players should set the MCU's I/O port to input mode/receive mode, otherwise it cannot be used..
Check Stock

Anime Computer Case ATX Mid Tower PC Gaming Case - Front USB Port - Quick-Release Tempered Glass Side Panel - Cable Management System - Water-Cooling Ready - Pink,A,

  • [Powerful cooling ]-- C580 PC case is pre-installed 2 RGB luminous light boards. The unique open design can keep the GPU Temperature continuously low,making your computer work more smoothly..
  • [2 Tempered glass]-- C580 gaming case is equipped 2 * 4mm thick tempered glass, which can clearly see the RGB lighting and the components in the building, Creating a good gaming atmosphere..
  • [SYNC RGB]-- KEDIERS Tower Case light boards can be controlled by computer software/remote control (equipped)..
  • [I/O Panel]-- 2 x USB3.0 Port, 1 x USB2.0 Port, 1 x HD Audio, Power Button..
  • [Cable Management]-- Back Bays: 1x 3.5'' HDD's and 2 x 2.5'' SSD's. Removable storage cable box.
  • [Remarkable Expansion]-- C580 Mid Tower Gaming Computer Case supports ATX/Micro-ATX/Mini-ITX motherboards..
Check Stock

IN WIN 350W TAC 2.0 MicroATX Mini Tower Case Z589.CH350TB3 Black

  • Expansion slots: 4x PCI-E expansion Slots.
  • Cooling system: 1x 80 or 90mm rear fan vent (fan not included).
  • Front I/O panel: 2x USB 3. 0 Ports, HD Audio.
Check Stock

Dell Networking N4032F 24P SFP+ 10GbE RA Switch N4032F (Renewed)

  • Manufacturer: Dell Model: N4032F Switch Size: 1 RU Ports: 24 x 1/10GbE SFP+ Uplink Speed: Network Module Required Additional Ports: 1 x Rear out-of-band 10/100/1000 management port, 1 x USB Type-A, 1 x RJ45 Manage port - RS232 signaling OS: OS6 Switch Includes: 2 x Hot-swappable 460W AC Standard Airflow (I/O to PSU) PSUs. 2 x Standard Airflow (I/O to PSU) Fans. 1 x Hot-swappable expansion module bay (Networking module not included). Ready Rails kit included. N4032F.
  • All Prime orders ship same day if purchased by 2pm EST, Monday through Friday.
  • No-Nonsense Next Business Day Warranty on most servers and parts.
  • Please contact xByte Technologies for questions about expedited shipping, item description, product condition, or warranty.
  • xByte Technologies is a premier reseller of IT equipment with a history of quality service for over 16 years.
Check Stock

Waveshare OpenH743I-C Package B with 7inch Capacitive Touch LCD (F) The STM32 Development Board Designed for The STM32H743IIT6 Microcontroller

  • OpenH743I-C is an STM32 development board designed for the STM32H743IIT6 microcontroller, consists of the mother board and the MCU core board CoreH743I..
  • The OpenH743I-C supports further expansion with various optional accessory boards for specific application..
  • The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers..
  • The OpenH743I-C does NOT integrate any debugging function, a debugger is required..
Check Stock

Audio Money (Mixed)

  • 96kHz XCVI FPGA core, less than 0.7ms Latency with all processing enabled.
  • 48 Input channels, 12 Stereo mixes + LR, 3 Stereo Matrix.
  • 16 onboard preamps, 17 faders, Rackmountable 19-inch, 8 SoftKeys.
  • Access to DEEP plug-ins, Automatic Mic Mixing, 8 Stereo FX engines + dedicated returns.
  • I/O Port for expansion and system compatibility, AES and XLR outputs, 7” capacitive touchscreen.
Check Stock

X58 PC Motherboard for Intel X58, 2 x DDR3 Motherboard LGA1366 Pins，Gaming Motherboard Support ECC Memory USB2.0 SATA Port Motherboard for Desktop PC

  • 【CPU SLOT LGA1366】X58 computer motherboard with CPU slot LGA 1366, support 1 CPU, plug in the power supply, CPU, hard disk, memory, and display to use. X58 motherboard with integrated 6 channel sound card, network card, stable and high-speed transmission..
  • 【ALL SOLIDLY CAPACITOR & Rich EXPANSION SLOT】: All solidly capacitor design, the quality of the power supply cooling block is more stable and durable than ordinary capacitors. Expansion slot: 1xPCIE X16 graphics card slot.
  • 【SATA PORT & I/O INTERFACE】: PC motherboard supports SATA port, Multi I/O interface: PS/2 Interface : PS/2 Keyboard and Mouse General Interface.
  • Audio Interface which is compact and easy to install. It is easy to use and has high compatibility..
  • 【PCB MATERIAL&GUARANTEE】: One 8 pines power socket, one 24 pin power connector, made of high quality PCB material, with high performance and stable performance. This X58 Motherboard LGA1366 has a complete service, if you have any questions about the product or you are not satisfied, please contact us at any time, we will provide you with the best solution.Your satisfaction is our main concern..
Check Stock

Cooler Master HAF XB EVO - High Air Flow Test Bench and LAN Box Desktop Computer Case with ATX Motherboard Support

  • A case quickly and easily transforms into a test bench – ideal for enthusiasts and over clockers.
  • Two durable trifle fans included in the front (also supports a 240mm radiator) for powerful airflow.
  • Supports a tower CPU coolers up to 180mm tall and high-end VGA up to 334mm long.
  • Supports up to 4 HDDs or SSDs by removable HDD cages.
  • Motherboard tray can be removed to install, remove or swap components.
  • Dual USB 3. 0 SuperSpeed ports and X-dock slots in the front for Lightning fast plug-n-play I/O.
  • Case Type: Mid Tower, M/B Type: Mini-ITX, MicroATX, ATX.
  • Material: Steel, Polymer, Mesh Front Bezel.
  • Front I/O Panel: 2x USB 3.0 Ports, 1x Microphone-In, 1x Audio-Out.
Check Stock

| Continuous Power | Intel 4th Gen CPU Read, SLI & Crossfire Ready

  • Stylish and Neat Design for a computer gaming case: ROSEWILL NAUTILUS comes with a magnificent design with Blue LED fans in the front. It offers not only the ultimate gaming experience but also the supreme glance for your desktop..
  • Multiple I/O Ports and Tool-less Design docking station: With Top-mounted I/O Ports – USB 3.0 x 2, USB 2.0 x 2, Audio In/Out, the gaming mid-tower gives users the best convenience to their gaming system and the Tool-Less Design of 3.5″/5.25″ HDD station offers the ease of use to access the PC.
  • Dimension (H x W x D: inch/cm): 19.69 Inch x 7.64 Inch x 17.72 Inch.
  • Motherboard Compatibility: ATX, Micro-ATX, Mini-ITX.
  • Optimized Ventilation: 3 Pre-installed Fans, including two 120 mm Blue LED Fans in the Front and one 120mm Fan in the Rear offers excellent airflow makes it an outstanding ATX gaming case. Gamers can also install the CPU cooler up to 154 mm for your system.
  • Tremendous Expansion: Supporting up to 154 mm CPU Cooler, up to 380 mm Graphics Card and multiple PCI-E Slot (7) provides gamers more flexibility to upgrade their system for speedy and exciting practice..
Check Stock

Rosewill SCM-01B Black Steel/Plastic Micro ATX Mini Tower Computer Case

  • Front I/O Port: USB 3.0 x 1 + USB 2.0 x 2 + Audio In/Out.
  • Supports three Internal 3.5" Drives and one Internal 2.5" Drive.
Check Stock

Thermaltake Level 20 RS Motherboard Sync ARGB ATX Mid Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1P8-00M1WN-00

  • [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans + ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off.
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
  • [WINDOW PSU COVER] – Special ventilated design enhances airflow and hides unsightly cables.
  • [2+2+1 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Rack + 2 5" x 2 with HDD Bracket + 2 5"/3 5" x 1 behind MB Tray.
  • Supports Mini ITX Micro ATX ATX Motherboard.
  • I/O Port - USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
  • OUTSTANDING EXPANSION - Max CPU Cooler Height 172mm / Max VGA Length 282mm (With Reservoir) 400mm (Without Reservoir) / Max PSU Length 220mm.
  • DIMENSION - 21 8" x 9 5" x 20 6" 27 lbs 3 Year.
Check Stock

Thermaltake V200 Tempered Glass RGB Edition 12V MB Sync Capable ATX Mid-Tower Chassis with 3 120mm 12V RGB Fan + 1 Black 120mm Rear Fan Pre-Installed CA-1K8-00M1WN-01

  • LIGHT UP THE SYSTEM: 3 pre-installed 120mm 12V motherboard sync RGB fans (Sync with ASUS, Gigabyte, MSI, ASRock, and Biostar 12V Header Mobo) + 1 black fan at back.
  • BUILT-IN DUAL-MODE 12V SYNC CONTROLLER: Control light via I/O Port RGB Light Button (16 LED modes/7 color) or via 12V header RGB sync motherboard (Sync with ASUS, Gigabyte, MSI, ASRock, and Biostar 12V Header Mobo).
  • 16 LED MODES THROUGH I/O PORT RGB LIGHT BUTTON: RGB Mode, Single Color Mode (7 Colors), Breath Mode (7 Colors), Light Off [7 Colors: Red, Yellow, Green, Cyan, Blue, White, Purple].
  • CLEAR VIEW OF PC GAMING: 4mm thick tempered glass side panel with standard mounting.
  • BUILT-IN PSU COVER: Cover all your cables for a Professional Look combined with a window to show off your Colorful power.
  • DRIVE BAYS: 3 x 2.5″ with HDD Bracket + 2 x 3.5″ with HDD Tray.
  • Supports Mini ITX, Micro ATX, and ATX Motherboard.
  • I/O PORT: USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, RGB Light Button.
  • OUTSTANDING EXPANDABILITY: 7 expansion slot. Max CPU cooler height: 160mm / Max VGA length: 380mm / Max PSU length: 170mm.
  • DIMENSION: 17.6″(H) x 8.3″(W) x 17.3″(D), 15.65lb.
Check Stock