Reviews Hydraulic Wrench

1266 Adjustable Gland Nut Wrench and 7463 Small Universal Gland Wrench Fit for Hydraulic Cylinders on Skid Steer Loaders, Most Farm and Construction Equipment (Pack of 2)

  • 【Widely Used】Fit for hydraulic cylinders on most farm and construction equipment, Case 480E/580/580D/580 SE/580 ck/180 Backhoe, Case 1150h dozer, Bobcat cylinders, Hyd Cyl and etc..
  • 【1266 Adjustable Gland Nut Wrench】Offers customized fit to the gland nuts from 2 inches to 6 inches diameter.
  • Reversible to fit 1/4 inch and 5/16 inch diameter pinholes (Similar to OTC 1266)..
  • 【7463 Small Universal Gland Wrench】Fit to the gland nuts from 1” to 3-3/4” diameter.
  • Reversible to fit 1/4 inch and 7/32 inch diameter pinholes(Similar to OTC 7463)..
  • 【High Quality】Hydraulic Cylinders wrench is CNC machined, high quality steel and black finish for strong durable finish, this tool kit ensures high strength, great tolerance and resistance to corrosion and rust, and features its durable construction and versatility..
  • 【Easy to Use】 Made an adjustment to the Gland Nut Wrench to fit the pinholes and then simply use with 1/2" drive ratchet(for 7463), 3/4 inch square drive(for 1266) and breaker bar to loose and remove gland nut..
Check Stock

Gimbal Bearing Installer Bearing Puller Remover and Engine Alignment Tools Set for Mercruiser for Alpha Alpha 1 for Bravo for MR for Volvo and for Omc (carbon steel)

  • COMPATIBILITY : Fit for all Yamaha Suzuki Johnson Evinrude Hydraulic Trim/Tilt Endcaps, also for All Seastar Hydraulic Steering End Caps..
  • REPLACEMENT: Equivalent Yamaha Factory Toosl: YB-06175-2B, YB-06175-1A, YB-06548..
  • STRENGTH: Trim and Tilt hydraulic pin wrench. MT0004 & MT0006 MIN Pin Strength is 180 ft-lb, MT0009 MIN Pin Strength is 200 ft-lb..
  • PACKAGE: Three of 1/2" socket drive, Pin Wrench with size of MT0004-38mm x 4mm, MT0006-32mm x 4mm/4.5mm and MT0009-35mm x 6mm.
  • MATERIAL: Made of high quality-42CrMo Steel to ensure resistance to corrosion and rust, protection and years of trouble-free use, also show superior durability and impact resistance. Guarantee with 12 months' warranty..
Check Stock

E-HEELP Electric Car Jack Kit 5Ton 12V Car Jack Hydraulic (Lifting Range: 6.1-20.86 inch) with Impact Wrench & Inflator for Car SUV Sedan MPV with LCD & Tire Pressure Display

  • [Powerful Hydraulic Jack] Car jack hydraulic 5 ton( 11023 lbs) 12V kit with electric impact wrench is a great choice for tire repairing. Our electric car jack is equipped with LCD and tire pressure display and takes less than 2 mins to lift to its MAX height..
  • [Your Car Repair Helper] Electric car jack kit 5 ton has two ways of power supply: cigar lighter and car battery, the high-power nearly matches all the vehicles in the market, sedan, SUV, MPV, truck. With a tire inflator pump installed in the electric jack, no need to worry about the tire-broken emergency in the middle of no where..
  • [Portable Impact Wrench] This electric car jack kit includes a portable ergonomic-designed electric impact wrench with two sleeves with two sizes, matching more vehicles. The gradienter on the wrench helps correct your working orientation while operating..
  • [All for Your Security] When electric hydraulic jack reaches its MAX height or the weight exceed its MAX loading weight, electric jack will automatically stop lifting. We send you a pair of gloves to protect your hands while operating, the red triangle outside the electric car jack ....
Check Stock

E-HEELP Electric Car Jack 5Ton 12V Hydraulic Car Jack Kit with Electric Impact Wrench for SUV MPV Sedan Truck Change Tires Garage Repair

  • [Poweful Car Jack] Electric car jack is hydraulic driven, it can lift vehicles within 5 tons in less than 2 mins to its Max. height (lifting range: 6.1-17.7 inches). The high power engine installed in the hydraulic jack nearly matches all the autos, sedan, SUV, MPV, pickup and truck. The powerful hydraulic srenth is more competitive than an other car jacks..
  • [Change Tires Easily] Car jack hydraulic type can be supplied with two methods: cigar lighter and car battery. We recommend the car battery to our customers, the current would be more stable. Tire pumping inflator is installed in the floor jack, equipped with tire pressure display, you are able to monitor the tire pressure easily. If you are a guy who is not used to use normal car jack and has never changed a tire, you'll be amazed how easy and quick it is..
  • [Portable Impact Wrench] This electric car jack kit contains a portable ergonomic-designed electric impact wrench and two sleeves with two sizes, matching more vehicles in the market. Powerful motor and precisely-designed speed control system, making it possible to screw/unscrew in a very short time. This electric car jack kit can save you a lot of time....
Check Stock

Fix Sinking Office Chair, Mellbree 304 Stainless Steel Chair Saver Kit Height-Adjustable Office Chair Saver for Stop Sinking Without Cylinder Replacement (with Hexagon Wrench)

  • ...ging. All recommend this pure metal gasket style. Office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, and can rotate the seat normally after improvement (the old plastic model cannot). As a simple replacement consumable, please contact us with any questions..
  • Because the hydraulic system of the old chair was damaged, the office seat kept sinking and could not maintain the desired height. Using Mellbree fix sinking office chair can solve this trouble, make the chair at the ideal height, easy to install and replace, save money and effort. Suitable for most office chairs, within the cylinder diameter of 25-28mm..
  • Installation steps: The chair saver kit uses screws to fix the metal plate to control the sinking of the chair. Step 1: Adjust the seat to the desired height, and wipe the hydraulic oil on the exposed surface of the hydraulic rod（Keeps hydraulic rods and sheet metal dry） . Step 2: Install the metal plate and rubber gasket, and clamp them to the lowest and fix it with screws. Step 3: Use a hexagonal wrench to twist the screw vigorously and fix it, try to sit and fine-tune it..
  • The sinking chair fix kit is made of 304 stainless steel, which is durable and easier to install than plastic models. After ....
Check Stock

ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service

  • STAY SAFE IN ANY ROADSIDE EMERGENCY: We all hope the day never comes, but if you get stuck with a roadside emergency, the ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service is a quick and easy car repair toolkit solution for all of your troubles.
  • ELECTRIC IMPACT WRENCH: Includes fuse, 2 chrome vanadium steel (CR-V) wheel nut socket adapters 17-19mm 21-23mm, and 11.5-foot (3.5m) long power cable with a 12V auto cigarette lighter adapter.
  • 12V DC with 12A maximum current, 100W rated power, 340N.M maximum torque.
  • 2-IN-1 ELECTRIC HYDRAULIC JACK/INFLATOR: Jack – Self-locking, 12V DC input, 150W rated power, 13A max current, 15A fuse, 11.5ft (3.5m) power cable, 3-Ton (2.7MT) loading weight, 6.1-17.7in (15.5mm-45mm) lifting height, 5°F to 122°F (-15°C-50°C) working temp.
  • Inflator – Needle heads, 12V cigarette lighter fuse, six-angle spanner.
  • 12V DC input, 35L/min inflating speed, 10A max current, 150 PSI (10 BAR) max pressure, 23.6in (60cm) air hose length.
Check Stock

ROGTZ Electric Car Jack kit 5 Ton 12V Car Jack Hydraulic Jack with Impact Wrench and Tire Inflator Pump, Car Lift Floor Jack for SUV Sedans Tire Change with LED Light (Black)

  • √4 IN 1 ELECTRIC HYDRAULIC JACK:Our 4 in 1 electric hydraulic jack includes electric hydraulic jack,air pump,warning light and major LED light,which meets all your tire replacement needs in one time.The jack is easy to lift 5 ton car,about 1 min reach max height(lifting height range:6.1~17.7 inch) .The inflator pump in storage box takes 2 min for inflating(35L/Min) the replaced tire.Build-in warning flash light and LED light enables operation at night,no need to buy additional lighting tools..
  • √Usage electric impact wrench NOTES: One:2 sleeves are available for screws of 4 sizes, pay attention to the sizes when selecting the sleeve.
  • Two: The left side of the power switch marked "II", means loosening the screw. Press "II" and keep holding until the screw has been loosened, remove the nuts.The right side mark "I", means tightening the screw.Same way, keep the "I" side pressed until the screw has been tightened.
  • √SAFE AND SECURE TO USE:Our electric hydraulic jackis will automatically stop working after reaching the height limit.The jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety duri....
Check Stock

Camoo 7463 Small Universal Gland Wrench Similar to OTC 7463 Fits Gland Nuts From 1 to 3-3/4'

  • WORKS ON -- Alternative to OTC 7463. For use on hydraulic cylinders with nuts from 1" to 3-3/4" (25 - 95mm). (NOTE: Will NOT work with 1/8” pins)..
  • NICE DESIGN -- Reversible to fit either 7/32 or 1/4 inch pinholes. Corrosion-resistant & Durable Steel construction with extreme anti-wear property..
  • FITMENT -- Specially designed to fit hydraulic cylinders on most farm and construction equipment. Repair tool for backhoe and other heavy equipment / farm machines / hydraulic machinery..
  • BENEFIT -- Heavy duty wrench features a 1/2" square drive to tackle even the most stubbom gland nuts..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.
Check Stock

Punch, Paper - Three Hole Puncher: Single Punch Paper Shredders, Punches & Scissors

  • [Fast Punch & Precise Positioning] – The hydraulic hole puncher uses a high-power motor, with a punching speed of 2-3 seconds. The punch is precisely designed, and every punch is precise..
  • [Portable & Convenient] – This hole punch is portable, and can be operated anytime, anywhere. Equipped with an auxiliary handle, it can be operated by hand, which is convenient for working at different angles. It can also be installed on the base to work on the platform..
  • [Applicable Range] – This hydraulic punch is suitable for copper/aluminum plates with a thickness of 0.11″~0.31″.
  • iron/steel plates with a thickness of 0.11″~0.23″.
  • 4~6# angle steel/iron. However, it does NOT apply to channel steel!.
  • [Complete Accessories] – The package includes: 1 x punching machine, 1 x big wrench, 1 x base, 2 x hexagon wrench, 2 x screws, 1 x auxiliary handle, 1 x carbon brush, 5 x standard dies: Φ6.5mm/9mm/13mm/17mm/20.5mm (Φ0.25″, 0.35″, 0.51″, 0.67″, 0.8″). The electric punch is packed in an iron box, and the internal parts are arranged neatly, shockproof and drop-proof..
  • [One-year Warranty] – Within one year of purchase, if something goes wrong with the product, you can replace it for free. Please purchase with confidence..
Check Stock

Knob for Bottle Jack Valve Release Screw On Harbor Freight Hydraulic Press Made of 6061 Aluminum (3/8\)

  • hydraulic jack valve release screw knob comes in two sizes to either the jack screw with a 3/8" and 7/18" diameter valve release screw.
  • It is machined from a solid bar of 6061 aircraft quality aluminum, The knob also has a longer knurled section ,for extra grip..
  • It slides on over the release screw, turns 1/4 turn then secured in place with a set screw (included) from the end of the knob. You will need to use a 5/32 hex key (Allen wrench).
  • This particular part is designed for the Harbor Freight Hydraulic Bottle Jack used in the 6, 12 & 20 ton arbor presses but will work on any bottle jack with a 3/8 and 7/18" diameter valve release screw having a.
  • DO NOT USE WHEN LIFTING VEHICLES: ONLY TO BE USED ON HYDRAULIC PRESS APPLICATIONS!.
Check Stock

OTC 6613 Variable Pin Spanner Wrench & OTC 7463 Fully Adjustable Gland Nut Wrench

  • Product 1: OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
  • Product 1: Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
  • Product 1: Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
  • Product 1: Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
  • Product 2: Fully adjustable Gland Nut Wrench fits hydraulic cylinders on vehicles having gland nuts from 1 inch to 3-3/4 inches in diameter.
  • Product 2: Reverses to work on either 7/32 or 1/4 inch pinholes.
  • Product 2: Designed for use with a 1/2 inch drive ratchet or breaker bar.
  • Product 2: High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

1266 Adjustable Gland Nut Wrench & 7463 Universal Hydraulic Cylinder Spanner Wrench For Most Farm and Construction Equipment (set of 2)

  • WORKS ON -- Alternative to OTC 1266 & 7463. For use on hydraulic cylinders with nuts from 2" to 6" (51mm to 152mm) and 1" to 3-3/4" (25 - 95mm)..
  • NICE DESIGN -- 1266 Reversible to fit 1/4” & 5/16” diameter pin holes, 7463 Reversible to fit 1/4 & 7/32" diameter pin holes. Both are manufactured from quality steel..
  • COMPATIBLE WITH -- Specially designed to fit hydraulic cylinders on most farm and construction equipment. Repair tool for backhoe and other heavy equipment / farm machines / hydraulic machinery..
  • BENEFIT -- Heavy duty wrench features a 3/4”(1266) / 1/2"(7463) square drive to tackle even the most stubbom gland nuts..
  • A MUST HAVE -- The ability of these tools to work on gland nut from 2" to 6" / 1" to 3-3/4" is a valuable quality, enabling it to be used in a variety of ways..
Check Stock

AUTOOL 12V DC 6T Universal Electric Jack Set Electric Hydraulic Floor Jack-Tire Lift Kit with Electric Impact Wrench for Car,Sedan,Van,SUV,Trucks

  • [High Stability] AUTOOL electric-hydraulic jacks are made by heavy-duty thick steel plate with integral anti-oxidation coating body which is rust-proof and wear-resistant. The large contact surface design enhances the stability, and the reinforced solid screw prevents the electric car jack from tearing or twisting. An essential tool for outdoor emergencies..
  • [Easy Operating] You can plug it directly with a power outlet or battery on the car(12V DC), press the controller button long enough, and the car/SUV will rise, which can boost the car/SUV in less than a minute due to the large load capacity of 6 tons. Easy to operate..
  • [Universal and Safety] Vehicles under 6 tons can be upgraded easily, and the lifting height ranges from 15 cm to 43 cm. Built-in safety device prevents the jack from falling even out of power and the jack will stop working automatically when reaching the height limit. Convenient built-in the electric wrench in the package, you can remove the screws while changing the tires, quick and convenient..
  • [Convenient] The electric-hydraulic jack set is equipped with a contr....
Check Stock