Reviews Hydraulic Wire Braid Hose

Shark 87392260 100-Feet High-Pressure Hose, Black/Red, 5000 PSI

  • Made of abrasion-resistant, steel-wire braid..
  • 20-percent more flexible than other brands.
  • Psi rating: 5000, hose length: 100-feet, wire braid: double, inside diameter: 3/8-inch, hose color: black, hose guard color: red.
Check Stock

Toledo Hydraulic Hose Cut Off Saw Model 14, 4.5 HP, 115V, 3500 RPM cuts up to 2\ - 6 wire

  • Toledo Hydraulic is proud to bring you a medium to heavy duty hose cut off saw made in the USA..
  • The HC14 cut off saw is designed for quick, easy cutting of industrial wire reinforced hose..
  • Comes equipped with a 14" Scalloped blade, 4.5 HP Motor that runs at 3500 RPM..
  • Handles rubber covered wire reinforced hose ranging in size up to 2" ID hydraulic hose..
  • Handles 4" inner diameter for industrial hose..
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • ...er cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
  • 5.Professional installation recommended: PTFE hose ....
Check Stock

OrangeA Carpet Cleaning Solution Hose 1/4 Inch 25ft/50ft/100ft/200ft Blue Solution Line Hose High Pressure High Heat Solution Hose (100ft)

  • Heavy duty black bend restrictors on both ends.
  • Soft, small bending radius. High wear resistance smooth wall..
  • The steel braid construction gives the solution line hoses both strength and flexibility.
  • This carpet solution line is made specifically for the carpet cleaning industry as a solution hose for truckmount and portable applications.
  • The solution hose is widely used in automotive pressure systems, rotating electric vehicle brake control system piping systems, automotive, hydraulic operation and hydraulic control system and so on.
Check Stock

Arashi Clutch Cable for KAWASAKI NINJA ZX10R ZX-10R 2011-2017 Stainless Wire Line and Rubber Motorcycle Accessories Green 2012 2013 2014 2015 2016

  • -3 hydraulic clutch lines feature clear PVC coated, PTFE lined, premium stainless steel braided hose.
  • PVC hose coating is extruded to the stainless braiding, adding great looks and abrasion protection to expensive parts, while offering resistance to damaging UV rays.
  • PTFE liner is an inert material, which is compatible with all hydraulic and brake fluids.
  • has a heat range of 158 degree F to 500 degree F.
  • Stainless steel braid is superior in pressure rating, flame resistance and volumetric expansion to all other materials..
Check Stock

Boenoea Bike Water Bottle Cage Aluminum Alloy Lightweight Bicycle Water Bottle Holder for Road Bike MTB Cycling

  • 1. Hydraulic Hose Cutter: Aluminum Alloy Body, Lightweight Design, Compatible with Various Oil Needle Specifications, BH59/BH63 BH90 Can Cut Oil Pipes, Cutting Neatly, Conveniently and Quickly..
  • 2. Bike Hydraulic Disc Brake: Compatible with Ordinary Oil Needles and Five-wire Bodies, and the Side Cutter Design Can Cut Oil Pipes..
  • 3. Hose Cutter Tool: Efficient and Precise Operation, Avoiding the Twisting and Deformation of the Oil Pipe Caused by Violence, the Aluminum Alloy Cross Arm Knob Is Detachable, Aluminum Alloy CNC Processing,.
  • 4. Hose Cutter: the Cutting Is Convenient and Fast, and the Cutting Is Neat. (Blade Can Be Replaced by Design).
  • 5. Needle-assisted Positioning, Static Placement, Compatible with Ordinary Oil Needles. Round Head Auxiliary Positioning, Static Insertion, Suitable for Five-wire Body Insertion, Easy to Switch Between Double Plugs..
Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

Enerpac H7206 High-Pressure Hydraulic Hose, 700 Series, 6' x 0.25\

  • Yellow hydraulic hose for connecting Enerpac hydraulic pump to hydraulic cylinder or tool (pump, cylinder, and tool sold separately).
  • Polyurethane coating with two layers of steel wire braids for durability and abrasion resistance.
  • 3/8" couplers with NPTF threading to prevent leaks.
  • Maximum working pressure of 10,000 psi with 4:1 design factor.
Check Stock

Jagwire Workshop Internal Routing Tool Bike Tool Black 2017 Bike Tools kit, Noir, One Size (WST050)

  • EFFICIENCY: uses a rare earth magnet that attaches directly to cables, housing, hydraulic hose, and electronic shifting wire, and can be fed directly though difficult internal setups without the need for a separately routed lead wire.
  • WARRANTY: Limited 2-Year * against defects in materials and workmanship. * only applies to original owner and proof of purchase is required..
  • Jagwire's Pro Internal Routing Tool simplifies routing through a frame, using powerful magnets to safely and easily guide cables, housing, and e-shift wires. A retractable, flexible magnet can be inserted into the receiving end of an internal cable run to find the magnetic adapter and easily pull it through. Adapters for inner cables, hydraulic hose, and Di2 e-Tube wires are included. The adapters nest neatly inside tool body when not in use..
  • : Limited 2-Year * against defects in materials and workmanship. * only applies to original owner and proof of purchase is required..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock

MWMNUN 2400mm AN3 M10 Motorcycle Hydraulic Brake Line Oil Hose Pipe Fitting Stainless Steel Braided Compatible with ATV Motorcycle Motocross Pit Dirt Street Racing bike-2400mm blue

  • Size:Diameter is Φ10mm, Two side banjo bend is 28°to 90°.
  • Material： parts is steel with anti-rus coating. Hose Parts - Inner Layer is Nylon flexible hose, Middel Layer is stainless steel wire braided, Outside Layer is clear color PVC protection..
  • Fit FOR: Can be used for transfer pressure for all car's & motors UTV. ATV etc.hydraulic brake system AN3 1/8" ..
  • Package included:1 x Hydraulic Brake Line Oil Hose Pipe Fitting,6 cable ties..
  • NOTICE - Please check the description and compatibility chart to verify the fitment before your purchasing.
Check Stock

48x Cyclone Natural Pre Rolled Grape Toasted Hemp Cone 24x 2 Packs Non Tobacco

  • SPECIFICATION - Inside Diameter – 3/4” Diameter | Length - 165 Feet Long | Color - Black | Pitch - 20mm/0.79” | Material - HDPE (High-Density....
  • HEAVY DUTY HYDRAULIC HOSE SPIRAL WRAP - Kable Kontrol Cyclone HDPE hydraulic hose wrap is ideal for Heavy Duty bundling and hydraulic hose protection,....
  • MSHA CERTIFIED & UV RESISTANT - Cyclone heavy duty spiral hose wrap is MSHA certified and UV resistant. Cyclone hydraulic hose spiral wrap protects....
  • UNIQUE FEATURES - Kable Kontrol Cyclone Heavy duty hose protector tubing have rounded edges for reduced risk of exposed sharp edges. This Heavy duty....
  • COST EFFECTIVE & QUICK METHOD - Cyclone Spiral tubing serves as a cost-effective and quick method for minimizing heavy production losses. Developed to....
Check Stock