Reviews Hydraulic System Leak Sealing Products

Tranz-X Kitsuma Dropper Post w/External Routing (31.6/125mm, No Lever)

  • HIGH-STRENGTH ALUMINUM ALLOY: High-Strength Aluminum Alloy Material, High Hardness, Dropper Seatpost Strong And Durable..
  • HYDRAULIC SYSTEM: Mtb Dropper Post Can Be Locked At Any Position, More Comfortable Riding..
  • DOUBLE SCREW REAR DRIFT DESIGN: Bike The Seat Post Adopts Double Screw Rear Drift Design, Both Screws Use 10.9-Level Torque, And The Screw Locking Is More Stable..
  • SEALING DESIGN: Dropper Post Sealing Ring Design, Rainproof And Dustproof, Protect The Seat Tube.Will Not Leak Oil..
  • BOTTOM DISPLAY: The Bottom Fine-Tuning Screws Are All Adjusted At The Factory And Do Not Need To Be Adjusted.Hydraulic Lift Seatpost..
Check Stock

Sub-Zero Synthetic Automotive Refrigerant R-134a (18 ounces)

  • R134a KIT - Kit contains (2) 18oz cans of R134a refrigerant with stop leak and a reusable can tap with gauge. A total of 36oz of R134a is enough to recharge almost every vehicle, just 18oz is not enough if you have a completely empty system..
  • STOP LEAK - The stop leak in this kit is good for sealing leaks in rubber components such as o-rings. This is a basic stop leak and can not repair more severe leaks. Products like ZeroR Max Seal are much stronger and can even repair leaks in metal components..
  • CAN TAP & GAUGE - Reusable can tap and gauge for similar EZ Chill products. Note, this is NOT a universal can tap and can not work on common R134a threaded products. For a truely universal can tap check out the ZeroR brand of tools and refrigerants..
  • INSTRUCTIONS - Steps on product should be followed closely. With vehicle running and AC set to Max Cool, connect can to low side service port. Dispense refrigerant into system in short bursts, checking the gauge in between dispensing for proper charging levels..
  • LEGAL - Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans. R134a Refrigerant for MVAC use in 18oz self sealing valve cans..
Check Stock

Honey Well Genuine 8oz R1234YF Refrigerant (3 Freon Cans) & HD Brass Can Tap with Gauge

  • R134a KIT - Kit contains (2) 18oz cans of R134a refrigerant with stop leak and a reusable can tap with gauge. A total of 36oz of R134a is enough to recharge almost every vehicle, just 18oz is not enough if you have a completely empty system..
  • STOP LEAK - The stop leak in this kit is good for sealing leaks in rubber components such as o-rings. This is a basic stop leak and can not repair more severe leaks. Products like ZeroR Max Seal are much stronger and can even repair leaks in metal components..
  • CAN TAP & GAUGE - Reusable can tap and gauge for similar EZ Chill products. Note, this is NOT a universal can tap and can not work on common R134a threaded products. For a truely universal can tap check out the ZeroR brand of tools and refrigerants..
  • INSTRUCTIONS - Steps on product should be followed closely. With vehicle running and AC set to Max Cool, connect can to low side service port. Dispense refrigerant into system in short bursts, checking the gauge in between dispensing for proper charging levels..
  • LEGAL - Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans. R134a Refrigerant for MVAC use in 18oz self sealing valve cans..
Check Stock

228 Buna-N O-Ring, 50A Durometer, Round, Black, 2-1/4\ ID, 2-1/2\ OD, 1/8\ Width (Pack of 10)

  • O-RING ASSORTMENT KIT: NEIKO introduces our Rubber O-Ring Assortment Set. Each O-ring acts as a joint gasket to seal and protect water lines in any oil line, faucet, sink, filter, toilet, or other machinery..
  • VERSATILE & RELIABLE: Thanks to the NBR construction, these O-rings are resistant to water, UV, lubricants, hydraulic fluids, gasoline, alkalis, and grease. Each O-ring creates a long-lasting seal system that protects your devices from leaks..
  • DURABLE O-RING KIT: Each O-ring in this 270-piece set is built for long-lasting use with static and dynamic motion cylinder fittings. The rings are made of commercial-grade nitrile butadiene rubber for liquid resistance..
  • COMPACT SIZE: Our O-ring kit comes organized in a case by ring size and shape. Carry this seal tool set with you wherever you’ve got a leak that needs extra sealing protection, and be ready to repair against water leaks and other liquids..
  • WHAT’S INCLUDED: This rubber O-ring set includes 18 common small and large SAE and metric sizes for a range of home, hydraulic, industrial, and pneumatic applications. A sturdy plastic case is included..
Check Stock

KIMISS Line Lock Manual Brake Lock Hydraulic Brake Park Lock Pressure Holder for Cars Trucks

  • 【Brand & New】100% brand new brake lock line lock, hydraulic brake park lock pressure holder,direcct replacement for your old one..
  • 【Main Useage】This Line Lock Manual Brake Lock Hydraulic Brake Park Lock using hydraulic line pressure hold your brakes.help you modify your car..
  • 【High Accuracy & Stable Performance】Professional manufacturing, Come with high accuracy and stable performance..
  • 【Extra sealing ring】Come with one extra sealing ring for replacement.We offer 24 months warranty and 30 days money back guarantee for all KIMISS products, and we are fully responsible for all product problems. If you have any problems, do not hesitate to contact us..
  • 【Universal Fitment】Universal Fit for cars, trucks, Disc or Drum brakes.widely used for replacement..
Check Stock

Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Single Acting Pullers Foot Pump with Trachea and Oil Pipe for Pumping Water Automobiles Industrial Chemical Petroleum Mining Pulling Post

  • 【ALL-METAL STRUCTURE】This hydraulic foot pump is specially designed for industrial applications with all-metal structure. It has fully reliable components, all components are standard 3/8 inch NPT..
  • 【FOOT PEDAL CONTROL】The hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Full of power, two-stage pressure relief, 1.5 times the speed of ordinary hydraulic pumps..
  • 【OUTPUT PRESSURE】Air Treadle Foot Actuated maximum pressure: 10000 psi hydraulic pump and has a built-in safety overload pump power saver. Maximum input air pressure: 140PSI. Flow rate: 0.74-0.97 m3/MIN. Rated pressure: ≤ 70 Mpa..
  • 【APPLICATION】Widely used in automobile manufacturing inspection and maintenance, engineering technology, aerospace, chemical, petroleum, mining and other industries to provide high-pressure power for hydraulic equipment..
  • 【FAST OILING AND GOOD SEALING PERFORMANCE】Aerospace Grade Materials aluminum fuel tank capacity: 1.6L, hydraulic oil type: AW-32. The hydraulic pump is equipped with a high-pressure tubing. Oil outlet: 3/8 inch NPT, Air inlet: 1/4 inch NPT. The tubing adopts double-protected embedded steel wire and a thickened outer layer, whi....
Check Stock

OTC HDJ5P Air / Hydraulic Service Jack - 5 Ton

  • Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts.
  • Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty.
  • Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram.
Check Stock

Brake Bleeder Kit One Person, Vacuum Brake Bleeder Hand Vacuum Pump Brake Fluid Bleeder Kit with Pressure Gauge Bleeder Adapters Reservoir Hoses, Self Brake Bleeding Kit for Brake Fluid Power Steering

  • UNIVERSAL BLEEDING KIT: Orion Motor Tech's brake bleeder pump with an adapter set works with nearly any vehicle's system and lets you bleed your brakes, clutch, or any other vehicular hydraulic system in under 5 minutes all by yourself.
  • SUPERIOR DURABILITY: The easy-to-use handheld vacuum pump is constructed from high-grade aluminum alloy for lightweight long-term use and is anodized for even greater corrosion proof performance.
  • HERMETIC SEALING: Our tubes are made from premium silicone for better resilience, heat resistance, and sealing performance than the competition.
  • the barbed pump nozzle and the included clamps grip the tube firmly and keep your work tightly sealed.
  • WIDE APPLICATION: Not just for bleeding brakes, this brake bleeder pump also clears oil, power steering fluid, and other hydraulic systems.
  • test vacuum systems, carburetors, fuel petcocks, and even use with compatible containers to do some vacuum sealing.
  • 1 YEAR WARRANTY: Orion Motor Tech backs this brake bleeder pump with strong 1 year warranty and our usual friendly 24/7 customer service, ensuring that you'll enjoy its use for years to come!.
Check Stock

The Terminator

  • Hydraulic bottle jack designed for residential and commercial use.
  • Serrated, heat treated saddle provides generous lifting area and secure grip.
  • Features a lifting range of 11" to 17-3/4" with a 50 ton (100,000 lb) capacity.
  • Engineered using a drop forged alloyed steel construction for quality and durability.
  • Inner/outer welded structure delivers leak-free performance.
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits.
  • Meets ASME PASE safety standards and includes a limited 1 year manufacturer warranty.
Check Stock

Akozon Hydraulic Pressure Gauge Hydraulic Hose Test Point Coupling M16 2-BSP1 / 4 0〜600BAR / 0〜8500PSI with 1.56m / 61.42inch Hose Kit Hydraulic Pressure Test Kits

  • 【Test the Pressure】This hose gauge kit is designed for testing pressure in a hydraulic system.Test the pressure of each point of the hydraulic system and the pipeline as a conductive fluid medium. The pressure measuring hose assembly is used in conjunction with the pressure measuring connector..
  • 【High Quality】This hydraulic pressure gauge kit has one strong and light aluminum case.Excellent material selection, the shell is made of 304 stainless steel, stainless steel material has the characteristics of wear resistance, , and good contact performance,well protect the inner accessories..
  • 【Chemical stability】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents.
  • 【Strong environmental adaptability】 ,resistance, adaptation to climate change, no absorption..
  • 【High Performance】The pressure measuring hose assembly has the advantages of advanced structure, reliable sealing, secure seizure, small size, light weight and easy use. Because the inner wall is smooth, the flow resistance is very small..
Check Stock

Superior Pump 92181 1HP Stainless Steel and Cast Iron Tethered Float Switch Sump Pump, 1 HP, Silver

  • Premium Double PTFE Diaphragms: Our air-operated double diaphragm pump adopts PTFE diaphragms, durable, corrosion-proof, and long-lasting. Max. Temperature: 150 ℉/66 ℃.
  • Sturdy & Leak-proof Construction: The diaphragm pump housing is made of aluminum alloy material, bolted against leakage, sturdy, and corrosion-proof for long-time use..
  • Excellent Air-operated Performance: Inlet/Outlet Port Size: 1 inch.
  • Air Inlet Size: FNPT 1/2 inch. A high-quality glyd ring, the double-acting sealing, strengthens air performance..
  • Unique & Professional Designs: Our double diaphragm pump features an externally available air distribution system. The modular air valve is stainless. This low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes downtime..
  • Wide Applications: This diaphragm pump can handle various fluids, such as waste oil, alcohol, hydraulic fluid, gasoline, diesel, detergent, drink, and so on. It is widely used in many industries, such as petroleum, metallurgy, mining, coating, printing, water treatment, and automobile..
Check Stock

Happybuy Air-Operated Double Diaphragm Pump 1 inch Inlet/Outlet 30GPM Polypropylene Max 120PSI for Chemical and Industrial Use

  • Premium Double PTFE Diaphragms: Our air-operated double diaphragm pump adopts PTFE diaphragms, durable, corrosion-proof, and long-lasting. Max. Temperature: 150 ℉/66 ℃.
  • Sturdy & Leak-proof Construction: The diaphragm pump housing is made of polypropylene material, bolted against leakage, sturdy, and corrosion-proof for long-time use..
  • Excellent Air-operated Performance: Inlet/Outlet Port Size: 1 inch.
  • Air Inlet Size: FNPT 1/2 inch. A high-quality glyd ring, the double-acting sealing, strengthens air performance..
  • Unique & Professional Designs: Our double diaphragm pump features an externally available air distribution system. The modular air valve is stainless. This low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes downtime..
  • Wide Applications: This diaphragm pump can handle various fluids, such as waste oil, alcohol, hydraulic fluid, gasoline, diesel, detergent, drink, and so on. It is widely used in many industries, such as petroleum, metallurgy, mining, coating, printing, water treatment, and automobile..
Check Stock

Hapco Products - Hydraulic Oil – 32 oz.

  • Specs: Description: Hydraulic Oil and Stop Leak, Adds life to pumps, rams and seals, Adds lubricity and thermal stability to any hydraulic oil, Automatic transmissions: use approx. 10% to stop slip, leaks, rough shifting and over-heating.
  • up to 30% in worn units, Construction equipment: use approx. 5%-10% for preventative maintenance.
  • up to 20% to correct heat, leaks and fading in older equipment, Hydrostatic drives: use approx. 10% for more hydraulic pressure and less gear wear.
  • Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order..
  • Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging..
Check Stock