Reviews Hydraulic Scissors Lift

OTC 5285 1,650 lb. Capacity Air/Hydraulic Power Train Lift

  • OTC's 1,650 lb. capacity Powertrain Lift is perfect for handling engine and transmission assemblies, gas tanks, drive axle assemblies, engine/transaxle assemblies, electric vehicle batteries, and more.
  • Scissors-type design allows access to all 4 sides of a component for supreme accessability.
  • Two independent adjusting screws tilt the table 15 degrees side-to-side, or fore and aft and can be operated manually or with a non-impact air wrench.
  • Air/hydraulic operation via a foot control pump that features a flexible hose allowing movement around lift.
  • Features a 20 x 32 inch table, 8-inch high capacity swivel casters, a minimum height of 31-1/2 inches with a 74-1/2 inch maximum height, and a footprint that is 33 inches wide x 48 inches long.
Check Stock

Mophorn 12V Dump Trailer 13 Quart Single Acting Steel Reservoir, 3200PSI Power Unit with Control Remote 12 Volt Hydraulic Pump, Black

  • 【HIGH QUALITY MATERIAL FOR LONGEVITY】- This hydraulic power unit full high quality construction with high strength and hardness. Good wear resistance, durable in use..
  • 【FAST START】- The high-quality hydraulic pump ensures a fast start every time and a long using period, Reduce labor intensity, improve hydraulic trailer pump work efficiency..
  • 【RELIABLE QUALITY】- The electric hydraulic pump is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions..
  • 【EASY TO OPERATE】- This dump trailer hydraulic pump equipped with other hydraulic tools can carry out lifting, pressure type, elbow, bending row, straightening, cutting, assembly, demolition and many other work..
  • 【WIDE APPLICATION】- Hydraulic power used in applications where extending a hydraulic cylinder is needed, truck tailgate lift, scissor lift, dump trailer, lift truck, snow plow, aerial platform, road signs, material handling.
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

Bishamon - LX-100N 230-V 3PH - Stationary Electric Lift Scissor Lift Table, 2200 lb. Load Capacity, Lifting Height Max. 38-5/8

  • Hydraulic table size: 32.1" x 19.7"x 2.0". Load capacity:660lbs. Max lift height:35.4inch..
  • Hydraulic lift is stable and smooth to operate. With supporting plat on side of arm to ensure the safety service..
  • Lift table wheels have brakes. Won't go rolling away when you use the foot operated floor lock..
  • Easily move heavy loads from work cells to table or benches.Widely used for lifting,positioning, transporting materials around a worksite..
  • With easy action foot operated foot hydraulic pedal.Foot pump is easy to lift, and handle is easy to control the hydraulic release..
Check Stock

SuxiDi 2PCS Auto Car Truck Service Ramps Lifts, 10000lbs Heavy Duty Hydraulic Car Ramps Lift for Car Repair

  • 【STURDY MATERIAL】SuxiDi truck service ramp elevator is made of high-quality steel, and the exterior is painted to prevent rust. The hydraulic ramp is durable and suitable for all under-vehicle maintenance and inspections..
  • 【MAXIMUM LOAD-BEARING】The hydraulic truck ramp can lift 10,000 pounds.
  • the height of the hydraulic part can be adjusted within the range of 9.8-15in..
  • 【CAR RAMP LIFT SIZE】 Bottom length: 45 inches.
  • 【EASY TO INSTALL】SuxiDi heavy-duty hydraulic lift is easy to install, use and maintain. It is an ideal choice for maintenance and is very popular among auto maintenance personnel..
  • 【AFTER-SALES SERVICE】If you have any questions about our car lift, please feel free to contact us. Our car ramp lift are stocked in the United States, with fast and good shipping services..
Check Stock

Tory Carrier Hydraulic Scissor 660LBS Capacity, Cart Lift Table Cart 35.4”Lifting Height, Manual Scissor Lift Table 4 Wheels and Foot Pump, Elevating Hydraulic Cart for Material Handling

  • Hydraulic table size: 32.1" x 19.7"x 2.0". Load capacity:660lbs. Max lift height:35.4inch..
  • Hydraulic lift is stable and smooth to operate. With supporting plat on side of arm to ensure the safety service..
  • Lift table wheels have brakes. Won't go rolling away when you use the foot operated floor lock..
  • Easily move heavy loads from work cells to table or benches.Widely used for lifting,positioning, transporting materials around a worksite..
  • With easy action foot operated foot hydraulic pedal.Foot pump is easy to lift, and handle is easy to control the hydraulic release..
Check Stock

Legines Hydraulic Lift Table Cart Manual Single Scissor Cart 330 lbs Capacity Heavy Duty 28.3\ Lifting Height Material Handing Elevating

  • 【RUBBERIZED HANDLE DESIGN】- Unique rubber handle design, improve the use of comfort, in the handling of heavy cargo use hand force, reduce hand and handle parts of friction, rubber handle soft and comfortable..
  • 【330 LBS LOADING CAPACITY】- It has a maximum lifting height of 28.34".
  • Table Dimension: 27.6" x 17.7"x 1.4" and can lift to 330LBS, we came up with our materials cart to make working with heavy load an enjoyable process. This hydraulic scissor lift jack is designed with an overload valve to protect pump and operator..
  • 【FOOT-OPERATED PEDAL AND HAND LEVER DESIGN】- This hydraulic pedal design would keep your hands free and save energy. The hand lever is for easy, controlled hydraulic release. It is easier to control the cargo and table..
  • 【MANUAL SCISSOR LIFT TABLE】- The steel scissor cart can reach the desired platform height by using your foot to control the pump, and the hand lever controls the hydraulic release easily..
  • 【TWO LOCKING SWIVEL CASTERS】- More mobility and maneuverability could be achieved for the caster design. And the lift table could be fixed at some places easily. Shipped from CA Delivered ASAP.
Check Stock

Car Ramps - wuyule 2PCS Auto Car Truck Service Ramps Lifts, 10000lbs Heavy Duty Hydraulic Car Ramps Lift for Car Repair

  • 【STURDY MATERIAL】wuyule car ramps is made of high-quality steel, and the exterior is painted to prevent rust. The hydraulic ramp is durable and suitable for all under-vehicle maintenance and inspections..
  • 【MAXIMUM LOAD-BEARING】wuyule heavy duty car ramps can lift 10,000 pounds.
  • the height of the hydraulic part can be adjusted within the range of 9.8-15in..
  • 【CAR RAMP LIFT SIZE】 Bottom length: 45 inches.
  • 【EASY TO MAINTAIN】wuyule heavy-duty hydraulic lift is easy to install, use and maintain. It is an ideal choice for maintenance and is very popular among auto maintenance personnel..
  • 【AFTER-SALES SERVICE】If you have any questions about our car lift, please feel free to contact us. Our car ramp lift are stocked in the United States, with fast and good shipping services..
Check Stock

BLACKHAWK BP225 Air/Hydraulic Axle Jack (25 Tons)

  • Specification: 8 ton (16,000 lbs) capacity with a 6.69" minimum lift height and 16.94" maximum lift height.
  • Double Ram: Features lower minimum lift height and higher maximum lift height than common bottle jacks.
  • Suitable for wider variety of vehicles including trucks and SUVs.
  • Extension Screw Top: Adjust the screw before actually stroking the pump, saving time and effort.
  • High Quality Hydraulic Oil: Filled with unique hydraulic oil, which provides great corrosion resistance and -13 °F – 140 °F operation temperature flexibility.
  • Warranty: Includes 1-year limited manufacturer warranty.
Check Stock

INTBUYING 1500 LB Professional Motorcycle Hydraulic Lift Bike Stand Garage Repair

  • This Hydraulic Motorcycle Workbench Lift is suitable for two-wheelers with cradle frames due to the individually adjustable rubber support mounts..
  • Working on the front and rear axle, frames, engine or swinging is not a problem anymore..
  • Despite its compact design the motorcycle lift has a load capacity of 680kg / 1500lb and suffices for heavy machines..
  • Lifting and lowering is carried out via the hand crank. An uncontrolled lowering of the mini lift is not possible..
  • Scope of Motorcycle Hydraulic Lift Application: Suitable for heavy locomotive such as ATV,and COV..
Check Stock

Legines Double Scissor Hydraulic Lift Table/Cart 330lbs Capacity 49\ Lifting Height

  • ...d operate. Can be widly used on production lines, in warehouse or logistics operations..
  • 【330 LBS LOADING CAPACITY】- It has a maximum lifting height of 49.6".
  • Table Dimension: 27.6" x 17.7"x 1.4" and can lift to 330LBS, we came up with our materials cart to make working with heavy load an enjoyable process. This hydraulic scissor lift jack is designed with an overload valve to protect pump and operator..
  • 【MANUAL SCISSOR LIFT TABLE】- The steel scissor cart can reach the desired platform height by using your foot to control the pump, and the hand lever controls the hydraulic release easily..
  • 【EASILY MOVE】- Two locking swivel wheels and two rigid wheels have a strong resistance to wears, which ensure stability and smooth. Easy to operate, low noise, and to a large extent to meet the different work needs of customers..
  • 【RUBBERIZED HANDLE】- Unique rubber handle design, improve the use of comfort, in the handling of heavy cargo use hand force, reduce hand and handle parts of friction, rubber handle soft and comfortable.Hydraulic Cylinders with chrome-plated rams for durability. Shipped from CA Delivered ASAP (Don't need 14-28 days)..
Check Stock

Reaper's Stand (Reapers Motorcycle Club Book 4)

  • CONVENIENT MOTORCYCLE REPAIR: This hydraulic ramp saves both time and effort during motorcycle repair and maintenance. By loading and lifting the motorcycle up to eye level or higher, you can make delicate repairs to your bike without having to crane your neck while doing so..
  • PNEUMATIC LIFT TABLE: This hydraulic motorcycle lift table has a dual pedal system and a drop panel approach to allow for ease when getting your bike onto the ramp. It also has a front-wheel clamp with a safety locking bar and rear drop panel for added safety and security..
  • SAFETY AND SECURITY: These ramps have a diamond-plate surface to prevent slipping and sliding. They also have strap access ports so you can secure the bike to the ramp as you work on it. These safety allowances make it easy to protect yourself as you work on motorcycles, either in a pro mechanical shop setting or in your home garage..
  • DURABLE CONSTRUCTION: The hydraulic ramp has a 1,000-pound weight capacity, so you can easily lift your bike. With its sturdy 11-gauge steel construction and high weight capacity, you can lift any bike for servicing with confidence and ease..
Check Stock

AFF Fuel Tank Adapter, Transmission Jack Accessory, 3198

  • Version 2.0, functional upgraded with dual springs, higher pressure, increased the stability and the lift speed.
  • This is our newest 1300LBS / 0.6T Upgraded Hydraulic Pressure Transmission Jack, with which you can easily guide a transmission safely and securely. It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement. It's ideal for any automotive or light truck transmission installation or removal..
Check Stock