Reviews Hydraulic Hose Clamp Kit

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • [Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
  • [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....
Check Stock

Hose Clamp Pliers Set, 9pcs Wire Long Reach Hose Clamp Pliers Set for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps, Clamp Removal Tool by BOOTOP PIN

  • 9PCS Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps.
  • Hose Clamp Pliers For replacement of fuel, oil, and water hose.
  • Hose Clamp Tool Pliers for the removal and locking of clamps into open position..
  • Universal Hose Pliers Set Includes long-reach cabled hose clamp pliers(Flexible Hose Clamp Pliers), Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Locking Design: The 5 spring-clamp pliers are capable of locking in place to free your hands and speed up your repair work. Long reach hose clamp plier with wire flexible wire shaft convenient for working hidden areas and long distance. Perfect Fit: Having purpose-built tools will eliminate time-consuming work arounds and jerry rigging, making your hose work a breeze. This hose clamp tool box set works with plastic and metal hose clamps from 11/16 inch to 2 1/2 inches..
  • Automotive hose clamp pliers set may also know as hose clamp tool, hose clamp tool pliers,....
Check Stock

Dometic SeaStar Pro Outboard Hose Kit, HO5722, Kevlar Reinforced, 22ft.

  • SeaStar PRO HO5722 Kevlar Reinforced Hydraulic Steering Hose Kit includes two (2) 22-Foot Hoses.
  • Custom Multi-Layered Composite Design with Kevlar Reinforcement for Strength.
  • Engineered to Provide your Steering System with Very Low Thermal Expansion Properties.
  • Designed to Exceed SAE and ABYC Specifications and Provide Precise Steering Control not Achievable with Hydraulic Industry Standard Hoses.
Check Stock

TAISHER 10PCS Brass Hose Barb Fittings 3/8 Inch to 1/4 Inch Barb Hose, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel with 20PCS Hose Clamp

  • [ MATERIAL ] High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel..
  • [ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas, hydraulic hose..
  • [ OPERATING TEMPERATURES ] Temperature range from -65 to +250 degrees F..
  • [Function] Used to connect hoses of different diameters. The hose barb can be firmly connected to the hose, and the hose clamp can form a tight seal on the flexible or semi-rigid hose..
Check Stock

Hydraulic AC Hose Crimper 71500 Manual A/C Hose Crimper Kit Air Conditioning Repair Handheld Hydraulic Hose Crimping Tool, SK8057

  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") and reduced barrier hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") . Note: #8SRB and #6 is the same dies, with purple color..
  • This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability. Stamper hardness can reach up to 53 HRC, making the crimping effect better, and the hand‑held detachable hydraulic design makes the manual air conditioning hose compressor easier to use..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice. The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws..
  • Hose Crimper Kit comes with a whole set of accessories and one storage box, which makes it easier for you using. Easy to store, easy to organize, avoid missing..
  • 7*24 hours online service. If you encounter any questions during the shopping process, you are welcome to contact us at any time..
Check Stock

TIKSCIENCE Bleed Tube with Bridge Tube for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit

  • Application - Hydraulic steering filler bleed tube kit fit Seastar hydraulic steering systems.
  • Package Includes: Bleed kits include bridge tube and bottle to tube, used to replenish the steering system fluid of ships, hose with screw cap which....
  • Save Your Money - Hydraulic steering filler kit used to replenish oil for the ship's steering system fluid, entire steering system remains sealed....
  • Simple to Use - Connect the steering fluid bottle to the fitting with the adapter hose and vent the bottle per the instructions on the hose and bottle....
  • Service - Undergoes more stringent testing than aftermarket products, you will get a 90-day shelf life for our store. If you have any questions about....
Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

Cimeton 11Pcs Hose Clamp Pliers Set Including 3Pcs Hose Clamp Pliers, 1Pc Car Water Pipe Locking Pliers and 6Pcs Hose Removal Hooks Set for Hose Installations

  • ✅ [High Quality Material]: This hose clamp pliers set are made of heavy duty carbon steel and firm handles, you don’t need to worry about hose clamp pliers will damage your hoses. It is professional hose clamp pliers set and easy to dismantle flat or ring hose clamps..
  • ✅ [What You Can Get]: You can get 3pcs hose pinch pliers, 1pc water pipe hose clamp pliers and tool box, 6pcs hose removal hooks with different sizes and types, totally 11pcs. It is a complete hose clamp pliers kit and you don’t need to buy others..
  • ✅[Hose Clamp Pliers Set]: Our o shape hose clamp pliers is flat, it is easy to get into those tight spaces and complete the job. Tips swivel can allow access in confined areas and be used at any angle. And three sizes hose pinch pliers can meet your different needs. Special buckle design makes it can be caught by a safety buckle according to the size of the clamp. Our hose pinch pliers can prevent most liquids from getting dirty and prevent air from escaping..
  • ✅ [With 2Pcs Hose Removal Hook Set]: This kit included a U type and V type hose removal hook with red handle. It can be installed between various fittings and hoses. It is essential tool for fixing CV boots and flattens clamps on ear type CV joint boot clamps..
Check Stock

Akozon Hydraulic Pressure Gauge Hydraulic Hose Test Point Coupling M16 2-BSP1 / 4 0〜600BAR / 0〜8500PSI with 1.56m / 61.42inch Hose Kit Hydraulic Pressure Test Kits

  • 【Test the Pressure】This hose gauge kit is designed for testing pressure in a hydraulic system.Test the pressure of each point of the hydraulic system and the pipeline as a conductive fluid medium. The pressure measuring hose assembly is used in conjunction with the pressure measuring connector..
  • 【High Quality】This hydraulic pressure gauge kit has one strong and light aluminum case.Excellent material selection, the shell is made of 304 stainless steel, stainless steel material has the characteristics of wear resistance, , and good contact performance,well protect the inner accessories..
  • 【Chemical stability】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents.
  • 【Strong environmental adaptability】 ,resistance, adaptation to climate change, no absorption..
  • 【High Performance】The pressure measuring hose assembly has the advantages of advanced structure, reliable sealing, secure seizure, small size, light weight and easy use. Because the inner wall is smooth, the flow resistance is very small..
Check Stock

ACforCars Universal A/C Kit System (Without Compressor) Condenser 10x18, Cooling Fan 10', Underdash Evaporator Console Black, Drier, Fitting, Hose Bundle & O-Rings

  • UNDER DASH EVAPORATOR UNIT 13,000 BTU 4 Louver all BLACK Console, 24 Pass, Double Shaft Blower Motor 12V, Include Mounting brackets, drain hose and T, 15.7inL x 11.8inW x 5.7inH.
  • CONDENSER 10in X 18in 18mm depth COOLING FAN 10in 80W 12V RECEIVER DRIER Steel Black.
  • CLAMP for Drier SWITCH ORING Kit (5) #06 5/16 (5) #08 13/32 (5) #10 1/2.
  • HOSE Kit (6 FT) #6 5/16 (4 FT) #8 13/32 (5 FT) #10 1/2.
  • FITTING Kit #6 #8 #10 (Straight) (45 degrees) (90 degrees) (90 degrees w Service Port) & Hose Clamp.
  • Included components: UNDER DASH EVAPORATOR UNIT, CONDENSER, COOLING FAN, RECEIBER DRIER, CLAMP, PRESSURE SWITCH, O-RING Kit, HOSE Kit, FITTING Kit.
Check Stock