Reviews Hydraulic Heavy Rolling Equipment

Camoo 7463 Small Universal Gland Wrench Similar to OTC 7463 Fits Gland Nuts From 1 to 3-3/4'

  • WORKS ON -- Alternative to OTC 7463. For use on hydraulic cylinders with nuts from 1" to 3-3/4" (25 - 95mm). (NOTE: Will NOT work with 1/8” pins)..
  • NICE DESIGN -- Reversible to fit either 7/32 or 1/4 inch pinholes. Corrosion-resistant & Durable Steel construction with extreme anti-wear property..
  • FITMENT -- Specially designed to fit hydraulic cylinders on most farm and construction equipment. Repair tool for backhoe and other heavy equipment / farm machines / hydraulic machinery..
  • BENEFIT -- Heavy duty wrench features a 1/2" square drive to tackle even the most stubbom gland nuts..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.
Check Stock

1266 Adjustable Gland Nut Wrench & 7463 Universal Hydraulic Cylinder Spanner Wrench For Most Farm and Construction Equipment (set of 2)

  • WORKS ON -- Alternative to OTC 1266 & 7463. For use on hydraulic cylinders with nuts from 2" to 6" (51mm to 152mm) and 1" to 3-3/4" (25 - 95mm)..
  • NICE DESIGN -- 1266 Reversible to fit 1/4” & 5/16” diameter pin holes, 7463 Reversible to fit 1/4 & 7/32" diameter pin holes. Both are manufactured from quality steel..
  • COMPATIBLE WITH -- Specially designed to fit hydraulic cylinders on most farm and construction equipment. Repair tool for backhoe and other heavy equipment / farm machines / hydraulic machinery..
  • BENEFIT -- Heavy duty wrench features a 3/4”(1266) / 1/2"(7463) square drive to tackle even the most stubbom gland nuts..
  • A MUST HAVE -- The ability of these tools to work on gland nut from 2" to 6" / 1" to 3-3/4" is a valuable quality, enabling it to be used in a variety of ways..
Check Stock

Anbull 20 Ton Air Hydraulic Bottle Jack, Blue Pneumatic Hydraulic Bottle Jack with Manual Hand Pump for Heavy Duty Auto Truck Repair

  • 【Wide Range of Uses】 Air hydraulic bottle jack is suitable for automobiles, trucks, farms, industries, mobile machinery, construction projects and heavy equipment. It can also cope with a variety of environments, such as temporary support for heavy objects, car repairs, car punctures, and giant lifting ..
  • 【Excellent Quality】 The shell of Anbull Air hydraulic bottle jack is made of high-quality steel, and the surface is treated with lacquer. Because of the lacquer protection, it will not rust. Moreover, a wide and strong base increases stability and strength. The height of the rod can be adjusted flexibly, with strong pressure resistance and corrosion resistance. The spring has a compact structure, quick retraction and long service life..
  • 【Safe & Reliable Lifting】 Anbull Air hydraulic bottle jack includes two additional detachable handles for manual lifting without an air compressor.
  • the heavy-duty steel structure allows the jack to be used multiple times without wear and can easily cope with heavy loads..
  • 【Convenient & Labor-saving Operation】 Equipped with hoses and connectors, it can be quickly connected to the air compressor for easy lifting operations. The manual lever hydraulic lifting can be used outdoors, the rocker is two-stage ca....
Check Stock

SPECSTAR 10 Ton Porta Power Hydraulic Jack Car Repair Tools Autobody Frame Repair Kit for Loadhandler Truck Bed Unloader Farm

  • DURABLE MATERIAL - This hydraulic jack is made of upgraded heavy-duty steel, which makes it solid and thick.
  • Compared to other traditional bulky jacks, the stability and reliability of our products provide an excellent experience.
  • HIGH CAPACITY - This jack is ideal for your garage or workshop, with a load capacity of up to 10 tons.
  • It is perfect for a variety of auto repair and construction jobs, and can meet the needs of heavy equipment lifting, pushing-pulling, bending, straightening and spreading.
  • EASY TO USE - The long handle can save your effort when you are at work.
  • This jack is easy to assemble for using and the leakless design makes the work safer.
  • The high-quality oil tube is long enough to make your operation convenient and achieve high performance.
  • Ideal for the maintenance of auto, heavy trucks, agricultural vehicles, as well as mobile machinery and heavy equipment.
  • EASY TO CARRY - The hydraulic jack has powerful functions but the body of this tool is compact enough.
  • There is a plastic case for easy storage.
  • When they are not in use, you can easily put them back into the case to save space.
  • With the convenient grip, you can easily transport them.
  • PACKAGE INCLUDES - 1x Hydraulic hand pump, 1 x Carrying case, 1x V-shaped head, 1x Wedge head, 1 ....
Check Stock

Barber Chair Reclining Hydraulic Barber Chairs Heavy Duty Styling Chairs for Salon Chair Tattoo Chair Beauty Equipment (Red)

  • 【Exquisite and Humanized Design】Heavy Duty Hydraulic rolling Recline swivel Barber Chair with high density sponge. Classical design for any barbers shop.Suitable for Barbershop, Beauty Salons, Tattoo Shop, and more.This chair is easy to install. Detailed installation steps are included in the manual..
  • 【Stable and Sturdy Construction】Large Size Heavy duty hydraulic pump with an estimated 450lbs loading capacity. 27” Chrome Base provides better stability to customers.The heavy duty steel frame under the seat cushion prevent wobbly from various movements..
  • 【Flexible Adjustment】360 Degrees Swivel with locking mechanism. Seat Height(adjustable):19"-26.
Check Stock

Bishamon - LX-100N 230-V 3PH - Stationary Electric Lift Scissor Lift Table, 2200 lb. Load Capacity, Lifting Height Max. 38-5/8

  • Hydraulic table size: 32.1" x 19.7"x 2.0". Load capacity:660lbs. Max lift height:35.4inch..
  • Hydraulic lift is stable and smooth to operate. With supporting plat on side of arm to ensure the safety service..
  • Lift table wheels have brakes. Won't go rolling away when you use the foot operated floor lock..
  • Easily move heavy loads from work cells to table or benches.Widely used for lifting,positioning, transporting materials around a worksite..
  • With easy action foot operated foot hydraulic pedal.Foot pump is easy to lift, and handle is easy to control the hydraulic release..
Check Stock

VCT 10 TON Hydraulic Pull Back RAM for Porta Power Tool

  • The hydraulic ram that hooks right up to a 10 ton hydraulic pump, like in a 10 ton portable power. This is perfect for body work on trucks, tractors, and heavy equipment..
  • This unit is made for bending, straightening, and pulling. Use for auto/truck body work, farm, construction equipment, old home and barn restorations and a lot more..
  • 10 Ton Maximum ram capacity, Rugged forged steel swivel hooks, 5" pulling distance..
  • Pulling ram, (pull back jack) used for pulling two pieces towards each other.
  • Overall Length: 26" with a 5" pulling distance.
Check Stock

OTC HDJ5P Air / Hydraulic Service Jack - 5 Ton

  • Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts.
  • Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty.
  • Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram.
Check Stock

VEVOR Bottle Jack 32 T Car Jack Hydraulic Floor Jack 70500LBS with Manual Hand Pump Pneumatic Air Jack Heavy Duty Auto Truck Travel Trailer Repair Lift

  • Heavy Lifting Capacity: Maximum load can reach up to 32 tons. The lifting height adjusts from 10.4" to 16.7". Featured with multi-layer seals and fully polished and chromed cylinder rams, the air hydraulic bottle jack ensures a good sealing performance and reliable operation..
  • Pneumatic/Manual Operation: Dual operation method is available, manual operation and pneumatic operation. The 32-ton air bottle jack can connect to an air compressor for easy and labor-saving lifting operations. Plus, the high lift bottle jack also comes with a detachable handle for manual lifting in the absence of an air compressor..
  • Flexible & Reliable Lifting: The height of the air hydraulic jack can be adjusted flexibly from 10.4" to 16.7". High strength piston rod allows for powerful lifting capacity. The non-slip head holds the load securely. With two throttle return springs, the 32-ton air hydraulic bottle jack can be automatically reset after use..
  • Heavy-duty Steel Structure: Made of sturdy metal, this hydraulic bottle jack provides a reliable and strong lifting capacity. In addition, the lacquered surface is rust-proof, not easy to wear. The thick and wide base provides stable support, easily cope with heavy loads..
  • Diverse Application: This hydraulic bottle jack with ....
Check Stock

Liqui Moly LM 48 Installation Paste 50g Tube Item

  • Lithium complex moly grease fortified with molybdenum disulfide (Moly) designed for heavy duty applications.
  • HeavyDuty Moly grease is an excellent choice for construction equipment, including Caterpillar specifications, requiring moly grease for pin and bushing applications.
  • Applications include hydraulic shovels, bucket pins and bushings, bulldozers, drag lines, dump trucks and other heavy-duty equipment with heavily-loaded pivot pins, excavators, king pins, skid steers, wheel and track loaders.
  • Ideal for heavy-duty, heavy-load-bearing applications operating in the adverse conditions found in agricultural, construction, landscaping, logging and mining environments.
  • Superior performance for fifth-wheel hitch plates, heavy-duty over-the-road trucks and trailers, king pins, municipal service vehicles, pivot pins, refuse haulers, sewer and septic trucks, snow removal vehicles, spring pins, steering linkages, universal joints, utility fleets, water pump bearings and other greased heavy-duty components, wheel bearings, demolition equipment, airport support vehicles and more..
Check Stock

Maxim WSB Swivel Ball Welded Cylinder - Double Acting Hydraulic Cylinder 1.5” Bore x 12” Stroke, 0.75” Pin & 1” Rod Diameter, 19.25” Retracted, 3000 PSI, 5300 lb Column Load, SAE 6 Port Size, 10 lb

  • SPECIFICATIONS: This universal hydraulic cylinder is double-acting with a 1.5” bore, 12” stroke length, 0.75” pin and 1” rod diameter. 19.25” Retracted, 31.25” Extended. It offers a maximum working pressure of 3000 PSI, has 5300 lb column load capacity, and SAE 6 port size..
  • PRECISE PERFORMANCE: Our hydraulic cylinder delivers error-free performance in compact and mobile equipment. The heavy-duty piston seals rule out leaks for consistent performance in heavy load applications..
  • HIGHLY RELIABLE: This heavy-duty double-acting hydraulic cylinder with swivel ball mounts is superior in design compared to other hydraulic cylinders. It provides reliable performance in complex applications requiring up to 3000 PSI..
  • BUILT TO LAST: Our welded cylinder withstands high-temperature differences and is corrosion resistant. It has a compact and lightweight design and its welded barrels provide strength and stability to its form and functioning..
  • CUSTOMIZABLE: Our swivel ball hydraulic cylinder can be customized per OEM requirements. It offers 1-inch to 3 inches bore sizes and stroke lengths that can go up from 4 inches to 36 inches for greater convenience and faster action..
Check Stock

Tory Carrier Hydraulic Scissor 660LBS Capacity, Cart Lift Table Cart 35.4”Lifting Height, Manual Scissor Lift Table 4 Wheels and Foot Pump, Elevating Hydraulic Cart for Material Handling

  • Hydraulic table size: 32.1" x 19.7"x 2.0". Load capacity:660lbs. Max lift height:35.4inch..
  • Hydraulic lift is stable and smooth to operate. With supporting plat on side of arm to ensure the safety service..
  • Lift table wheels have brakes. Won't go rolling away when you use the foot operated floor lock..
  • Easily move heavy loads from work cells to table or benches.Widely used for lifting,positioning, transporting materials around a worksite..
  • With easy action foot operated foot hydraulic pedal.Foot pump is easy to lift, and handle is easy to control the hydraulic release..
Check Stock

Artist hand Barber Chair Beauty Spa Styling Equipment Heavy Duty Vintage Salon Chair Hydraulic Recline (Black)

  • [Ergonomic Design] Heavy Duty Hydraulic rolling Recline swivel Barber Chair offering maximum comfort for clients. Classical design for any barbers shop.Suitable for Barbershop, Beauty Salons, Tattoo Shop, and more..
  • [Stable and Sturdy Construction] Chrome finished round hydraulic pump and base with classic style footrest can withstand 450 LBS. 27” Chrome Base provides better stability to customers..
  • [Flexible Adjustment] 360 Degrees Swivel with locking mechanism. Seat Height (adjustable):19"-26.
Check Stock