Reviews Hydraulic Dynamometer

HDE Professional Digital Infrared Photo Tachometer RPM Motor Speed Gauge Tach

  • Hand hold design, simply and convenient to operate..
  • Widely used for force measurement in electronics, electrical appliances, hardware, auto parts, chemical industry, pen making, light industry, textile, machinery and other industries..
  • The dynamometer can be mounted on various workbenches, or work with clamping tools..
  • The push pull dynamometer has a dial gauge with analog signal and a 10N capacity..
Check Stock

Hand Dynamometer Grip Strength Trainer - Electronic Hand Grip Strength Tester Grip Strengthener Hand Exerciser Meter Digital Hand Physical Therapy Equipment Training Gauge 265 Lbs / 120 Kgs Measurement for Sport Home School Clinic Use

  • 【Accurate and Precise measurement of Grip Strength from 0 to 265lbs(120kgs)】-【Higher capacity】-Equipped with high precision strain gauge sensor, the hand dynamometer gives you accurate momentary digital reading of gripping power. Measuring Capacity: 265lbs / 120kgs.
  • Division: 0.2lbs / 0.1kgs This is a perfect Hand Dynamometer for physical therapists, occupational therapists, athletic trainers, chiropractors, and general practitioners..
  • 【Efficient Device and Easy to Use】-The display on the handle is simple to read, and the design of this Grip Strength Tester is lightweight. The length of the handles can be adjusted to accommodate different size hands. This Grip Strength Trainer Meter is so much more convenient than the old school manual ones that are hard to read and uncomfortable to use..
  • 【Sturdy and Long-lasting】This Hand Dynamometer is made of high quality materials, which makes it sturdy and long-lasting. If you have been working on improving things with some pull up bars and pulley based exercises, This grip gauge is an excellent metric to use for determining improvement..
Check Stock

DuraGo BP848 C Ceramic Rear Brake Pad

  • Engineered for optimum braking performance and extremely quiet operation.
  • Lowers rotor and pad operation temperatures increasing rotor life.
  • Dynamometer tested for maximum stopping power in a wide variety of road conditions.
  • Shimmed, slotted and chamfered for maximum performance (where applicable).
  • Precision cut backing plates reduce vibration in the brake caliper.
Check Stock

DuraGo BP1042C Ceramic Rear Brake Pad

  • Engineered for optimum braking performance and extremely quiet operation.
  • Lowers rotor and pad operation temperatures increasing rotor life.
  • Dynamometer tested for maximum stopping power in a wide variety of road conditions.
  • Shimmed, slotted and chamfered for maximum performance (where applicable).
  • Precision cut backing plates reduce vibration in the brake caliper.
Check Stock

DuraGo BP1679MS Rear Semi-Metallic Brake Pad

  • Rotor friendly - 100% non-asbestos material.
  • High temperature friction material provides fade free performance.
  • Dynamometer tested for maximum stopping power in a wide variety of road conditions.
  • Shimmed, slotted and chamfered for maximum performance (where applicable).
  • Single layer noise dampening shims are installed during the manufacturing process.
Check Stock

DuraGo BP1086MS Semi-Metallic Rear Brake Pad

  • Made from 100 percent non-asbestos material.
  • High temperature friction material provides fade free performance.
  • Dynamometer tested for maximum stopping power in a wide variety of road conditions.
  • Shimmed, slotted and chamfered for maximum performance (where applicable).
  • Single layer noise dampening shims are installed during the manufacturing process.
Check Stock

Gates 19G3982 G-Force Continuously Variable Transmission (CVT) Belt

  • OEM constructed drop-in belt with no clutching adjustments.
  • Double and single cog configurations to match OEM belt designs maximizing heat control and flexibility.
  • Advanced aramid tensile cords and reinforced fiber loaded under cord are used in construction for durability and dependability.
  • Tested under extreme conditions in controlled environments as well as on race vehicles.
  • Dynamometer testing proves G-Force belts outlast other high-performance belts by as much as five times.
Check Stock

OHAUS 80000018 8008-MN Pull Type Spring Scale, 5000 g/50 N Capacity, 100 g/1 N Readability

  • Both rings and hook are plated and each can be zeroed with the metal nut located at the tops..
  • Each scale has a ring at the tos for hanging, and an s-hook at the bottom for attaching the sample to be weighed..
  • Clear plastic housing allow observation of the extension and retraction of the spring..
  • This spring scale have a clear plastic body that is calibrated in both gram and newton..
  • The dynamometer is used for gravity and tension measurement..
Check Stock

Rislone Hy-per Fuel Complete Fuel System Cleaner Gas

  • Six in one: equal to a bottle of regular injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer and conditioner, dry gas, gas treatment and octane booster.
  • Increase power and performance: boosts octane, power, performance and mileage, stabilizes gas, lubricates and protects.
  • Save gas: cleans and lubricates the complete fuel system.
  • engine dynamometer tests show improved fuel economy.
  • Run smoother: helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation.
  • regular use provides reduced fuel system and emission control repairs..
  • EPA registered: will not void manufacturer’s new vehicle warranty and safe to use on vehicles with oxygen sensors and catalytic converters.
  • exceeds epa compliance performance criteria and is epa registered.
Check Stock

Hydraulic Valve 2 Spool, Hydraulic Directional Control Valve, 11GPM Hydraulic Joystick Control Valve for Tractors Loaders, Double Acting Cylinder Spool

  • Hydraulic directional control valve comes with 2 spool and #8 BSPP in/out ports, and the 2 spool hydraulic joystick fits for small tractors, tractors loaders, log splitters, and so on..
  • Hydraulic control valve 2 spool for operating double acting cylinders. Durable cast iron construction provides long-term usage..
  • The hydraulic valve 2 spool, hydraulic control valve for tractor loader, all spools standard come with spring return, which can return to the neutral position..
  • The hydraulic spool control valve's relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM. The hydraulic valve 2 spool replacement for hydraulic control valve 2 spool, hydraulic directional control valve, hydraulic spool control valve, joystick hydraulic valve, 2 spool hydraulic joystick, hydraulic control valve for tractor loader, hydraulic joystick control, hydraulic loader valve joystick, hydraulic loader control valve joystick..
  • You will get 1pcs 2 spool hydraulic control valve. We provide the best after-sales service, if you have any questions, please feel free to contact us, we are happy to serve you..
Check Stock

Hein-Werner HW93291 Blue Premium Hydraulic Jack Oil - 1 Quart

  • Bio-Bottle Jack hydraulic fluid is a biobased, biodegradable and environmentally non-toxic hydraulic oil for use in general purpose hydraulic systems.
  • Specially designed to be a direct replacement for petroleum oil based hydraulic fluids in mobile and stationary hydraulic vane, piston and gear type pumps.
  • This patented technology provides superior oxidation stability and longer fluid life compared to other vegetable based hydraulic oils.
  • It meets or exceeds the requirements for type I, II and III hydraulic tools.
  • Bio-Bottle Jack hydraulic fluid is ultimately biodegradable1 vegetable based formula.
Check Stock

VEPURLT Air Hydraulic Pump 10,000PSI, Air Hydraulic Foot Pump 1/2 Gal Reservoir, Air Foot Pedal Hydraulic Pump with Hose for Hydraulic Bead Breaker

  • 【Basic Info】 -The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic. Connector Type: 3/8" NPT quick hydraulic coupler with dust cap.
  • 【Trustworthy Security】-The air hydraulic foot pump is built-in internal relief valve, which protects the hydraulic components regardless of hydraulic pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock.
  • 【Powerful Energy】-This air powered hydraulic pump is an ideal all-around power source, for use with a variety of rams, presses, & hydraulic pullers, that develops 10,000 PSI hydraulic pressure at 100 PSI air pressure.
  • 【Matching Accessories】-Equipped with a 4ft high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer. The oil port is made of cast steel, durable and reliable. A spray gun is included to control the input and interru....
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock