Reviews Hvac System Drain Line Adapters

HVAC Guys Flow Tabs with Gel Lock Technology - 18 Pack - Keeps Drain Pans Clean, Prevents Overflow, 3 Ton Tab Lasts up to 3 Months - 1 Tab is equal to 18 Regular Tablets (324 total) - Made in the USA

  • HVAC professional formula: Supercharge your air conditioner and refrigeration system maintenance with our HVAC Guys Flow Tabs with “Gel Lock” Technology. Used by fellow HVAC professionals, our Flow Tabs are specially formulated to safely and effectively keep drain pains clean and free flowing. Great for central air conditioners, ductless mini-splits, heat pumps, refrigerators, refrigeration systems, and dehumidifiers. Designed for professional use..
  • Helps prevent air clogging and water overflow damage: If left untreated, the drain line can become clogged, allowing water to overflow and causing expensive property damage. Our Flow Tabs are an easy solution to effectively prevent clogging and buildup in air conditioner condensate drain pans..
  • Special “gel lock” no-clog technology: Most pan “tablets” are hard pills that can move around the drain pan. They can clog your drain pipe or be flushed out when the drain pan fills. Flow Tabs are made with a unique GEL LOCK technology that, when wet, locks the tab gel into place. It will not move around or clog the drain..
  • Easier to use than regular drain pan tablets: Set it ....
Check Stock

Roebic K-67GDB Granular Drain Buildup Remover, 16 ounces

  • Helps Prevent Clogs and Water Leaks in A/C Drain Lines. With easy to use directions on the bottle, anyone can do it. Monthly maintenance will save on costly repairs.
  • Hvac approved. Proper usage will prevent costly water damage and save on annual maintenance costs. We recommend following our easy to use directions once a month for best results.
  • Our Heavy duty, bio enzyme formula will break down and reduce build up in a condenser drain line, drip pan, pump reservoir and p-trap that cause clogging and overflow problems..
  • By preventing drain line clogs and overflow, you will have a free flowing drain lines and zero costly repairs. Easy to use directions make this item a must DIY weekend activity..
  • Brodys A/C Drain line cleaner is a heavy duty drain clog remover and more effective than ac pan tablets. Our formula was tested numerous times to ensure great results..
Check Stock

Leak Saver - Leak Shot Refrigerant Grade CO2 Refill Cartridges 8 Pack - Refill for The Leak Shot HVAC Kit Sold Separately - for A/C & Refrigeration Systems Up to 5 Tons - USA Made

  • REFILL YOUR LEAK SHOT HVAC: This 8 pack of high-pressure refrigerant grade CO2 was made for our Leak Shot HVAC (sold separately), a leak saver/line....
  • SPECIALLY MADE CO2 CARTRIDGES: Won’t contaminate your system as you unclog condensate drain lines and seal up leaks in A/C & Refrigeration systems....
  • PATCH PESKY LEAKS, TOO: The Leak Shot HVAC itself works in tandem with the Leak Saver Direct Inject (refrigerant leak sealant) which is sold....
  • MADE BY HVAC PROFESSIONALS: And used by them, you can be confident that these cartridges are compatible with A/C and refrigeration systems up to 5....
  • 100% SATISFACTION GUARANTEE: If for any reason you’re unsatisfied with your results, contact us for another try, on us (must be installed by....
Check Stock

Regulator Gauge High Uniweld Nitrogen For Rhp400

  • The Nitrogen Sludge Sucker and Blaster Kits are specifically designed for multiple uses in the HVAC/R industry (Tank Not Included – Sold Separately).
  • Nitrogen Regulator with protective rubber gauge boots - Maximum Delivery Pressure up to 400 PSI.
  • Purging copper lines with low pressure nitrogen displaces the oxygen, preventing oxidation and the resulting scale.
  • Pressure testing a system for leaks prior to evacuating and charging will save time and money.
  • Cleaning a condensate drain line is easy with a Sludge Sucker or Sludge Blaster.
Check Stock

Nu-Line® Drain Cleaner, 32 Ounce - Sold Each

  • SimpleAir’s Clean Flow Tabs are a simple method to maintain free-flowing drain lines associated with all HVAC systems.
  • Unique tablets are time released when water activated.
  • Tabs prevent common growth in drain lines that could lead to clogging of drain lines and overflow.
  • Multiple uses: Central AC, Portable AC units, AC Condensate Pump reservoirs, dehumidifiers, or other condensate drain line applications.
Check Stock

Aupoko R410A Charging Vacuum Port Adapter Kit 2PC 45 Degree Angled and 90 Degree Charging Vacuum Adapters 2PC R410A Straight Swivel Adapters 5/16 Female to 1/4 Male Flare for Mini Split System

  • ❄ WIDE APPLICATION --- This R410A HVAC mini split adapters can be used for most newer R410A ductless mini split systems. Perfectly fits for R410a....
  • ❄ WELL-DESIGN VALVE --- R410a adapter charging vacuum port adapters have thimble, in the course of the operation, it will not open the air....
  • ❄ PREMIUM QUALITY --- R410A adapters 5/16 inches SAE Female to 1/4 inches SAE male flare are made by high quality brass Alloy, last long.
  • ❄ USEFUL ADAPTER --- R410a mini split adapter charging vacuum port adapter bass converter converts the 5/16" SAE charging-Vacuum ports (new R410a....
  • ❄ PACKAGE INCLUDED --- This adapter kit for Mini Split HVAC System come with 2pcs 45 degree angled adapters, 2pcs R410A straight swivel adapters,....
Check Stock

BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port

  • BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
  • R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
  • BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
  • 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
  • The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
  • Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..
Check Stock

NDS 900BKITRTL1PK Square Kit with 2-Opening Catch Basin, 2 Adapters, 1 Outlet Plug, and 1 Plastic Drain Grate, 9-Inch, for Lawns, Landscaped Areas, Black

  • PREVENTS COSTLY DAMAGE: Use the 9x9 catch basin as part of a complete drainage system to collect and direct heavy flows of water to drain pipe and take it away to a discharge point downstream.
  • FITS A VARIETY OF DRAIN PIPES & FITTINGS: Connects to 3 in. & 4 in. sewer and drain, single-wall corrugated, triple wall, and DWV/Sch. 40 pipes, using included outlet adapters.
  • additional outlet adapters sold separately for 6 in. & 8 in. pipes.
  • EASY INSTALL: Keyed side openings easily lock outlet adapters in place, with a cutout guide on the bottom for an additional keyed opening if needed.
  • SOIL-TIGHT FIT: Soil-tight outlet adapters connect to pipe for a secure fit—no tape or glue required.
  • included plug fits inside outlet adapter and seals opening to direct flow of water.
  • KIT INCLUDES: 9 in. Catch Basin Drain with 2 side openings and cutout guide for bottom opening, 2 Outlet Adapters, 1 Plug, 9 in. Square Plastic Black Grate.
  • Additional knock-out weep holes on bottom of basin.
Check Stock

Diversitech 6-2626L Drain Pan Plastic 26 x 26 Large

  • LARGE HVAC DRAIN PAIN: Keeps your HVAC systems mess-free to protect building components and keep your space clean.
  • NON-TOXIC MATERIALS: Vacuum-formed from non-toxic ABS plastic for worry-free use with air conditioner and humidifier systems.
  • DURABLE DESIGN: Rolled edges, ribbed bottom, and reinforced corners add extra strength to stand up to everyday use.
  • PREVENTS SPILLS: Contains a depth of 2 inches (50.8mm) of water, and comes equipped with a 3/4-inch diameter PVC discharge fitting.
  • SIZED FOR YOUR SYSTEM: Measures 26" x 26" to fit a wide range of HVAC systems and components.
Check Stock

Uniweld 40002 Nitrogen Sludge Sucker and Blaster Kit with Metal Carrying Stand for 40 Cubic Feet Nitrogen Tank

  • The Nitrogen Sludge Sucker and Blaster Kits are specifically designed for multiple uses in the HVAC/R industry ((Tank Not Included – Sold....
  • Nitrogen Regulator with protective rubber gauge boots - Maximum Delivery Pressure up to 175 PSI.
  • Purging copper lines with low pressure nitrogen displaces the oxygen, preventing oxidation and the resulting scale.
  • Pressure testing a system for leaks prior to evacuating and charging will save time and money.
  • Cleaning a condensate drain line is easy with a Sludge Sucker or Sludge Blaster.
Check Stock

EDOU 850 GPH Swimming Pool Cover Pump Above Ground,Including 16' Drainage Hose and 3 Adapters,Ideal for Water Removal,Black

  • ????【Professional Drainage】EDOU Swimming Pool Cover Pump Kit has been designed to be a convenient and affordable drainage solution.Easy to set up and let it drain away the accumulated water,ideal for both in ground and above ground pools..
  • ????【High Efficiency】75W pool cover drain pump moves up to 850 gallons per hour,which drains up to 1.5 X FASTER than a standard drain pump.Saving you heaps of time and preventing energy wastage..
  • ????【High Quality】With customized sturdy ABS casing,the water pump can filter out the dirt and is resistant to bad weather.Manual shut off.Built-in temperature control core prevents dry burning when in short of water..
  • ????【Good Compatibility】16 ft kink-proof drain hose fits contained water nozzle,removing water from any pool depth.2 extra adapters for 3/4 inch garden hose and drain hose.25 ft power cord power cord plugs into any standard 110 volt wall outlet..
  • ????【SUPERIOR Value/ Customer Service】 – Package include pool cover pump,16 ft drain hose,3 water nozzle adapters.Backed by a LIFETIME E-mail Customer Support within 24 h.Professional team is always on line..
Check Stock

EDOU 850 GPH Swimming Pool Cover Pump Above Ground,Including 16' Drainage Hose and 3 Adapters,Ideal for Water Removal,Blue and Black

  • ????【Professional Drainage】EDOU Swimming Pool Cover Pump Kit has been designed to be a convenient and affordable drainage solution.Easy to set up and let it drain away the accumulated water,ideal for both in ground and above ground pools..
  • ????【High Efficiency】75W pool cover drain pump moves up to 850 gallons per hour,which drains up to 1.5 X FASTER than a standard drain pump.Saving you heaps of time and preventing energy wastage..
  • ????【High Quality】With customized sturdy ABS casing,the water pump can filter out the dirt and is resistant to bad weather.Manual shut off.Built-in temperature control core prevents dry burning when in short of water..
  • ????【Good Compatibility】16 ft kink-proof drain hose fits contained water nozzle,removing water from any pool depth.2 extra adapters for 3/4 inch garden hose and drain hose.25 ft power cord power cord plugs into any standard 110 volt wall outlet..
  • ????【SUPERIOR Value/ Customer Service】 – Package include pool cover pump,16 ft drain hose,3 water nozzle adapters.Backed by a LIFETIME E-mail Customer Support within 24 h.Professional team is always on line..
Check Stock

NDS Square Catch Basin Drain Grate, 9 in., Black Plastic

  • Protect your drainage system by blocking leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Use with the 9 in. square catch basin, riser, or low-profile adapter to drain excess stormwater from lawns, landscaped areas, under downspouts, patios, and walkways.
  • Fits 9 in. Catch Basin Drain, 9 in. Riser, and 9 in. Low-Profile Adapter . 121 GPM flow rate. 39.5 sq. in. open surface area. Rated for NDS Class B loads (up to 175 psi) when properly installed—recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph.
  • drain grate fits on catch basins, risers, and low-profile adapters and can be secured with screws. 9 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles.
  • Made to fit on 9 in. catch basins, risers, and low-profile adapters.
Check Stock