Reviews Hvac Clamp Meter

BTMETER BT-7200APP TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV Meter

• ⚡【Monitoring on Your Phone】Smart clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later..
• ⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC.
• ⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full..
• ⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1....

Fluke 117 SureGrip KIT 117 Electrician True RMS Multimeter with TLK-225 SureGrip Master Accessory Kit

• The fluke 116 digital multimeter features a built-in thermometer for HVAC applications.
• Fluke 116 digital multimeter features micro amps to test flame sensors.
• Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage.
• Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage.
• Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on non linear signals.

Inrush Current Clamp Multimeter, BTMETER BT-570N TRMS 5999 Display Clamp-on Amp Meter for AC/DC Voltage Amperage Ohm Temperature Test

• ✅TRUE RMS CLAMP ON MULTIMETER - 6000 Counts accurately measures AC DC current to 1000A , voltage , resistance, capacitance, frequency, duty cycle. Even more testing on Temperature (℃/℉), Inrush Current, Continuity test with buzzer, Diode test..
• ✅BOTH AC/DC CLAMP-ON AMMETER - High resulotion, True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Inrush, Zero out for lower amps measurement, data hold, max/min, auto power off, polarity and low battery indicator..
• ✅SAFE AND EASY TO USE - Overload protection on all ranges. Use this clamp amp meter for unidentified wire testing, Contactless amperemeter test for amperage, Avoid electric shock without touching any wires..
• ✅HIGH ACCURACY AMPERAGE METER - 0.1 amp resolution for AC DC Amps measurement for 200A, 1A amp resolution for 1000A. Ideal inrush clamp meter for troubleshoot electrical mechanical problem of cars motors boat HVAC household appliances safely and accurately..
• ✅LARGE DIGITAL DISPLAY - Well built with backlit LCD for visibility in dimly light areas. Extensible t....

BTMETER AC/DC 1000A Clamp Multimeter, 4000 Counts Digital Clamp-on Meter with Data Logging Measure Amp Volt Ohm Capacitance Frequency Temperature Continuity, Electrical Tester 570T-APP

• ⚡【DC AC Current Clamp Multimeter】This multifuctional clamp-on meter can accurately measures AC DC current with 400A/1000A ranges, 100mA/1A resolution；AC and DC Voltage to 1000V, Resistance to 60M ohms.
• Temperarture -4~1832℉ (℃/℉ Optional), Test voltage 4V, can measure light-emitting diodes, and continuity test..
• ⚡【Sensitive Hall Effect Clamp Sensor】Engineered with hall effect sensor to ensure high precision measurement on DC/AC amperage testing. Built with big jaw caliber size 1.77 inches (45mm), allows you non-contact measuring multiple wires at the same time. ❗Please separate the hot and neutral conductors or they will cancel each other out and give zero amp reading, just clamp on the LIVE line for accurate amperage testing❗.
• ⚡【Electrical Data Logger】Get rid of hand-written notes or complicated maths. With this intelligent clamp amp meter, all electric measurements will be displayed on your phone or tablet, auto graph a trend chart, support to sharing out in Excel, TXT format. This clamp-on ammeter is reliable on remotely troubleshoot electrical problems in HVAC, household, commercial,....

Uei DL389BCOMBO True RMS Clamp Meter DL389B and ATTPC3

• Set includes DL479 trms HVAC/R Clamp meter with 600A AC/ 750V AC, 600V DC, resistance 60mω and temperature -13 ̊ to 752 ̊F (-25 ̊ to 400 ̊C).
• CD100A Combustible Leak Detector that Senses leading combustible, noncombustible and toxic gases.
• Pdt550 digital NSF waterproof Thermometer.
• Attpc3 pipe Clamp adapter &Att70 K-type to input jack adapter.

Testo 770-2 Digital Clamp Meter – Multimeter T-RMS for Hands-Free HVAC Measurements, Current, and Frequency Testing – Voltage Tester incl. Automatic Range Detection and thermocouple Adapter

• The testo 770-2 amprage tester is ideal for electric testing on refrigeration, air conditioning and heating systems and allows for quick and convenient application.
• With its sensitive sensors, the volt meter offers precise readings of TRMS, frequency, as well as inrush, resistance and temperature measurements.
• Thanks to the unique hook-on function the amp clamp can grab hard-to-access wires without using hands. The retractable post of the HVAC tool releases the wires after testing.
• Includes the 770-2 hook-clamp voltage meter, 3 AAA Batteries, one set of measuring cables, and one adapter for type K thermocouples.

Pipe Clamp K-Type Thermocouple Probe, Measures temperature range -40 to 392 °F(-40 to 200 °C), Yellow, Hti-Xintai

• This probe is able to maximum measure surfaces up to 200°C (390°F)..
• Spring-loaded jaw for secure grip on pipes from 0.25" (6.35mm) to 1-3/8" (up to 3.5 cm) diameter..
• The cable extends 38" (98cm) from the handle to the thermocouple connector with the meter..
• Works with any Multimeter, Clamp Meter, and a Thermometer that accept a type K temperature probe..
• Reliable measurements for HVAC and environmental testing..

Fieldpiece SC480 True-RMS Wireless AC Clamp Multimeter

• Inculded in package : Expandable Manual Ranging Stick Multimeter for HVAC/R - HS33, 400A Amp Clamp Accessory - ACH4, Deluxe Silicone Test Leads - ADLS2, Short Alligator Lead Extensions - ASA2, Deluxe Meter Case - ANC1, 9-Volt Battery (installed), Operator’s Manual.

Clamp Meter HVAC Meter with TRMS Tests AC/DC Voltage AC Current Temperature DC micro amps More Klein Tools CL440

• AUTOMATICALLY RANGING true root mean square (TRMS) digital clamp meter for HVAC applications.
• MEASURES 600.0 A AC current and inrush current.
• MEASURES 750V AC/600V DC voltage, DC micro amp, resistance, continuity, frequency, duty-cycle, capacitance, and diode tests.
• K-TYPE thermocouple port for measuring temperature from -328 to 2462 Degrees Fahrenheit (-200 to 1400 Degrees Celsius).
• DETECT AC CURRENT with non-contact voltage tester integrated into the clamp jaw.

Elitech PG-30 Blue Digital Low Pressure Gauge for HVAC Refrigerant with Backlight -14.5~500 PSI 1/8” NPT

• 1.【Manifold Gauge Set for Refrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
• 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
• 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c manifold gauge set built-in 89 kinds of refrigerant pressure....

Digital Clamp Meter Bluetooth Clamp Multimeter ac dc amp Meter AP-7200APP Auto-ranging 6000 Counts Amp Meter Voltage Tester Measures Amperage, Volt, Capacitance, Continuity, Ohm Clamp-on Ammeter

• ✅【Multifunction Clamp Meter】 6000 Counts Auto-range AC/DC amps clamp multimeter with the DC Voltage range:600mV~600V, AC Voltage range:6V~600V, AC/DC Current: 60A~400A.
• Ideal Non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, HVAC, vehicle boat motor diagnosis..
• ✅【Bluetooth Amp Meter】 This clamp meter can be connected with mobile phone by Bluetooth, Auto pair with Android / IOS phone via bluetooth nearby, It's easy to install, just scan the QR code or search “AiLink” in Google play or APP Store, so you can measure data and analyze it by mobile phone APP. NOTE: The mobile phone APP can be installed in iphone 4S IOS 7.0 or android 4.30 system and up.the MAX distance: 10～15m..
• ✅【NCV Detection Function】Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
• The NCV button lies on the left side of the rotary switch. Simply place your thumb on it and push.
• When the live voltage ≥ 90V AC rms, the lamp light will light up together with sound..

Klein Tools CL120KIT Electrical Tester/Auto-Ranging Digital Clamp Meter Kit, GFCI Tester, Line Splitter, Pouch, Leads, 3 x AAA

HITNRUN Phase One

• Efficient: The testo smart probe set offers precise measurements and calculations for heating and cooling systems, making it ideal for all HVAC/R contractors and technicians.
• Complete Set: Includes two testo 115i pipe-clamp thermometers and two testo 549i high pressure gauges, as well as a protective hard-shell case with precise-fit compartments.
• Testo 115i: With a grip of up to 1.5”, the wireless thermometer provides quick and reliable temperature and flow and return temperature measurements in pipes.
• Testo 549i: The pressure meter enables accurate readings for high and low pressure. The 45-degree connector simplifies servicing and troubleshooting – without the need for hoses.
• Smart App: The free testo Smart Probes App is a powerful tool that allows you to remotely read and log measurements and create custom reports which can be saved and shared.