Reviews Hubcap Coater

Dual Edge Aluminum Emulsion Scoop Coater for Silk Screen Printing Coating Tool (6 Inch)

  • The emulsion Scoop Coater is the coating tool that used for silkscreen printing, 6 Inch Recommend for Frame Size: 9" x 14” OD..
  • The Dual Edges Scoop coater are designed to use for silk screen of all mesh count (sharp edge for higher mesh counts and rounded edge lower mesh counts).
  • Made from hard anodized aluminum with plastic end guidance caps.
  • Plastic end caps of the scoop coater is designed for easy and comfortable handling while providing guidance to coat a smooth layer of emulsion on your screens.
  • These scoop coaters also come with two special rubber edge protectors to keep your scoop coater smooth and prevent cuts or scratches..
Check Stock

KBS Coatings 57201 Gloss Black Ultimate Frame Coater Kit, Inside Out Rust Protection for Entire Truck or Car Frame

  • The Ultimate Frame Coater Kit comes with everything you need: KBS Klean Quart, RustBlast Quart, RustSeal Gloss Black Quart, Cavity Coater Aerosol, Cavity Wand, Nitrile Gloves, Brushes, Stir Stick..
  • The Ultimate Frame Coater Kit is designed to give you want you need to stop rust from the inside out. RustSeal on the outside and Cavity Coater on the inside..
  • RustSeal is a waterproof coating that is strengthened by repeated exposure to moisture..
  • RustSeal is highly abrasion and chemical resistant. RustSeal also repels fuels, oils, most acids and alkalis, and graffiti!.
  • RustSeal can be brushed, rolled or sprayed. RustSeal featured superior flow out making a brushed surface look like it has been sprayed..
Check Stock

KBS Coatings 60304 Ford Corporate Blue Motor Coater Engine Paint - 1 Pint

  • Motor Coater is easy to apply, offers superb coverage and yields a self-leveling (brushable) professional looking finish..
  • Motor Coater colors are an exact match for the original color offering a rich, deep factory finish..
  • Motor Coater is very durable protecting your engine from chips, chemicals and heat..
  • Oil, Transmission Fluid and Gas Resistant.
Check Stock

KBS Coatings 75101 Cavity Coater and Wand, 16 fl oz.

  • KBS Cavity Coater is the Perfect Solution for hard to reach areas that are prone to rusting.
  • Cavity Coater provides a self healing film which renders over 4000+ hrs. salt spray protection (meaning Insane Rust Protection) ...over 4 times the protection of conventional cavity waxes.
  • Use Cavity Coater with a KBS Cavity Wand to give long lasting protection for those hard to reach enclosed cavities such as rocker panels, boxed frames, inside doors And fenders, deck lids, tailgates...and more.
  • Resists alkaline solutions, most chemical and acid vapors, road salt, steam, salt water. Wicks and penetrates where primers and topcoats cannot!.
  • Creeps into Welds and Seams. 4000+ Hrs. Salt Spray (Insane Rust Protection)!.
Check Stock

8 Inch Chrome Dome Shaped Rear Hubcap for 5/8 Inch Axle Studs

  • 8 Inch Chrome Dome Shaped Rear Hubcap For 5/8 Inch Axle Studs.
  • High Quality Hubcap MADE OF High Quality Chrome-Plated Steel.
  • FITS MOST Trucks With 5/8 Inch Axle Studs.
  • WHAT'S INCLUDED: (1) Chrome-Plated Steel Rear Hubcap - Dome Shape.
Check Stock

XhuangTech 4Pcs/Set Car Chrome Wheel Rim Skin Cover Hub Caps Hubcap Wheel Cover (Red & Black, 15inch)

  • Easy, secure installation utilizing a micro-adjustable retention system for a perfect custom fit.
  • Made by high quality ABS plastic and patented steel ring retention clip design. Designed to stay in place no matter the weather or road conditions..
  • It is a best way to save money, improve your vehicles overall appearance and protcet the steel wheel.Very easy to clean, just use regular automotive soap or water..
  • This product is great for replacing lost, damaged, or missing hubcap on your vehicles.
  • Easy Install to intallation: Carefully remove previous hubcaps with a Flathead.
  • Place the retention ring in the hubcap with the curves aligning.
  • Locate the air valve and match with the curve on the retention ring on new hubcap.
Check Stock

Transformers Generations Selects War for Cybertron Earthrise Deluxe Hubcap - Exclusive

  • Exclusive! Minibot. Wrecker. Lover? Transformers Generations Selects bring back favorite characters from across the globe as exciting entrants into the Cybertronian Wars..
  • Minibots join the battle with Transformers Generations Selects War for Cybertron Earthrise Deluxe Hubcap - Exclusive! This transforming figure is compatible with the C.O.M.B.A.T. system blast effects (included with Battle Masters figures, sold separately.) Figure transforms from car to robot and back again. Collect them all! Ages 8 and up..
  • This special edition WFC-GS13 Hubcap figure is the first modern era update inspired by the 1986 Mini-Vehicle mail-away..
  • He even features the classic orange face unique to the original toy release. Hubcap is a character with some serious identity issues. Not only is he often confused with Bumblebee for being of similar size and color, but the original 1986 mail-away mislabeled him as Cliffjumper. Not that anyone knew who Hubcap was at the time anyway..
  • Though he appeared in the 1986 Mini-Vehicle assortment, he was only introduced into Transformers entertainment in 2007 with the release of IDW's Megatron Origin Issue #3..
Check Stock

Tuningpros WC1P-16-721-S - Pack of 1 Hubcap (1 Piece) - 16-Inches Style Snap-On (Pop-On) Type Metallic Silver Wheel Covers Hub-caps

  • Fit on snap on type or pop on type 16-Inches steel wheel only. NOT fit on size other than 16-Inches. NOT fit on bolt-on type steel wheel. Not fit on screw-on type steel wheel too. Come with Single (1pc) Hubcap Only and Come With bulk package (No Original Box Included)..
  • Make with high quality ABS plastic for long lasting durability.
  • Adjustable retention ring to assure maximum grip to wheel.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Retention ring must be installed to secure the wheel cover on steel wheel.
  • No special tools required (Not recommended using hammer or screw driver for installation).
  • Sold as Single Piece of 1 x 16-Inches Hubcaps.
Check Stock

Tuningpros WC1P-15-721-S - Pack of 1 Hubcap (1 Piece) - 15-Inches Style Snap-On (Pop-On) Type Metallic Silver Wheel Covers Hub-caps

  • Fit on snap on type or pop on type 15-Inches steel wheel only. NOT fit on size other than 15-Inches. NOT fit on bolt-on type steel wheel. Not fit on screw-on type steel wheel too. Come with Single (1pc) Hubcap Only and Come With bulk package (No Original Box Included)..
  • Make with high quality ABS plastic for long lasting durability.
  • Adjustable retention ring to assure maximum grip to wheel.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Retention ring must be installed to secure the wheel cover on steel wheel.
  • No special tools required (Not recommended using hammer or screw driver for installation).
  • Sold as Single Piece of 1 x 15-Inches Hubcaps.
Check Stock

Tuningpros WC1P-15-1026-S - Pack of 1 Hubcap (1 Piece) - 15-Inches Style Snap-On (Pop-On) Type Metallic Silver Wheel Covers Hub-caps

  • Fit on snap on type or pop on type 15-Inches steel wheel only. NOT fit on size other than 15-Inches. NOT fit on bolt-on type steel wheel. Not fit on screw-on type steel wheel too. Come with Single (1pc) Hubcap Only and Come With bulk package (No Original Box Included)..
  • Make with high quality ABS plastic for long lasting durability.
  • Adjustable retention ring to assure maximum grip to wheel.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Retention ring must be installed to secure the wheel cover on steel wheel.
  • No special tools required (Not recommended using hammer or screw driver for installation).
  • Sold as Single Piece of 1 x 15-Inches Hubcaps.
Check Stock

Tuningpros WC1P-15-1006-S - Pack of 1 Hubcap (1 Piece) - 15-Inches Style Snap-On (Pop-On) Type Metallic Silver Wheel Covers Hub-caps

  • Fit on snap on type or pop on type 15-Inches steel wheel only. NOT fit on size other than 15-Inches. NOT fit on bolt-on type steel wheel. Not fit on screw-on type steel wheel too. Come with Single (1pc) Hubcap Only and Come With bulk package (No Original Box Included)..
  • Make with high quality ABS plastic for long lasting durability.
  • Adjustable retention ring to assure maximum grip to wheel.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Retention ring must be installed to secure the wheel cover on steel wheel.
  • No special tools required (Not recommended using hammer or screw driver for installation).
  • Sold as Single Piece of 1 x 15-Inches Hubcaps.
Check Stock

Tuningpros WC1P-15-1026-B - Pack of 1 Hubcap (1 Piece) - 15-Inches Style Snap-On (Pop-On) Type Matte Black Wheel Covers Hub-caps

  • Fit on snap on type or pop on type 15-Inches steel wheel only. NOT fit on size other than 15-Inches. NOT fit on bolt-on type steel wheel. Not fit on screw-on type steel wheel too. Come with Single (1pc) Hubcap Only and Come With bulk package (No Original Box Included)..
  • Make with high quality ABS plastic for long lasting durability.
  • Adjustable retention ring to assure maximum grip to wheel.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Retention ring must be installed to secure the wheel cover on steel wheel.
  • No special tools required (Not recommended using hammer or screw driver for installation).
  • Sold as Single Piece of 1 x 15-Inches Hubcaps - Matte black finish.
Check Stock

TuningPros WSC-006S15 Hubcaps Wheel Skin Cover 15-Inches Silver Set of 4

  • Adjustable retention ring to assure maximum grip to wheel.
  • Make with high quality ABS plastic for long lasting durability.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Sold as a complete set of 4 x 15-Inches Hubcaps.
Check Stock