Reviews Hub Reduction Gear

Ologymart 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear

  • Includes spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar.
  • Pieces 75, ideal for DIY science and small production, product design and mechanical model.
  • 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one).
  • 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one).
  • 5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar.
Check Stock

FMS RC Crwaler 1/24 Scale FCX24 Power Wagon Butcher RTR 4WD 2.4GHz Brushed Offroad RC Car Model Vehicle Hobby Grade Remote Control Car with LED Lights Transmitter Battery USB Charger Included (Blue)

  • ...trength nylon, the overall weight is lighter and the strength is higher. Portal axlecan increase the ground clearance of the differential tooth pack and improve the passability..
  • 【Two-speed Transmission】: The two-speed gearbox uses the CH3 of the remote control and is operated by a 9G steering gear. The low gear reduction ratio is 99, The torque output is strong, and easy for extreme climbing. The high gear reduction ratio is 24.75, Maximum speed up to 8km/h. The speed is higher than that of all similar products currently on the market..
  • 【24 Bearings】: Stainless steel ball bearings are always the favorite of players. Considering that players need to completely disassemble the whole car to upgrade the bearings in future, which is slow and laborious, FCX24 chooses to pre-install the whole car with a total of 24 bearings, which does not need to be disassembled and re-upgraded, saving time and effort, and addresses the concern once for all..
  • 【More Fun】: RTR version, ready to play. The FCX24 rc crawler is equipped with a straight axle by default, but the planetary gear differential can also be replaced with high-viscosity silicone oil to simulate the driving effect of an LSD limited-slip differential. 2.4G 4-channel digital proportional remo....
Check Stock

Brembo 09.9547.33 Front Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

Brembo 09.9313.33 Front Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

Brembo 09.9764.23 Coated Rear Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

Brembo 09.A190.13 Rear Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

Brembo 09.B386.13 Front Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

DC 12V Gear Motor High Torque Slow Speed Micro Electric Motor Gearbox 3 RPM 4mm Shaft Diameter

  • INDUSTRIAL GRADE MATERIAL---Adopting industrial grade raw material, rather than ordinary material, the speed reduction gear motor could be used for a long period on bad conditions like high temperature and low temperature.
  • LOW HEAT---With professional motor, the speed reduction gear motor has large range of voltage adjustment, low heat, low noise, small size, high torque, reversible, and easy to install.
  • MAINLY USED FOR---With mini size whose diameter is 40 mm, the speed reduction gear motor could be use for small display stand, such as mobile phone display.
  • EXCELLENT AFTER SALE SERVICE---Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you.
Check Stock

DC 12V Speed Reduction Gear Motor Electric High Torque Gearbox Motor Micro Multiple Models Reducer Replacement Motor (30RPM)

  • 【Widely Used】Gear motors can be found in many different applications, and are probably used in smart toy car, robot, printer,etc.
  • 【Multiple Speed Options】There are five reduction gear motors of different speed and you can choose the one you need,Speed: 3.5RPM, 15RPM, 30RPM, 70RPM.
  • 【High Torque】 Gear motors are primarily used to reduce speed in a series of gears, which in turn creates more torque.
  • 【Full Metal Gears】The metal gear in the gear box has a strong carrying capacity, high temperature resistance, wear resistance, ruggedness and other characteristics effectively protect the main body of the worm gearbox motor.
  • 【Specifications】Voltage: 12V DC--RPM: 3.5RPM/15RPM/30RPM/70RPM--Diameter: 37mm--Gearbox reduction ratio: 1:30 --- 1: 360--Starting voltage is 3.5V.
Check Stock

ARRMA Slipper Plate & Hub Set ARA310946

  • Arrma ARA310946 - Slipper Plate & Hub Set, 1/10.
  • Features: Precision manufactured parts for smooth and consistent operation Slipper hubs constructed from high-quality aluminum for optimum heat....
  • Includes: (1) Front Slipper Hub (1) Rear Slipper Hub (1) Slipper Plate (1) Slipper Spur Gear Bush (installed).
  • Part number(s) included (in factory packaging): ARA310946.
Check Stock

Brembo 09.C407.13 Front Disc Brake Rotor

  • High Carbon cast iron minimizes noise and vibration and provides maximum performance and enhanced driving comfort.
  • Includes a fixing screw kit with all the necessary hardware for simple, more efficient and safer installation.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
Check Stock

UNK Propeller 14.25 x 21 Prop for Mercury Mercruiser Alpha One 3-Blade Aluminum with Complete hub kit 14 1/4 x 21

  • 14.25" diameter x 21" pitch Aluminum, 3-blade, RH rotation prop.
  • Includes 15 spline hub kit (hub, splined hub, thrust washer, prop nut and keeper).
  • Fits Mercruiser Alpha One (gen 1 and 2), Bravo One 4 3/4" Gear Case Thru-Hub Exhaust with 15 Tooth Spline.
Check Stock

DRIFT MANIAC 8 Speed Freewheel 11-32T Epoch Ebike

  • 8 speed freewheel 11-34, 11-13-15-18-21-24-28-34 Teeth.Compatible with hub motor e-bike, mountain bike, cargo bike, city bike, commuting bike.Thread hub offset >=Freewheel stack height(38.5mm)+1.5mm.
  • Large 34 teeth sprocket, create bigger gear range. Make climbing even easier..
  • Ebike specific freewheel 8 speed,Made of high strength SPHC and durable chromoly steel. Nickel plated surface treatment..
  • Total height: 38.5mm+/-0.2mm, Weight:601g+/-1g,hot rolled steel cogs(sprockets) + 3 layer nickel plated, steel clutch mechanism..
  • Designed for E-bike, ratchet mechanism is high strength and durable.Speed range 309%. Fits standard motorized rear hub with threaded freewheel mount, compatible also with standard threaded bicycle freewheel hub..
Check Stock