YAKAMOZ 30Pcs Thread Repair Insert Kit Damaged Threads Rethreading Drill Bit Taps Tool Set for Helicoil Type Metric M6 Internal Screw Holes Repairing
- Master helicoil thread repair kit used for creating stronger internal threads in all metals, composites, polymers and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
- 304 Stainless thread inserts create longer lasting durable threads, increase the possibility of higher torque application in weaker metals..
- Master thread repair kit includes a collection of tools including HSS drill, tap, thread inserts, installation tool, break pin tool..
- Metric Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tools.
- Includes 25 Each thread inserts: M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
- SAE Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tool.
- Includes 25 Each thread inserts: 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14.
Check StockXtremeAmazing Set of 5 HSS NPT Pipe Tap Set 1/8, 1/4, 3/8, 1/2 and 3/4 Inch
- Taps Size: 1/8''-27 NPT, 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT.
- High quality HSS material, cutting edges clean and sharp..
- With a center hole drilled in all taps, easy to use in a drill press..
- Package Contents: 5 x NPT Pipe Tap SetHigh quality HSS material, cutting edges clean and sharp..
Check StockRocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set
- - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance..
- - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads..
- - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap..
- - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them..
- - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair..
Check Stock6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS
- Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
- Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
- Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
- Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
- Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check StockProlinemax 18 Pc Metric HSS Tap & Drill Set
- Tap Sizes: M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.06, M4.0 x 0.70, M5.0 x 0.80, M6.0 x 1.0,M8.0 x 1.25,M10.0 x 1.50,M12 x 1.75.
- Drill Metric Sizes: 2.05,2.50,2.90,3.30,4.20,5.00,6.70,8.50,10.2mm.
- Case Overall Dimension: 8''L x 4-3/8''W x 1-1/4''H *Estimate Only*.
Check StockWolfride 9pcs Titanium Spiral Flute Tap Set Metric Machine Tap Set M2 M2.5 M3 M4 M5 M6 M8 M10 M12
- Made from HSS6542, coated with titanium, high hardness and rust resistance, long service life..
- Tap Size: M2*0.4, M2.5*0.45, M3*0.5, M4*0.7, M5*0.8, M6*1, M8*1.25, M10*1.5, M12*1.75..
- Spiral flutes, good chip removal effect, can tap to the bottom of the blind hole. M2-M6 pointed head, M8-M12 flat head..
- Can be used for processing iron, aluminum and other materials. Like stainless steel, cast iron and other difficult to machine materials, please choose cobalt taps..
- Used on drilling machines, tapping machines, CNC and milling machines, not for hand electric drill..
Check StockCAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8
- Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
- ✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
- ✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
- ✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
- ✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.
Check StockABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More
- ...ze) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
- Stepped tap ensures correct alignment of cutter in existing spark plug hole.
- Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
- EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
- Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
- Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
- EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch (24.4cm x 12.1cm x 3.8cm) metal carrying case with a plastic molded insert tray for easy transportation, safe storage, and quick organization.
- PACKAGE CONTENTS: Package includes drill taps (14mm), tap holder, insert installer, wedge and handle, inserts, Allen wrench hex key, and storage case for your convenience.
Check StockSWANLAKE 166PCS Thread Repair Tool Kit,HSS Drill Helicoil Repair Kit Metric M5 M6 M8 M10 M12
- 1.This 166pcs Thread Repair kit is for repairing damaged or stripped Internal screw threads..
- 2.Set includes :5 installation tools,5 break pin tools,5 twist drills ,5 taps,1 hex key and 145pcs wire thread inserts (M5,M6,M8,M10,M12)..
- 3. The installation tools in this kit is made by high-speed steel for superior handling.one HSS tap for each size, one HSS drill for each size, 2 Insert tools for each size, Thread Inserts for each size..
- 4.The kit has 166 Pieces, all made according to professional standard.its suitable for engine repair and other automotive applications..
- 5.It packed in a convenient steel carrying case, easy and fast in storage..
Check Stock20 Piece Metric Tap and Die Set Manual Tooth Opener Alloy Steel Die Set with Green Storage Case Tapping Thread Cutting Kit for Garage
- 10 Different Sizes: M1, M1.2, M1.4, M1.6, M1.7, M1.8, M2, M2.5, M3, M3.5 (coarse thread) for tapping various threads..
- Standard metric thread design, clear and tidy, no burr, provide rapid chip removal for efficient threading..
- With these machine hand taps, you will have a smooth tapping experience..
- These micro taps mainly used for clocks and watches, and low hardness of wood and soft metal hole processing..
- Made of HSS6542 high-speed steel which is durable, high wear, heat resistanceand for long life use..
Check Stock8V1-32 Die Schrader Tyre Valve Thread ABBOTT
- Brand new metric HSS right hand thread tap..
- If there is anything taps or dies you need, do not hesitate to contact us. There are a variety of sizes available but they are not all listed..
Check StockM50 x 1.5 mm Pitch Metric Right Hand Thread Die ABBOTT
- Brand new metric HSS right hand thread tap..
- If there is anything taps or dies you need, do not hesitate to contact us. There are a variety of sizes available but they are not all listed..
Check StockM4 x 0.8 mm Pitch HSS Right Hand Tap Useful Thread Tool
- Brand new metric HSS right hand thread tap..
- If there is anything taps or dies you need, do not hesitate to contact us. There are a variety of sizes available but they are not all listed..
Check Stock