Reviews Hot dipped Galvanized Lag Bolts

American Ground Screw U-Model Premium No Dig Ground Anchor - Screw in Post Stake - 27\

• Concrete Free! No need to bother with digging, mixing, or waiting for concrete to set. The U-Model is 100% loadable immediately after installation.
• Securely Holds 4x4 Posts, Five Lag Bolts Included.
• Made with Hot-Dipped Galvanized Steel to Guarantee Structural Integrity for Decades to Come!.

Square U-Bolt Zn3/8x4x7

• SIZE: 1/2" D x 3 -1/16" W x 3-5/16" L (Exactly AS Pictured).
• CONTENTS: (4) U-bolts with (8) each flat washers, lock washers, and Heavy Hex Head Nuts (ALL hot dipped galvanized).

1/2 Lock Washer Split Ring Hot Dipped Galvanized Steel Qty 1000

• Lock Washer Split Ring Hot Dipped Galvanized Steel.
• Split ring lock washers are used to prevent nuts, bolts and screws from vibrating loose..
• Lock washers are split at a certain point and bent giving them a helical shape, creating a spring-like effect.
• In a variety of materials, these lock washers are pressed down adding extra pressure to the nut or bolt and material. This extra pressure creates a resistance to rotation..
• Hot dipped galvanized steel offers superior corrosion resistance and is well suited for harsh environments, HDG should only be used with other HDG fasteners.

Chain Link Fence Gate Wheel for Metal Tube Swing Gate - 6' Hot Galvanized Heavy Duty Gate Wheels for Cattle Fence Gate, Tooltriz

• 【High support weight】An actual high-strength fence gate wheel with the capacity of 550 pounds. The wheel's width and curved rim make it adaptable to all kinds of roads, gravel road, dirt road, and cement road..
• 【Good structure】The tire is real solid rubber with good elasticity and quiet function. Bearings are standard ball bearings, bearing capacity and service life are much higher than other bearings..
• 【Hot-dip galvanized thick frame】The wheel frame adopts new technology, high strength, and hot-dip galvanized.
• longer rust prevention time. In addition, the steel plate is more thikcer than ordinary products..
• 【Standardized chain link fence parts】After a few years, it is easy to buy and find accessories if the bearing or wheel is damaged, save you money..
• 【Stainless steel bolts with locknuts】This gate wheel adopts Stainless steel bolts and stainless steel locknuts. Therefore, there will not happen the gate wheel can't disassemble because of rust..

Turnbuckle Hook, 3/8 x 6\ Hot Dipped Galvanized Steel Jaw and Jaw Turnbuckle, 1190 lbs Working Load Limit, Heavy Duty Turnbuckles - Durable, Weather Resistant

• 【Long-Lasting】Our Galvanized Turnbuckles uses hot dipped galvanization to protect the steel from humidity, corrosion, and other elements. Suitable for outdoor applications.No other kind of protective coating can give this much longeviy to steel, so you’re sure to use our turnbuckle for years.
• 【Safety Tested】Safety is our top priority. All of our products, including this galvanized steel turnbuckle, have passed EN71 test, CE and RoHS safety tests.Our Galvanized Turnbuckles have a strong construction and a galvanized finish that resists rust and corrosion.
• 【Comes With Nuts and Bolts】This jaw and jaw turnbuckle comes with nuts and bolts that are made of the same durable hot tipped galvanized steel.Features a jaw on each end which is fitted with a nut and bolt or a pin & cotter pin assembly.
• 【Multi-Application】This galvanized turnbuckle has a body opening that measures 18 inches, and a working load limit of 1190lbs. You can use this to tension a zipline, fix a seat, straighten a tree, create a gate for your hunting cabin, or at home.Ideal for marine and industrial use.Can also be used for recreational activities like zip lining.The list goes on!.
• 【Lifetime Warranty】We make sure that all the products we put out are of the best quality an....

VEITHI Boat Cleats 8 inch (4 Pack) - Hot Dipped Galvanized Boat Cleats, Rope Cleat, Anchor Line Cleat - Boat Dock Cleats Ideal for Boat Docks, Decks, Piers for Tying up Boats, Marine Decor

• Rough Cast Hot Dipped Galvanized Iron -These are well durable galvanized cleats, 100% protected against rust. Include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.These can hold their own against the weather..
• Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
• Size&Hardware- These dock cleats 8 inch L x 1.9 inch H ,base measures 2.8 inch x 1.2 inch.
• mounting holes 1.65 inch center to center,boat cleats with hardware - M8x 4.1 inch bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
• Wide Footprint for Strength - Dock cleats 8 inch galvanized large bottom footprint for additional strength,Perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
• Home Nautical Decor- Galvanized boat cleats make your home stand out.
• perfect for maritime, beach, garden, pool, coastal decorations.
• use them as cabinet pulls, boat cleat towel rack, rustic coat hanger, curtain tie-backs, nautical coat hooks..

Amarine Made 4 Pack of 6 Stainless Folding Cleat, Flip-up Dock Cleat Retractable Cleats-Enhance Safety and Appearance of Any Boat

• Rough Cast Hot Dipped Galvanized Iron -These are well durable galvanized cleat, 100% protected against rust. include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.these can hold their own against the weather..
• Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
• Wide Footprint for Strength - Boat dock cleats 6 inch large bottom footprint for additional strength,perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
• Size&Hardware- These dock cleats 6 inch L x 1.3 inch H ,base measures 2.2 inch x 0.9 inch.
• mounting holes 1.25 inch center to center,boat cleats with hardware - M6x 3.25 inch(83mm) bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
• Home Nautical Decor- Galvanized boat cleats 6 inch make your home stand out.
• perfect for maritime, beach, garden, pool, coastal decorations.
• use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, c....

Hot Dipped Galvanized Steel Jaw and Jaw Turnbuckle 3/8 x 6 Turnbuckle Heavy Duty 1200 lbs Working Load Limit 3/8 Threaded Diameter x 6in - Durable Weather Resistant Turnbuckles

• LONG-LASTING - Our turnbuckle uses hot dipped galvanization to protect the steel from humidity, corrosion, and other elements. No other kind of protective coating can give this much longeviy to steel, so you’re sure to use our turnbuckle for years!.
• SAFETY TESTED - Safety is our top priority. All of our products, including this galvanized steel turnbuckle, have passed EN71 test, CE and RoHS safety tests..
• COMES WITH NUTS AND BOLTS - This jaw and jaw turnbuckle comes with nuts and bolts that are made of the same durable hot tipped galvanized steel..
• MULTI-APPLICATION - This galvanized turnbuckle has a body opening that measures 18 inches, and a working load limit of 1,200lbs. You can use this to tension a zipline, fix a seat, straighten a tree, create a gate for your hunting cabin, or at home. The list goes on!.
• LIFETIME WARRANTY - We make sure that all the products we put out are of the best quality and give good value for money. However, if you have trouble with this jaw and jaw turnbuckle, we’re offering a lifetime warranty!.

Smart Marine 13lb Fluke Anchor Kit with Anchor, 6.5 feet of Chain, 3/8' Shackles, and 98' Rode

• 13 lb Hot Dipped Galvanized Fluke Anchor.
• 6.5 Feet of 5/16" (8mm) chain - Hot Dipped Galvanized.
• 2 3/8" 10mm Shackles - Hot Dipped Galvanized.
• 98' Anchor Line - three strand - 3/8" (10mm).

MarineNow Deluxe Portable Fluke Style Anchor Kit Choose 5, 8.5 or 13 lb (13 lb)

• 13 lb Hot Dipped Galvanized Fluke Anchor for Boats 20 - 32ft.
• 98' Anchor Line - three strand - 3/8" (10mm) with stainless steel rope thimble (316 marine grade).
• 6.5 Feet of 5/16" (8mm) chain - Hot Dipped Galvanized.
• 2 3/8" 10mm Shackles - Hot Dipped Galvanized.
• Anchor measures 24.5" tall, 18" wide, and 6" deep..

Treehouse Brackets & Hardware (Double Knee Brace - 1.25\ Pipe)

• Bracket surrounds the mounting pipe which greatly increases bracket strength vs. industry standard.
• Tough, corrosion resistant, textured powdercoat finish.
• Includes (4) 5/8"x5" hot dipped galvanized carriage bolts, washers, lock washers, and nuts.

2 Hole Pillow BLOCK-62MM

Dock Edge 2808-F Dock Cleat, 8' Galvanised

• Hexagonal hole shape prevents the head of the bolt from turning when securing the cleat.
• Bolts mount flat to surface of the cleat with recessed holes.
• Large bottom footprint for additional strength.