Reviews Hot Water Solenoid Valve

Electric Solenoid Air Valve G1/8 Vacuum Solenoid Valve Sealing Reduce Wear Resistamt Copper Coil for Industrial Use

  • COPPER FULL TURN COIL: Solenoid valve for a time use is not easy to hot, possess durable life, more durable than ordinary solenoid valve.
  • WEAR RESISTANT: Between solenoid valve internal moving parts has excellent softening oil, effectively reduce wear between parts.
  • RELIABLE SEALING: Solenoid valve using excellent sealing , to ensure that the product performance is stable and reliable, lasting.
  • WIDE APPLICATION: Used for rail transport, vehicle manufacturing, ship engineering, mechanochemistry, mining equipment, biomedicine.
  • AVIATION CAST ALUMINUM VALVE BODY: Die cast aluminum valve body with solid material, the is finely polished, the inner wall is also polished several times, to ensure that the interface is without burr and no air leakage.
Check Stock

Watts Brass & Tubular 2T-M2 Washing Machine Water Shut Off Valve

  • WASHING MACHINE SHUT OFF VALVE: This manual washing machine shutoff valves are used in washing machine applications to manually control water flow and pressure from the hot and cold-water supply piping to the flexible hoses feeding a washing machine..
  • WATER SHUT OFF VALVE: It prevents the washing machine hoses from bursting preventing water damage in the home. Inlet adapter fittings allow either 1/2″ threaded or 1/2″ solder copper x 3/4″ washing machine hose threads on hot & cold-water outlets..
  • SINGLE LEVER CONTROL SHUT OFF VALVE: It is manual, single control lever controls both hot and cold water simultaneously, shuts off water protecting machine parts and water supply hoses.
  • INSTALLATION: It can be installed in a more convenient spot than old boiler drain type hot and cold-water shutoffs which are often installed in hard to reach places..
  • BALL-TYPE DESIGNED VALVE: The ball-type design allows it to be opened to any position to throttle water flow and minimize harmful water hammer and banging pipes caused by fast closing washing machine solenoid valves..
Check Stock

DIGITEN DC 12V 1/4 Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed

  • DC 12V 1/4" Quick connect Solenoid valve..
  • Working pressure:0.02-0.8Mpa. Its working temperature:32-158℉ (0-70℃)..
  • It will become hot because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60℃. If you want it works long hours, you should find a N/O normally open solenoid valve..
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • ...apacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • Complete Accessories - steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply, Solenoid valve connecting line, Spare sealing ring, Spare atomize piece, 4 snap suckers, Check valve, wrench, Stainless steel U-shaped tube, Stainless steel atomizer, base, air tube (1.5 m)....
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • ...eel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • [Safety First]Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • [Refine The Bubbles]Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • [Low Cost]You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • [Complete Accessories]Steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply, Solenoid valve connecting line, Spare sealing ring, Spare at....
Check Stock

Fankerba Normally Open Pressure Solenoid Water Valve for Water Air - DC 12V 1/2 / Pure Copper Coils

  • This is pressure solenoid valve:it is suitable for tap water supply..
  • This is normally open solenoid valve:water will be supplied without electricity, and the solenoid valve will not work after power is turned on..
  • It is 67.7mm/2.67 inch length between the two joints.
  • it is 69mm/2.7 inch height between the up and down..
  • The valve body is plastic and the joint is copper.
Check Stock

Wyin 4L Aquarium Co2 Generator System with Single Gauge Display Pressure Gauge, DIY Co2 Generator System Kit, Automatic Pressure…

  • ...remove the air tube, convenient for your use.
  • 【Safety Protection】 The Wyin co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve makes you away from the danger of solenoid valve leakage and protects your safety. The u-shaped pipe connecting the air pipe is equipped with a one-way valve to prevent water backflow.
  • 【Fine the Bubbles】 Wyin CO2 generator system is equipped with an atomizer to refine the bubbles so that they can be easily dissolved in water and absorbed by plants, keeping your aquarium full of life. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • 【What's in The Box?】 The box you receive will come with a cylinder, stainless steel pressure-reducing valve, filter, bubble counter, solenoid valve, solenoid valve power supply, solenoid valve connection cable, spare sealing ring, spare atomizer piece, 4 snap-on suction cups, one-way valve, stainless steel U-tube, 2 stain....
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

WR57X10032 WR57X33326 Refrigerator Water Inlet Valve WR57X10032 Dual Solenoid Valve Compatible with Ge Refrigerator Replace WR57X33326 WR57X10040 WR57X10064

  • ★★WR57X10032 WATER INLET VALUE:WR57X10032 double solenoid water valve, one solenoid valve allows water to flow into the ice maker, and the other....
  • ★★DIRECT REPLACEMENT:WR57X10032 water inlet valve directly replaces refrigerator water valve WR57X33326, WR57X10032, AP6995571, WR57X10040,....
  • ★★COMPATIBLE MODELS:WR57X10032 compatible with most brands such as G-E:....
  • ★★INSTALL AND REPAIR:WR57X10032 water inlet valve can solve the following problems: the solenoid is faulty.
Check Stock

ZRDR 4L Co2 Generator System with Dual Gauge Display Pressure Gauge,DIY Co2 Generator System Kit, Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium, Stable Output

  • ...remove the air tube, convenient for your use.
  • 【Safety protection】 The zrdr co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve, make you away from the danger of solenoid valve leakage, protect your safety.
  • 【Refine The Bubbles】Our CO2 aquarium kit is equipped with an atomizer, which can purify bubbles, make them easily soluble in water and absorbed by plants, and make your aquarium full of vitality. We also gave you an extra atomizer as a replacement to extend the service life of the product. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • 【What's in The Box?】 The box you receive will come with a cylinder, stainless steel pressure-reducing valve, filter, bubble counter, solenoid valve, solenoid valve power supply, solenoid valve connection cable, spare sealing ring, spare atomizer piece, 4 snap-on suction cups, one-way valve, stainless steel U-tube, 2 stainless steel atomiz....
Check Stock

W11165546 Washer Water Inlet Valve for Whirlpool Kenmore- Replace 33090105 W10599423 W10758828 W10839828 W11096267 W11165546VP

  • 【Function】 W11165546 Water Inlet Valve has two threaded ports that are connected to hot and cold water hoses at the back of the washing machine. Each port is controlled by a solenoid valve that sends electric power to open and close the flow of hot and cold water based on settings for the wash temperature and signals from the water-level switch.
  • 【Package Includes】 1 * W11165546 Washer Water Inlet Valve.
  • 【Failure Phenomenon】 Malfunctions in the whirlpool water inlet valve can cause a washer to not fill properly, fail to run, or wash at the incorrect water temperature.
  • 【Compatibility】 W11165546 Water Inlet Valve fit Brand Kenmore: 11029133410, 11028132410, 11028132411, 11028132412, 11028132413, 11028133410, 11028133411, 11028133412, 11028133413, 11029132411, 11029132412, 11029132413, 11029133411, 11029133412, 11029133413.
  • 【Compatibility】 W11165546 Water Inlet Valve fit Brand Whirlpool: WTW8500DC4, WTW8500DC5, WTW8500DR4, WTW8500DR5, WTW8500DW4, WTW8500DW5, WTW7500GW0, 7MWTW8500EC2, WTW7500GC0, WTW8700EC1, WTW7500GC2, WTW7500GW2, 7MWTW8500EC0, 7MWTW8500EC1, WTW8500DC0, WTW8500DC1, WTW8500DC2, WTW8500DC3, WTW8500DR0, WTW8500DR1, WTW8500DR2, WTW8500DR3, WTW8500DW0, WTW8500DW1, WTW8500DW2, WTW8500DW3, WTW8700EC0..
Check Stock

Wyin CO2 Regulator Aquarium 12V DC CO2 Solenoid Pressure Adjustable with Big Dual Gauge Display, Bubble Meter can be Connected, Check Valve, Aquarium Co2 Kit Fits Two Standard US Tanks

  • 【Peace of Mind After Sale】 In order to improve your sense of the use of our product, we provide an additional set of accessories (copper tube+spring iron) for the solenoid valve of this product. If your solenoid valve reaches the service life, you can replace it yourself to extend the service life of the product. If you have any questions, please feel free to contact us!.
  • 【Can be Used for Multiple Aquariums】The CO2 regulator aquarium kits is equipped with multiple bubble meters that can be connected to multiple aquariums at the same time. It is simple and convenient to operate. The module of the bubble counter can be purchased in this shop.
  • 【New upgrade bubble counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
  • 【Waterproof Solenoid Valve 】 Our co2 solenoid valve adopts the new integrated injection molding technology, which is waterproof and do....
Check Stock

WR57X10032 WR57X33326 Refrigerator Water Inlet Valve by Techecook - Dual Solenoid Compatible with GE Hotpoint Refrigerator - Replaces AP3672839 WR32X10032 PS901314 AP3192626 WR57X98-365 DAYS WARRANTY

  • ✅ 【WATER VALVE WR57X10032】---GE refrigerator water valve assembly WR57X10032 supplies water to the ice maker and water dispenser in the....
  • ✅ 【COMPATIBLE MODEL】--- WR57x10032 water inlet valve replacement fit G-E Hot-point Refrigerator.Replaces part numbers: 880070, AP3192626,....
  • ✅ 【365 DAYS WARRANTY】--- Risk-free shopping. If Solenoid valve WR57X10032 WR57X33326 ge water valve has any quality problems, we support to....
  • ✅ 【DIY INSTALLATION】--- If your water dispenser leaked water or if the cold water is not coming out of the water dispenser, or if the ice maker....
  • ✅ 【HIGH QUALITY】 --- The replacement ge wr57x10032 water valve is made by durable high quality material and well-tested by the manufacturer....
Check Stock