Reviews Hot Surface Igniter

601 1104 - Norton OEM Replacement Furnace Ignitor Igniter

  • White Rodgers Hot Surface Furnace Igniter stock number 767A-380..
  • This igniter replaces Robertshaw number 41-604, Norton number 601, 601XBM and OE number 44744-2..
Check Stock

MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers

  • 120 volt nitride furnace igniter Replaces hot surface ignitor for gas-fired furnace, boiler, and water heater.
  • How to tell if your igniter is working， if the igniter has continuity your multimeter should read anywhere from 9 to17 Ohms,if there is no reading on the multimeter or very little change, then there is no continuity and you will have to replace the nitride furnace igniter.
  • 1.97" Nitride heating element, 1.18"Ceramic insulator body nonglazed 95% alumina- polished finish, 15-3/4 inch temperature rating 250℃ cable- 20 AWG/ UL 10362 specification.
  • It works compatible with Cook Top, Cook Top and Range, Furnace and Warm Air Movement, Gas Ignition, Hot Surface Igniters, Infrared light source, Pool Heater and Boilers, Process Machinery, Special FX, Water, and Parking Heaters Nitride heating element.
  • Power rating:150 W. Temperature at 120v ± 0.5v .60HZ at 17 sec ≧1180 ℃.This is a very versatile product, very robust with long cycle life. Silicon nitride is extremely rugged and can be handled without fear of breakage or contamination..
Check Stock

EvertechPRO SSN24 Silicon Nitride Hot Surface Igniter Kit Replacement for Universal HVAC 1009524 1149856 42640001 68012

  • ❖ EvertechPRO HVAC Replacement Silicon Nitride Hot Surface Igniter Kit Part Number SSN24 replaces 1009524 1149856 42640001 68012 AFN643 IG9500 L43-724 MM643KX Q3400A Q3400A1016 Q3400A1024 Q3400A1040 Q3450 Q3480 Q3620 SV9401 SV9402 SV9403 SV9500 SV9500M2603 SV9500M2674 SV9500M2682 SV9501 SV9501M2528 SV9502 SV9503 SV9600 SV9600H SV9601 SV9602.
  • ❖ Durable Premium Silicon Nitride Hot Surface Igniter Kit is a Functional Equivalent to OEM Specifications. Brand New in Original Retail Packaging.
  • ❖ Replacement part number: SSN24 Fits For Most Top Brand HVACs.
  • ❖ 1 - Year Warranty Guarantee or No Questions Asked 90 Day Return..
Check Stock

Hot Surface Oven Igniter, Capilary 12in L

  • Price For: Each Item: Hot Surface Oven Igniter Type: Igniter Gas Type: Nat and LP Dial Range: 3.2 to 3.6A Replaces: 7432P025-60, 7432PO52-60/K 08067970 142-224, 336650, 4163781, 4392019, 316T023P03/P07/P10/P12/S01, F16-743, 7432P062-60/K, 08067970, 316t023P03/P07/P10/P12/801 Mounting Position: All Mounting Positions, Electrical Lead 7-1/2″ L Capillary Length: 12″ Includes: (2) Porcelain Wire Nuts.
  • Country of Origin (subject to change): United States.
Check Stock

767A-380 44744-2 601 41-604 for Norton Igniter White Rodgers Furnace Ignitor XBM

  • 767A-378 Furnace Hot Surface Ignitor for Norton 601 601TB 20165702.
  • Hot Surface Furnace Ignitor stock # 767A-378..
  • This igniter replaces Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
  • This Ignitor has a 2-1/4" long from bracket to end of ignitor..
  • 5" Wire Leads with Plug, wire nuts included..
Check Stock

767A-378 White Rodgers Furnace Hot Surface Ignitor for Norton 601 601TB 20165702

  • 767A-378 Furnace Hot Surface Ignitor White Compatible with Norton 601 601TB 20165702.
  • Includes (1) Furnace Hot Surface Ignitor as pictured.
  • Part number # 767A-378. This igniter Compatible with Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
  • This Ignitor has a 2-1/4" long from bracket to end of ignitor. 5" Wire Leads with Plug, wire nuts included. 120V..
Check Stock

Furnace Ignitor Igniter Directly Replaces Rheem 62-22868-02

  • Made from high-purity recrystallized silicon carbide (crystar) which combines physical and thermal strength with stable electrical properties.
  • Designed to reach ignition temperature(s) within 17 seconds.
  • Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity.
  • Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection.
  • Operate at 120 vac. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120 vac..
Check Stock

UOEIS Furnace igniter replacement number for igniter 0230K00001 201657-03S 601TB IGN02004 Genuine OEM part

  • Furnace igniter for igniter Genuine OEM part.
  • Surface igniter, silicon nitride furnace igniter,.
  • Includes mounting bracket, plug adapter and instructions.
  • Replacement number 0230K00001, 201657-03S, 601TB, IGN02004, B1401015S, B1401018S and AP4514330.
  • Designed for specific furnace models suitable for manufacturing.
Check Stock

Replacement for 767A-379 White Rodgers Furnace Hot Surface Ignitor for Norton 601 025-33421-000

  • White Rodgers Hot Surface Furnace Ignitor stock # 767A-378..
  • This igniter replaces Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
Check Stock

OEM ICP Furnace Hot Surface Ignitor Igniter 1172533

  • This is a Brand New OEM Furnace Hot Surface Ignitor Igniter.
Check Stock

AO Smith XCVT-50-LP Residential LP Gas Water Heater

  • Intelli-vent gas control models, equipped with silicon nitride hot surface igniter.
  • Factory installed heat trap nipples-standard on all models.
  • Quiet, modular blower-equipped with 110/120 volt electrical system.
Check Stock

Heavy Duty PP200SC HA1000 PP200 102548 Hot Surface Igniter Kit

  • This is a 120 volt unit. It will NOT work in Europe..
  • Part numbers replaced by the PP200SC Igniter are 102548-03, 102548-01, PP200, HA1000 71-052-0700 and more..
  • The PP200 was For heaters . Brands include Master, Reddy, Remington, Knipco, LB White, All-Pro, John Deere, Dayton and more,DESA.
  • PP200sc / HA1000 / PP200 Hot Surface Ignitor Kit.
Check Stock

2 Pack Replacement for Pit Boss Hot Rod Ignitor Kit, Hot Igniter Kits Compatible with Pitboss& Camp Chef Pellet Grill, Comes with 2pc Fuses

  • REPLACE ORIGINAL IGNITION RODS - Compatible with most Pit Boss Grill models(Except PTG), Camp Chef and Oklahoma Joes Rider DLX Wood Pellet Grills models..
  • INSTALLATION TIPS - Hot rod connects in the base of the fire pot, to avoid damage to the ignition rods, only put the hot rod igniter 1/8-1/4 inch into the burn pot..
  • HEATING ELEMENT DETAILS - 200 watt/ 120 volt, 24" wire lead, grill Hot Rod Ignitor comes with 2pc fuses..
  • KEEP THE BARBECUE FIRE - Just press the switch, the grill igniter can re-ignite the hardwood, allowing you to enjoy a delicious barbecue..
  • FRIENDLY SERVICE - If you have any questions, please contact us through Amazon Messenger..
Check Stock