Reviews Hot Slip Film

Artificial Grass Seaming Turf Tape Self- Adhesive Single-Sided 6 Inch Width x 390 Inch Long Synthetic Seam Tape Jointing Fixing Fake Grass Carpets Connecting Green Lawn Mat Rug

  • 【Durable Material】This Artificial Grass Joint Tape is made of non-woven fabrics and PE release film, coating with hot melt adhesive pressure sensitive adhesive. It's very sticky and strong and durable, non-slip and it also can increase friction. Eco-friendly, pet friendly, child safe..
  • 【Save Time And Money】Abandoning the traditional method of pasting the lawn with glue, just stick the lawn tape on the seam of the two lawns of connect, and the non-woven fabric at the bottom plays a role of non-slip, saving the cost of splicing tape and glue..
  • 【Strong And Durable】Strong self-adhesive with center peel release paper, good for all coarse surface types. Strong adhesion,Non-slip, increase friction,Strong self-adhesive with center peel release paper makes joint tape waterproof ensure an extremely long-term durability..
  • 【Easy To Use】Artificial grass tape is specially used for jointing together two pieces of fake grass, just remove the release film and stick it to the back of synthetic grass. Especially for rough surfaces and increase friction arthe bottom of artificial turf..
  • 【Widely Use In】Commercial usage applicable¡ both indoor or outdoor multi-use. Perfect for yards, golfing, parks, schools, or to spruce up any open space or firm ground! ....
Check Stock

TOMALL 78.7''x12'' Navy Blue Vinyl Film for Car Headlight Taillight Fog Lights Tint Self Adhesive Decals Sports Modification Car Stickers (Navy Blue)

  • ✔Vinyl Film - The size of this sticker is 78.7'' x 12'' (200cm x 30cm). It is made of vinyl material, stretchable, heat-resistant and waterproof, and comes with a self-adhesive, which makes it easy to stick..
  • ✔Change Color - This film can be used to change the color of your car's headlights/taillights/foglights, which is very personalized. Note: For your safety, it is recommended that the dark black film is only used on the taillights..
  • ✔How to Install - Clean the dust of the headlights and spray water, then tear off the two layers of the sticker, spray water on the adhesive, to facilitate adjustment when pasting, and heat with a hot air gun during the installation process so that the sticker can be Stretch and stick to the lights, and use a scraper to remove water and air bubbles to make the sticker more fit..
  • ✔Attention - When using a hot air gun, do not continue to blow the same place for too long, otherwise the film will be too hot and the film will be uneven or scratched when it is scraped. Just use hot air evenly. TIPS: If you are worried that you cannot install it well, or want to save time, you can ask a professional to install it..
  • ✔Come and Buy - The package contains 1 roll vinyl film, the size is 78.7'' x 12''/ 200cm x 30cm, which ca....
Check Stock

Fiunkes Pool Ladder Above Ground Pool, Thicken 304 Stainless Steel Pool Ladders for Outdoor, 4 Steps Pool Steps Ladder Heavy Duty, Max Load Capacity 500 Lb Ladders for Backyard Above Ground Pool

  • ● Double Sided Above Ground Pool Ladder: The ladder works for all above ground pools with flat bottoms. Getting in and out of your pool just got a whole lot easier! No longer will you have to worry about your pool ladder tipping over or you slipping.
  • ● Stable Construction: The double side pool ladder above ground pool is made of sturdy 304 stainless steel frame and thickened ABS advanced plastic pedals. (wall thickness 1.1 mm) Maximum load capacity is 500 dbl.
  • ● Non-slip & Safety: In addition, Thickened ABS advanced plastic pedal more heat-resistant and not hot feet. and can also be used for foot massage. Two Firm handles for added safety. It is beautiful, comfortable and safe.
  • ● New foot pad, safe and non-slip: The feet are more stable and firm and can effectively prevent the friction between the ladder and the glue film Pool from scratching the glue film.
  • ● Easy to install and stable: Fix the pedal to the ladder body on both sides with screws, and then tighten the nuts. Removable and easy to install.
Check Stock

DTF Powder White Digital Transfer Hot Melt Adhesive 500g, DTG Pretreat Powder for Epson Printer DTF DTG Printer Direct Print on All Fabric Include Jeans Cotton T Shirt Textile etc

  • ... on Jeans, Lycra, cotton, Polyester, nylon, leather, EVA, Blends and many other material.
  • and on all color include black white dark light. Design on hoodies, canvas, tote bags, T-shirts, pillow cases, caps, gloves, sneakers, phone cases etc..
  • VIVID COLOR & WATERPROOF. The DTF Hot Melt Powder for DTF transfer ink and film is TPU material, feels soft and stretchy and offers high adhesion. The DTF Powder will stick to the ink instead of the film, provide bright, vivid color. Waterproof and Washable, Durable..
  • FOR INKJET PRINTER & DTG DTF PRINTER. The DTF transfer powder work with all DTF&DTG inkjet printers, include epson printer, DTG DTF printer L1800 F2100 ET4700 XP15000 Printers. And work with any PET film size..
  • HIGH QUALITY & FEATURE.The DTF hot melt powder is 80-200um, works with both automated shaker and hand-application. Work with both hot and cold peel PET films for high production output..
  • PACKAGE INCLUDE & 100% SATISFY GUARANTEE. 500G HOT MELT POWDER. NOTE: To use the DTF Transfer Adhesive, you need a DTF printer and DTF film (not included in the package). Please apply full refund if any unhappy, we will try our best to make you smile..
Check Stock

DTF Powder Black Digital Transfer Hot Melt Adhesive 499g, DTG Pretreat Powder for Epson Printer DTF DTG Printer Direct Print on All Fabric Include Jeans Cotton T Shirt Textile etc

  • ... on Jeans, Lycra, cotton, Polyester, nylon, leather, EVA, Blends and many other material.
  • and on all color include black white dark light. Design on hoodies, canvas, tote bags, T-shirts, pillow cases, caps, gloves, sneakers, phone cases etc..
  • VIVID COLOR & WATERPROOF. The DTF Hot Melt Powder for DTF transfer ink and film is TPU material, feels soft and stretchy and offers high adhesion. The DTF Powder will stick to the ink instead of the film, provide bright, vivid color. Waterproof and Washable, Durable..
  • FOR INKJET PRINTER & DTG DTF PRINTER. The DTF transfer powder black work with all DTF&DTG inkjet printers, include epson printer, DTG DTF printer L1800 F2100 ET4700 XP15000 Printers. And work with any PET film size..
  • HIGH QUALITY & FEATURE.The black DTF hot melt powder is 80-200um, works with both automated shaker and hand-application. Work with both hot and cold peel PET films for high production output..
  • PACKAGE INCLUDE & 100% SATISFY GUARANTEE. 500G HOT MELT POWDER. NOTE: To use the DTF Transfer Adhesive, you need a DTF printer and DTF film (not included in the package). Please apply full refund if any unhappy, we will try our best to make you smile..
Check Stock

TOMALL 78.7 x12 Golden Yellow Vinyl Film for Car Headlight Taillight Fog Lights Tint Self Adhesive Decals Sports Modification Car Stickers Golden Yellow

  • ✔Vinyl Film - The size of this sticker is 78.7'' x 12'' (200cm x 30cm). It is made of vinyl material, stretchable, heat-resistant and waterproof,....
  • ✔Change Color - This film can be used to change the color of your car's headlights/taillights/foglights, which is very personalized. Note: For your....
  • ✔How to Install - Clean the dust of the headlights and spray water, then tear off the two layers of the sticker, spray water on the adhesive, to....
  • ✔Attention - When using a hot air gun, do not continue to blow the same place for too long, otherwise the film will be too hot and the film will be....
  • ✔Come and Buy - The package contains 1 roll vinyl film, the size is 78.7'' x 12''/ 200cm x 30cm, which can meet your requirements. If you have any....
Check Stock

AERVOE Brite GALVANIZE Coating 65% ZINC Rich

  • A glistening coating with 65 percent pure zinc in dry film.
  • Stops rust and corrosion on any iron or steel surface for protection equal to or better than hot-dipped galvanizing.
  • Restores galvanized surfaces to the bright look of hot-dipped galvanizing.
  • Meets performance requirements of astm a-780.
  • Good film integrity after 500 hours salt spray (astm b-117).
Check Stock

Crown 7008 Brite Galvanize Coating 65% Zinc Rich, Metallic

  • A glistening coating with 65 percent pure zinc in dry film.
  • Stops rust and corrosion on any iron or steel surface for protection equal to or better than hot-dipped galvanizing.
  • Restores galvanized surfaces to the bright look of hot-dipped galvanizing.
  • Meets performance requirements of astm a-780.
  • Good film integrity after 500 hours salt spray (astm b-117).
Check Stock

DTF Transfer Film Paper PET Heat Transfer Paper A3 (30sheet), Double-Sided Glossy Clear Pretreat DTF Film for DTF Epson Inkjet Printer, Direct Print On T-Shirts Textile (11.7' x 16.5')

  • 【Superb Glossy Sheets】DTF film is designed for double-sided coating. The print side is a non-slip coating and the reverse side is smoother than the print side to help you differentiate. NOTE: The effect of using the cold peel operation is more stable than the hot peel..
  • 【No Need WEEDING】No Pretreat DTF transfer film saves you time and money. Can be created, printed and cut to your desired size and printed directly on any fabric..
  • 【Vivid Color and Durable】DTF transfer paper has a high color yield, and the high transfer rate accomplishes vivid, clear colors. Washable, soft to the touch and durable. (Note: You need to prepare DTF printer, DTF ink, DTF powder).
  • 【Works with All Fabrics】DTF paper is suitable for all color fabrics, including dark, black, bright, white, etc. Works with all material fabrics: including cotton, jeans, leather, blends, spandex, nylon, canvas, polyester, etc..
  • 【Wide Application】Compatible with all DTF printers, including epson inkjet printers L1800 F2100 ET4700 XP15000. Note: Please prepare DTF film, DTF ink, DTF powder, DTF printer in advance before starting your pattern transfer. If you have any questions, please contact us any time..
Check Stock

LITA Artificial Grass Tape 6in x 16.4ft, Self-Adhesive Seaming Turf Tape Lawn Adhesive Synthetic Turf Seam Glue Lawn Tape for Joining Fake Grass Carpet Joint Tape Connecting Lawn Mat Rug (15CM X 5M)

  • HIGH QUALITY MATERIAL: This Artificial Grass Joint Tape is made of non-woven fabrics and PVC film, more solid and durable, higher adhesive strength, Convenient-to-use. Quick and easy to carry, Strong adhesion,Non-slip, increase friction,Strong self-adhesive with center peel release paper makes joint tape waterproof..
  • SAVE TIME AND MONEY: Connect artificial turf or outdoor carpet together. Simple operation, a joining tape to seamlessly connect two pieces of synthetic turf together. Need not glue the whole back side. Just cover the proper length tape on the joint of artificial turfs..
  • PERFORMANCE: This artificial grass tape is non-woven fabric based (dark green), with hot melt pressure sensitive adhesive, liner with white PE film. The nonwoven fabric back provide good friction. The hot melt glue can resistant 60 C to -10 C. If it has used on artificial grass, it can use in most temperature environment.This artificial grass seam tape is waterproof, weatherproof and UV resistant..
  • EASY TO USE: Featured as a double-sided non-adhesive, our seam tape is 6 inches wide and works great for any synthetic turf seaming process. This tape can also be applied in conjunction with turf adhesive, The adhesive should be applied to the dull side of the tape. artificial gra....
Check Stock

Single Large Boat Shrink Wrap Kit - Heat Gun, Tools & Accessories - Includes Shrinkfast 998

  • ... the nozzle 5-6cm distance from your items and better to heat it at about a 45 degree angle until completed. The temperature can not be adjusted, but it can reach to about 200°C/392°F in few seconds..
  • Unique Design: The heating gun handing part is made with ergonomic non-slip design that ensure safe hand holding with small energizing. The heat vents of heat gun tail can decreased the internal high temperature and extend the life. Safe Heat Dissipation..
  • Multi Occasion Usage: The mini heat gun can be used for heating shrinkable film, clay, embossed powder, rubber stamp, remove old painting, heat to shrink film, defrost and remove mud and dirt etc. Built-in stand for self-support and table top use..
  • Good Gifts: If you are a DIY fan, this heat air gun could be a good tool for you. It can be used for making handmade candle, rubber stamp and so on. Note: Please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously..
Check Stock

Aervoe 7008 13-Ounce 65% Zinc-Rich Brite Galvanize Coating Aerosol Spray

  • A glistening coating with 65% pure zinc in dry film.
  • Stops rust and corrosion on any iron or steel surface for protection equal to or better than hot-dipped galvanizing.
  • Restores galvanized surfaces to the bright look of hot-dipped galvanizing.
  • Meets performance requirements of ASTM A-780-93A.
  • Good film integrity after 336 hours salt spray (ASTM B-117).
Check Stock

25 Sheets UV DTF Transfer Film Paper A3 Double Sided Thick Glossy Clear Pretreat Sheets, PET Heat Transfer Paper for Epson Inkjet Printer DTG Printer Direct Print On T Shirts Textile

  • INDUSTRY FAVORITE & ALL FABRIC ALL COLOR. The UV DTF transfer paper sheets work for all colored garments including Dark Black Light White Color etc, also for all material fabric including Cotton, Jeans, Leather, Blends, spandex, nylon, Canvas, Polyester etc. An industry favorite products..
  • THICK DOUBLE SIDE & COLD AND HOT PEEL. The white DTF transfer film Sheets Starter Kit is thick double side, evenly coated, so suitable for all DTF printer. For Cold and Hot Peel, the effect of cold peel is better than hot peel so far..
  • NO WEEDING & EASY TO USE. You can create, print and cut to size you want, NO WEEDING. The DTF transfer film for sublimation matte can be Direct printed on any blanks such as T-shirts, pillows, caps , gloves, sneakers etc).
  • COMPATIBLE & VIVID COLOR. The DTF DTG transfer film Sheets work with Epson Inkjet Printers DTG DTF Printers L1800 F2100 ET4700 XP15000 Printer, work with DTF transfer ink and DTF powder. Vivid, Clearly color..
  • SAVE MONEY AND TIME & SERVICE. The direct to vinyl DTF film iron on does not have to be pretreated, save your money and time. Please apply full refund if any unsatisfied, we will try our best to make you satisfied..
Check Stock