Reviews Hot Melt Clip

KN95 Face Masks for Men Women - 50 Pack 10 Colors Disposable Masks, 5-Layer Breathable Cup Dust Mask with Elastic Earloop&Nose Bridge Clip, Filter Efficiency95%

  • 5-Layer Masks: The KN95 mask is made of 2 layers of non-woven fabric, 2 layers of melt-blown fabric, and 1 layer of hot air cotton. Non-woven fabric is soft, non-irritant, non-toxic.
  • melt-blown fabric features high efficiency in filtration.
  • hot air cotton helps absorb the moisture from the breath. The filter efficiency is 95%..
  • 50 Pack & Multicolor - Included 10 colorsArmy green*5Royal blue*5Navy blue*5Brown*5, Wine red*5, Purple*5White*5Black*5Dark gray*5Light gray*5. Colorful life, don't be defined by colors. Try different styles , you can choose them to match different clothes according to your hobby..
  • 3D Shape Design: The KN95 face masks are created in 3D shape, it is designed according to the human face shape to ensure the tightness, which effectively reduces air leakage while providing a smooth breathing. It covers mouth, nose and chin perfectly, a strong fit for most people's faces..
  • Elastic Earloops & Adjustable Nose Clip: The face mask is equipped with high elastic straps, it is soft and durable, which effectively helps eliminate pressure to your ears. The mask is designed with a built-in nose clip, which allows you to squeeze it on the both sides of your nose bridge to make it fit your face well, so as to make the mask greatly avoids unfiltere....
Check Stock

MyClip Compatible Freedom Clever Clip Pod Sensor Blocker for Keurig Single Serve Capsule 2.0 Brewer Models 6 Pack

  • Use only with non-brand pods. Please take out when not in use or when using actual K branded capsules. Does not work with models K250, K425, K460,....
  • Carefully designed and crafted for 2.0 K-Cup Pod single serve brewers. If over used or not removed after use plastic clip might melt or deform causing....
  • Clips over sensor of brewer as shown in picture and allows brewing with all pod tea and coffee brands not directly affiliated with your brewer.
  • Never have the clip installed while only brewing hot water without a pod inserted. Corrosion or damage to the freedom clip may occur.
  • Keurig, K-Cup, and 2.0 are registered trademarks of Keurig Green Mountain, Inc. This product, the manufacturer, and sellers are not affiliated with....
Check Stock

100pcs Hot Melt Strips for Book Binding Machine

  • Thermal Binding Glue Strips, Hot Melt Binding Machine Glue Strips.
  • For paper hot-melt binding or book repair, etc..
  • Length: 11inch, Width: 2mm, 100 pieces, can tear of suitable width according to demand..
  • High quality EVA hot melt with strong stickiness and firm binding.
Check Stock

3M Palm Trigger

  • New OEM replacement Palm trigger for 3M TC & LTs hot melt applicators..
  • Adds comfort and efficiency when applying hot melt adhesive with the 3M(TM) Hot Melt Applicator TC and LT..
  • Must be used in conjunction with the Quadrack converter. 9761. You can create even, smooth adhesive beads comfortably and easily, without ever touching the adhesive..
  • Designed for ease of use and increased output when using the Quadrack converter..
Check Stock

MyClip Freedom Clip Sensor for Single Serve Pod K-Cup 2.0 Brewers Brew Off Brand Capsules Pack of 1

  • Use only with non-brand pods. Please take out when not in use or when using actual K branded capsules. Does not work with models K250, K425, K460,....
  • Carefully designed and crafted for 2.0 K-Cup Pod single serve brewers. If over used or not removed after use plastic clip might melt or deform causing....
  • Clips over sensor of brewer as shown in picture and allows brewing with all pod tea and coffee brands not directly affiliated with your brewer.
  • Never have the clip installed while only brewing hot water without a pod inserted. Corrosion or damage to the freedom clip may occur.
  • Keurig, K-Cup, and 2.0 are registered trademarks of Keurig Green Mountain, Inc. MyClip, products, and sellers are not affiliated with Keurig Green....
Check Stock

Pinnacle 1000 25 lb Box Metallocene Case & Carton Seal Hot Melt Adhesive

  • AGGRESSIVE ADHESION: This is a cost effective, versatile hot melt glue for case and carton packaging applications that forms aggressive bonds with coated and moderately coated cardboard and paperboard substrates.
  • FAST SET SPEED: We designed this adhesive to have high hot tack and aggressive adhesion that work together to provide robust performance on a variety of substrates..
  • WIDE PERFORMANCE RANGE: Wide Service temperature range of performance, ideal for frozen, refrigerator or pantry packaging. Reduce returns of deep-freeze products with a strong bond, which resists extreme cold conditions with a temperature range from -40°F to 140°F,.
  • SAFE USAGE: Non-charring, low odor, and smoke free in your hot melt pots for safe usage while providing superior performance in a variety of situations..
  • HIGH PERFORMANCE ADHESIVES: H.B. Fuller hot melt adhesives offer you the ultimate in performance. Our reliable products ensure excellent bonding, thermal stability, clean machining and low total cost of ownership. Even at extremely low temperatures, our packaging hot melt adhesive line offers the case and carton sealing advantage your business needs..
Check Stock

Wildlife Sciences Suet Balls 24 Pack, 6 Individually Wrapped Packs of 4 Bird Suet Balls (Fruit & Nut)

  • 6 Pack Of Hot Pepper Delight Wild Bird No Melt Suet Dough.
  • No-melt suet is the convenient way to feed wild birds year round..
  • C and S’s unique process creates the only true no melt suet product line..
  • Hot Pepper Delight Suet Dough is made with hot peppers, which taste sweet to birds but keep squirrels out..
Check Stock

100Pcs Thermal Glue Strips 2mm Wide Back for Book Binding Repair Hot Melt Binding Machine Binder Material Supplies

  • Length: 11inch, Width: 2mm, 100 pieces, can tear of suitable width according to demand..
  • Thermal Binding Glue Strips, Hot Melt Binding Machine Glue Strips.
  • High quality EVA hot melt with strong stickiness and firm binding.
  • For paper hot-melt binding or book repair, etc..
Check Stock

MOUKIM Car Dent Puller Suction Cup Dent Repair Puller Car Dent Removal Suction Cup Car Dent Repair Tool for Car Dent Repair, Glass, Tiles and Objects Moving black

  • ...included.You need to buy the Hot Glue Gun by yourself).
  • Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).
  • Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).
  • Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter).
  • Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.
  • (Note: :The 18 gaskets are all made of hard plastic and have no suction itself. It is necessary to melt the glue stick with a hot-melt glue gun and apply it to the gaskets for use).
  • Check with a line board. If dent still exists, knock it slightly with a flattening hammer or pen.
  • Clean the repaired place with a clean wet cloth.
Check Stock

CCW Breathable Face Masks with 5-Layer Protection, 20 Count White Disposable Face Masks

  • 【More safety 5-Layer Structure】Breathable face masks are made of skin-friendly non-woven fabric, including two layers of non-woven cloth, two layers of melt-blown fabric, one layer of hot air cotton. The 5-ply masks are designed for more protection than the 3-ply disposable masks..
  • 【SNUG & COMFY】The 3D shape is designed to ensure tightness on the human face, can cover mouth, nose easily. With stretchable ear loop and metal adjustable nose clip, a comfortable fit and reliable protection always..
  • 【Anti Fall Design 】The metal nose clip is fixed to the inner of the mask. you never need to worry about the Inserted nose clip falling off, and the flexible metal allows you to adjust the mask tightly fits your face.
  • 【Filtration003e95%】Filter Efficiency≥95%, which greatly prevents unfiltered air from entering directly, could be protected from dust, small particles of air, pollen and much more and can protect you at critical moments..
  • 【Widely Use】Lightweight, foldable Masks fit perfectly in a purse, pocket, backpack or glove. Suitable for shopping, public transport, bus terminals, shopping malls, parks and busy city streets. You can take it with you wherever you want to go. The face mask is an excellent choice for protection when you'll b....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

WAKEFIELD SOLUTIONS 19755-XL-AB HEAT SINK, ES RECTANGLE EXTRUSION

  • PROTECT & PRESERVE: In addition to its glue-type purposes, the hot melt liquid functions perfectly for sealing and securing lidding film to hard plastic or paperboard containers and trays.
  • SEMI-PERMANENT ADHESIVE: Designed to last, the semi-permanent heat activated adhesive is conveniently removeable without messy residue even after long-term use to easily pull the film from the container.
  • COMMERCIAL GRADE CAPABILITIES: Maintain and create high-quality projects with the durable and tamper evident torque heat seal through gravure-style application.
  • CONTROLLABLE FLOW: Low-viscosity material encourages improved application control for clean results in any project involving hot melt lidding adhesion.
  • EASY TO USE: Simply heat the hot melt adhesion element to the recommended temperature and apply to appropriate project components for a clean and professional seal.
Check Stock