Reviews Hot Knife Tool

BISupply Electric Rope Cutter Blade Hot 30W - 932-Degrees Fahrenheit Rapid Heat Hot Knife - Synthetic Rope Cutting Tool

  • [Cut and Seal]: BISupply Heated Knife is a thermal blade that can be used to cut ribbon, fabric, plastic, or rope.
  • Hot knife rope cuts materials with a width up to 2 inches (5.1cm).
  • Hot rope cutter also seals rope as it cuts to prevent a mushroom effect and fraying.
  • [Install Anywhere]: 4 pre-drilled holes in base for permanent mounting in your garage, craft room, workshop.
  • Operate in a well-ventilated area to avoid inhaling fumes.
  • 4.75” x 4.2” x 3.1” inch (12.1cm x 10.7cm x 7.9cm) base, 2.1-inch (5.3cm) wide blade surface for finishing touches and melt fibers.
  • Includes brush with 5-inch (12.7cm) handle.
  • [Easy to Use]: Unscrew knife holder with the included T-bar hex key, place the 2 blade legs in the knife holder, tighten screws, then connect to an appropriate power connection.
  • To use, turn the power switch to the “on” position, place your material to be cut on the blade, and turn the power switch to “off” after cutting.
  • [Built to Last]: AC 120V, 60Hz, 30W power.
  • 932-degrees Fahrenheit (500°C) blade temperature.
  • Cuts and quickly heats to continuous high temperature (we recommend not leaving the hot knife cutting tool on for extended periods).
Check Stock

Electric Knife Hot Knife Foam Cutter Foam sculpture hot knife cutter Foam Cutter

  • This tool kit complete with one 200W Hot Knife.
  • one pcs 15cm Blade and one pcs 20cm Blade and one pcs Groover and one pcs 30cm Bendable Blade The styrofoam groover is combined by hot knife....
  • 120V,200W,Heats up in just about 10 secondsLong life span and can non-stop run.
  • It can used together with different type blades,and it can be used for cuting different materials.
  • Notices:Intermittent operating for the tool, suggest that loosen the switch for a second after 30 seconds’ working (otherwise it may cause overheat....
Check Stock

Capri Tools Multi-Angle Butane Soldering Iron Kit

  • Multi-angle, multi-function butane soldering iron with interchangeable tips lets you take care of soldering, cutting, shaping, and more with a single tool.
  • 6 interchangeable tips for soldering and cutting (soldering tip, sharp knife, anvil tip, chisel tip, needle tip, hot knife), and 1 deflector attachment for shaping.
  • Transform the tool easily into a hot blower or an open flame micro butane torch for a wide variety of heating, shaping, and material removing applications.
  • Multi-angle positions at 5°, 45°, and 90° adjustable with a simple press of a button, 4 flame intensity settings, safety ignition lock, and a magnetic handsfree base stand.
  • Transparent fuel window lets you see when the fuel tank is filled and when it's near empty. Refill with butane gas designed for lighters and torches.
Check Stock

HOGARD 18\ Pro Taping Knife | Premium Stainless Steel Blade with a Soft Grip | Best Drywall Taping Tool

  • Highest-quality stainless taping knife - The blade is made of highest-quality, solid, corrosion-resistant, stainless steel. Was crafted using premium manufacturing practices. The aluminum profile ensures our taping knife remains perfectly straight and flexible. It’s the ideal drywall taping tool..
  • Ideal, smooth finish - Our top-quality taping knives are designed to apply and smooth gypsum plaster. The sharp, nonstick blade will easily give you straight lines in your joints and repairs. Thanks to the aluminum profile, ensures an ideal, smooth finish when you’re working with spackle..
  • Ergonomics matter - We design our taping tools taking special care with hand-grip ergonomics. We want to keep your wrists safe even if you work for a long time. The comfortable, nonslip rubberized handle grip will not cause hand cramps, and the top-quality materials will ensure the tool’s long life. As a signature of our high quality, we brand each drywall taping tool..
  • Innovative technologies - We particularly focus on our products’ quality and our clients’ satisfaction. Our constant investments in innovative manufacturing technologies increase our production effectiveness and improve delivery standards. We have all the sizes you need: a 6-inch drywall knife, a 10....
Check Stock

HOGARD 24 Pro Taping Knife | Premium Stainless Steel Blade with a Soft Grip | Best Drywall Taping Tool

  • Highest-quality stainless taping knife - The blade is made of highest-quality, solid, corrosion-resistant, stainless steel. Was crafted using premium manufacturing practices. The aluminum profile ensures our taping knife remains perfectly straight and flexible. It’s the ideal drywall taping tool..
  • Ideal, smooth finish - Our top-quality taping knives are designed to apply and smooth gypsum plaster. The sharp, nonstick blade will easily give you straight lines in your joints and repairs. Thanks to the aluminum profile, ensures an ideal, smooth finish when you’re working with spackle..
  • Ergonomics matter - We design our taping tools taking special care with hand-grip ergonomics. We want to keep your wrists safe even if you work for a long time. The comfortable, nonslip rubberized handle grip will not cause hand cramps, and the top-quality materials will ensure the tool’s long life. As a signature of our high quality, we brand each drywall taping tool..
  • Innovative technologies - We particularly focus on our products’ quality and our clients’ satisfaction. Our constant investments in innovative manufacturing technologies increase our production effectiveness and improve delivery standards. We have all the sizes you need: a 6-inch drywall knife, a 10....
Check Stock

WINONS Hot Knife Cutting Tool, WHK0007 Hot Knife Plastic Cutter Tool also Effective as a Foam Board Cutter and Stencil Cutter, with Upgraded Blades and Retainers

  • UPGRADE: In our previous models, the blades and retainers came with two separate pieces, and the retainer broke in some cases. For the WHK0007 Hot Knife Tool, we have upgraded the blades and retainers to be one piece with improved metal, minimizing the possibility of retainer breakage..
  • VERSATILITY: WHK0007 Hot Knife Cutter has 3 Upgraded blade nozzles with different shapes that allows it to use on a variety of materials such as plastic, stencil, foam board, fabric, and even for rope cutting..
  • PACKAGE INCLUDES: Total of 6 pieces which includes - 25W handle, 3 hot knife nozzles, 1 safety stand, 1 user manual..
  • TESTING: While the free hand method empowers you to bring your artistic ideas into reality, we recommend testing on a sample of foam or plastic you’ll be using to acquire hands on practice. The tool is suitable for low density foams and thin plastic sheets with up to 3 mm thickness.
  • CUSTOMER SUPPORT: We offer 6 months money-back warranty for any pertinent issue reported and a 24/7 customer support for our valuable customers.
Check Stock

Feet Scraper Knife Manicure Pedicure Pedicure Tool Scraper,Manicure Kit Scraper Cleaner Stainless Steel Foot Care Callus Exfoliating (Silver)

  • 【Magic Happens 】Most important make sure your feet are slacked, warm or hot water, before use our magic little tool, and smooth foot file after. Your feet will be baby soft and smooth..
  • 【Super Sharpe Super Light】Say no to useless heavy tool, try our little magic sharpened foot file knife, meet the magic, we promise your feet will be as perfect as baby feet. Big surprise for your loved one..
  • 【Travel tool】Carry it anywhere and everywhere, it is not only can be used as foot file, but also cause it is so sharp, can be use as a small knife or some other purpose..
  • 【A Perfect Feet or Full Refund】 A new baby soft smooth feet tonight, just please slacked your feet with hot water ,the scraper will do a beyond perfect job, if not ,we provide a full refund..
Check Stock

Electric Rope Cutter, Smooth Cutting Hot Knife Thermal Blade PE Red Copper 45W Durable for Synthetic Fabrics(#1)

  • Quick Cut: The hot knife cuts fabrics and ropes smoothly and quickly, sealing the edges ly, leaving no debris, no loose edges, and no burrs..
  • Rapid Heating: The hot knife can up to 650℃ in 10 seconds and ensures the right temperature for any job, saving time and convenience..
  • Industrial Tool Kit: This electric rope cutter is an industrial grade tool, suitable for commercial and industrial use, and is a very professional piece of equipment..
  • Complete Set: The set includes a 45W thermal cutter, a 2in cutting blade, hex key and brush, complete with accessories..
  • Cuttable Materials: The thermal cutter can cut synthetic fabrics, cloth, cords, webbing, belts, ribbons and more, which has various application..
Check Stock

Synthetic Rope Cutting Tool, Hot Knife Rope Cutting Machine Industrial 45W PE Red Copper Smooth Cutting for Synthetic Fabrics(#1)

  • Quick Cut: The hot knife cuts fabrics and ropes smoothly and quickly, sealing the edges ly, leaving no debris, no loose edges, and no burrs..
  • Rapid Heating: The hot knife can up to 650℃ in 10 seconds and ensures the right temperature for any job, saving time and convenience..
  • Industrial Tool Kit: This electric rope cutter is an industrial grade tool, suitable for commercial and industrial use, and is a very professional piece of equipment..
  • Complete Set: The set includes a 45W thermal cutter, a 2in cutting blade, hex key and brush, complete with accessories..
  • Cuttable Materials: The thermal cutter can cut synthetic fabrics, cloth, cords, webbing, belts, ribbons and more, which has various application..
Check Stock

Hot Knife Rope Cutting Machine, Rapid Heating 45W PE Red Copper ABS Housing Synthetic Rope Cutting Tool Industrial for Synthetic Fabrics(#1)

  • Quick Cut: The hot knife cuts fabrics and ropes smoothly and quickly, sealing the edges ly, leaving no debris, no loose edges, and no burrs..
  • Rapid Heating: The hot knife can up to 650℃ in 10 seconds and ensures the right temperature for any job, saving time and convenience..
  • Industrial Tool Kit: This electric rope cutter is an industrial grade tool, suitable for commercial and industrial use, and is a very professional piece of equipment..
  • Complete Set: The set includes a 45W thermal cutter, a 2in cutting blade, hex key and brush, complete with accessories..
  • Cuttable Materials: The thermal cutter can cut synthetic fabrics, cloth, cords, webbing, belts, ribbons and more, which has various application..
Check Stock

Aolloa Hot Foam Cutter, 4 in 1 Foam Cutter Set With 240V / 18W Digital Voltage Controller, Hot Cutting Set ,Electric Cutting Machine Pen Tools Kit Wire, Mark Pen, For Polyethylene Styrofoam Carving

  • 4 TOOLS IN 1：With digital voltage controller, it's easier and safer for everyone to use it. 8w high power with Ul approved power supply and On / Off safety button, 12cm & 7cm wand style hot knife, 5cm bending style hot knife, 18cm bow hot blade, 10m replacement wire for bow, cutter holder. All of this hot foam cutter have light indicator and On / Off safety button, CE approved..
  • SMOOTH CUTTING & Clean: It heats up quickly, the tube will reached 150℃ within 8-15 seconds. It cuts the KT board or styrofoam smoothly cut like butter, and leaves No Debris..
  • BEST QUALITY: This foam cutting set is the most cost-effective tool. This foam cutting tool is made of high quality stainless metal and having longer service life. It is an indispensable tool for foam cutting and engraving..
  • Widely Fit MOST Types of Foam: You can cut foam from any angles and craft your own masterpiece, such as Halloween Costumes, Handmade Practice, Even Model Making Lessons by kids at school. Perfect for Eva foam, styrofoam, insulation foam, polyurethane foam, polyethylene foam, foam poster board, upholstery foam, PE foam, foam board....
Check Stock

HOST All in One Bartender Multitool Set | 10 in 1 Tool - Strainer | Muddler & Reamer | Stirrer | Jigger | Zester | Corkscrew | Bottle Opener | Knife & Channel Knife Bar Essential Equipment Kit

  • ...der makes sure you’re always ready to shake things up. Handy and compact, this bar tool is 8.75″ H x 2.2″ W.
  • THE ULTIMATE BAR TOOL - This stainless steel tool includes strainer, muddler, citrus reamer, stirrer, bottle opener, corkscrew, double jigger measure, channel knife, knife, and citrus zester. It’s like a utility multi tool for your bar.
  • IDEAL FOR CAMPING OR TRAVELING - Take this versatile bar tool on camping trips so you can mix up craft cocktails anywhere you go. Perfect for traveling, picnics in the park, or making cocktails on a hot day at the beach.
  • GREAT GIFT FOR A BARTENDER ON THE GO - Give this portable bar tool set to anyone who loves making cocktails no matter where they are. Great birthday gift, groomsman gift, bartender gift, or Christmas gift for any mixologist.
  • COMPLETE YOUR HOME BAR - This cocktail gadget is the perfect addition to your home bar. You'll never struggle to find the right tool for the job with this 10-in-1 tool and you’ll always be able to make a wide range of drinks.
Check Stock

RONGTER Foam Hot Knife (200W) - Air Cooled Hot Knife Cutting Tool Electric Hot Knife - Foam Cutting Tool with Blades & Accessories Use Foam Cutter for Engraving and DIY Handmade

  • ... and then use it after the blade is heated. If for any reason you are not satisfied with your purchase, please contact us via message and we will provide the best solution for you.
  • 【ADJUSTABLE POWER, CONTINUOUS-USE】The built-in air cooling system makes the electric hot knife work continuously.The adjustment knob on the top of the hot knife foam cutter can adjust temperature and power. A wide range of adjustments can meet the needs of most industries and works.
  • 【WIDE APPLICATION】RONGTER electric styrofoam cutting tool is suitable for commercial and industrial use. It can cut such as XPS, EPS, Low Density Sponge , Plastic Extruded Board, Foam, Pearl Cotton, KT Board and so on.You can use it for DIY craft projects, handmade practice, even model-making lessons by kids at school.
  • 【PACKAGE INCLUDES】RONGTER foam cutter kits include a RONGTER heat cutter, one 6in and one 8in straight blade, a hard plastic case, a hex wrench, a auxiliary board and a cleaning brush. Ideal for use in architectural modeling, design, and DIY projects in the home, school, or workshop.
Check Stock