Reviews Hot Galvanized Pipe

2 Hole Pillow BLOCK-62MM

Oatey 33402 Mechanical Test Plug, 3 in, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

• End of Pipe Gripper plugs are made with ABS glass-reinforced plates for added strength.
• Extra large zinc wing nut for ease of tightening, no wrench required, and will not rust.
• Natural rubber O-ring for excellent expansion and memory.
• Plug is rated for 17 PSI or 40-ft of head pressure.
• End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
• Galvanized carriage bolt to prevent corrosion.
• Galvanized mechanical plugs have a wide usage range making them effective on most piping material.
• Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.
• Plastic mechanical plugs are premium plugs designed to hold higher pressures.

100 Pcs Garden Staples 6 Inch U-Shaped Landscape Staples,11 Gauge Heavy Galvanized Garden Staples are Suitable for Outdoor Fabric Irrigation Hoses, Artificial Turf Nails, Fixed Fences and Tents.

• Product material: 100 pieces of 6 inch 0.28mm galvanized Landscape Staples, 6 inches long, 1 inch wide. . Selected hot-dip galvanized steel wire material has high strength and toughness High, not easy to break, good gloss..
• Product details: 1. Beveled tip treatment U-shaped floor nails are designed with beveled tips at the bottom, which are more labor-saving, firm and firm, long service life, environmentally friendly and pollution-free. 2. Flat top design 3. The bottom beveled beveled tip design is labor-saving and easy to use Simple 4. Surface hot dip galvanized.
• Applicable scene: used to fix and install various items, grass-proof cloth, mulch and insect-proof net, lawn fixation, sunshade net..
• Easy to install and use: the bottom beveled design makes it easy to penetrate the turf, and the top width can be adjusted to meet your different needs..
• Multiple uses: easy to fix, widely used, artificial turf, landscape fabric, garden net, pet fence, fixed ground pipe, fixed tent. It is very suitable for your home outdoor landscape and courtyard projects..

Gate Fork Latch - 1-3/8\ Fork, Wall Mount for Chain Link Fence Gate | Chain Link Fence Hardware | Gate Latch

• Support Door Weight Up to 500lbs---Tire grade solid rubber material, supper wear-resistant. Hot dipped galvanized finish steel for rust free..
• Universal Use--- Mofeez gate helper wheel rolls easily over concrete/ grass/ pasture ground. If you plan to use it on soft pea gravel, we suggest you put something in the ground along the wheel path for it to ride more smoothly..
• Lift your Gate Up to 8-3/4"--- Diameter:6”. There is 8-3/4" from the bottom of the wheel to the center of where the pipe would attach, so the door could be lifted up to 8-3/4". Width of tire:1-1/2” flat wheel will roll over your driveway's crushed rock surface..
• Only for Round Fencing Pipe--- Helper gate wheel could be used on both pipe farm gates, chain link gates or any other gate that has a bottom ROUND pipe measuring 1-5/8” through 2”. NOTE: Check your gate frame diameter first..
• Easy to Install --- Just prop the gate up to the height you need and attach the wheel on the bottom rail of the gate. Tighten U-bolt nuts securely until helper gate wheel couldn’t slip around the pipe..

Rohn 25 Series 40' Basic Tower (25G)

• INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (5) 45G STANDARD 10' SECTION. 50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete.
• The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*.
• 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design.
• Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information..
• 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. *This kit is shipped via freight only, see below for more information*.

Giantex 7FT Trampoline for Kids with Enclosure Net, 84” Kids Trampoline for Toddlers w/ASTM Approval & Widened Base, Kids Toddler Trampoline for Indoor Outdoor

• ...s, the high quality jumping mat is tear-resistant, providing safe protection and strong bounce..
• [Max Load 220 Lbs]: Giantex toddler trampoline is built with hot-dip galvanizing technology, ensuring stable and safe jumping experience. Widened and curved U-shaped base, with galvanized steel pipe inside as well, is more stable and sturdier to increase stability and prevent your kids from tipping over..
• [Sturdy & Stable Construction]: The kids trampoline for toddlers is constructed by hot-dip galvanized steel pipe inside, ensuring stable and safe jumping experience. Together with widened and curved U-shaped base, the trampoline is more stable and sturdier and prevent your kids from tipping over. Complying with ASTM Safety Specification, we always put kids safety first..
• [Safety Enclosure Net and Seamless Pad Cover]: The high quality enclosure net is made of durable and high-density PE. It is installed outside to provide bigger jumping area for kids. And the waterproof protective pad covers all springs and adopts a seamless design to prevent getting stuck. Moreover, the upper steel frame is covered with soft foam to reduce ....

100 pcs 6 inch U-Shaped Landscape Staples and 10 pcs Fixing Gasket Sets, Garden Landscape Staples are Suitable for Outdoor Irrigation Hoses, Artificial Turf Nails, Fixed Fences and Tents, etc.

• Product material: 100 pieces of 6-inch 0.15mm small galvanized Landscape Staples, 6 inches long, 1 inch wide. 10 pieces of U-shaped floor peg spacers are helpful for fixing the ground cloth. Selected hot-dip galvanized steel wire material has high strength and toughness High, not easy to break, good gloss..
• Product details: 1. Beveled tip treatment U-shaped floor nails are designed with beveled tips at the bottom, which are more labor-saving, firm and firm, long service life, environmentally friendly and pollution-free. 2. Flat top design 3. The bottom beveled beveled tip design is labor-saving and easy to use Simple 4. Surface hot dip galvanized.
• Applicable scene: used to fix and install various items, grass-proof cloth, mulch and insect-proof net, lawn fixation, sunshade net..
• Easy to install and use: the bottom beveled design makes it easy to penetrate the turf, and the top width can be adjusted to meet your different needs..
• Multiple uses: easy to fix, widely used, artificial turf, landscape fabric, garden net, pet fence, fixed ground pipe, fixed tent. It is very suitable for your home outdoor landscape and courtyard projects..

Mofeez Gate Wheel for Metal Swing Gate with 1-5/8\ Thru 2\ Gate Frames, Gate Support Wheel for Chain Link Fence, Prevent Gate from Dragging

• Support Door Weight Up to 500lbs---Tire grade solid rubber material, supper wear-resistant. Hot dipped galvanized finish steel for rust free..
• Universal Use--- Mofeez gate helper wheel rolls easily over concrete/ grass/ pasture ground. If you plan to use it on soft pea gravel, we suggest you put something in the ground along the wheel path for it to ride more smoothly..
• Lift your Gate Up to 8-3/4"--- Diameter:6”. There is 8-3/4" from the bottom of the wheel to the center of where the pipe would attach, so the door could be lifted up to 8-3/4". Width of tire:1-1/2” flat wheel will roll over your driveway's crushed rock surface..
• Only for Round Fencing Pipe--- Helper gate wheel could be used on both pipe farm gates, chain link gates or any other gate that has a bottom ROUND pipe measuring 1-5/8” through 2”. NOTE: Check your gate frame diameter first..
• Easy to Install --- Just prop the gate up to the height you need and attach the wheel on the bottom rail of the gate. Tighten U-bolt nuts securely until helper gate wheel couldn’t slip around the pipe..

Rohn 25G Series 30' Basic Tower Kit

• INCLUDES: (2) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *30' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
• The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
• 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
• Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
• This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.

Rohn 25G Series 20' Basic Tower Kit

• INCLUDES: (1) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *20' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
• The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
• 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
• Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
• This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.

Portable, Progress Solar and Wind Powered Light Tower

• Kit Includes (3) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *40' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
• The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
• Features 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
• Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
• This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.

Rohn 25G Series 50' Basic Tower Kit - Rohn 25G

• INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
• The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
• 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
• Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
• This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.

Generic Metal Storm Collar (16 Inch)

• QUALITY: This storm collar is designed to cover metal flashings to divert water from running down the sides of the pipe. It is constructed using heavy 26 gauge galvanized steel.: This storm collar is designed to cover metal flashings to divert water from running down the sides of the pipe. It is constructed using heavy 26 gauge galvanized steel..
• EASY INSTALLATION: This metal storm collar contains an adjustable tab. Simply bend tab over for a quick and secure fit..
• MULTIPLE SIZES: This item is available in sizes ranging from 3 Inches to 18 Inches in inner diameter.